Some more photos of it in assembly.

- All parts
- DSC_6474.JPG (153.76 KiB) Viewed 1433 times
Base is made of beech wood. Its about 200x150x25mm in size. Holes for supports were made with counterbore drill for M5 socket bolts. On bottom side I used countersink drill so bolts don't stick out.

- Bottom view
- DSC_6477.JPG (153.92 KiB) Viewed 1433 times
Supports are made from aluminium 10mm stick with M5 thread on both ends. Supports are about 200mm long.

- Partially assembled
- DSC_6480.JPG (108.98 KiB) Viewed 1433 times
Upper portion is made out of 110mm thick-walled aluminium pipe about 120mm in length. Holes for bolts were made with same counterbore drill.

- Bolts
- DSC_6481.JPG (79.65 KiB) Viewed 1433 times
Aluminium pipe was in bad shape when I found it but I was lucky enough that my father knows a guy at workshop and he made it a bit nicer for free

I had all materials at home but hex socket bolts.
Total cost was 0.09€ (for hex socket bolts)