ANSI & ISO GON JD40 styled plate/case (MOSTLY SHIPPED)

wafflepc · 01 Sep 2015, 14:42

keysmasher wrote:Is it possible to get the CAD files? I'd like to design an acrylic center section instead of using bolts.

Ill ask Joey Quinn if I can pm you them.

wafflepc · 01 Sep 2015, 14:43

Bbrotha wrote:Oh yes, got it now, they'll definitely provide more stability as you will have two screws on it. I guess an aluminum feet like the ones from gon are needed to provide a better grip to the surface or some kind of stoppers to avoid movement.

Both are ideal. Stoppers in the front to stop screws from hitting the table, and feet in the back.

WhitePlate · 01 Sep 2015, 17:26

Will commit at $30 as well

keysmasher · 01 Sep 2015, 18:12

scott.stamp wrote:
keysmasher wrote: ↑Is it possible to get the CAD files? I'd like to design an acrylic center section instead of using bolts.
Why not both? Cut an hexagonal hole through your center layers to fit the spacer into, then secure the top and bottom to the middle through those. It'd provide a very sturdy mount since the layers can't shift at all and they're being clamped from both sides.

Those McMaster binding posts linked above look like a decent solution also.

Good idea. And the hexagon holes would prevent the hex standoffs from slipping while tightening the screws.

Bbrotha · 01 Sep 2015, 19:49

Do I hear a GB for middle pieces? that would be amazing.

skiwithpete · 02 Sep 2015, 03:13

Bbrotha wrote: ↑Do I hear a GB for middle pieces? that would be amazing.

I'm in!

keysmasher · 02 Sep 2015, 03:18

I wouldn't mind helping with the CAD drawing for a mid section. But this is wafflepc's deal. I will defer to him on this.

Parod · 02 Sep 2015, 07:01

I'm in. Commit at $30

wafflepc · 02 Sep 2015, 22:20

keysmasher wrote: ↑I wouldn't mind helping with the CAD drawing for a mid section. But this is wafflepc's deal. I will defer to him on this.

I wont hold a gb for a mid piece, but i welcome for someone else to.

wafflepc · 02 Sep 2015, 22:20

Parod wrote: ↑I'm in. Commit at $30

Pm me please

samhwang · 03 Sep 2015, 06:06

I'm in.
Will commit at 30$ + international shipping.

PM-ing now.

//EDIT: if this one has the 2 LED holes like the Filco style, that would be suuuuuuuuuuuuuper awesome :"P Guess I'll have to get my drill ready.

also: will these two works as standoff and screws ?
http://www.ebay.com.au/itm/Brand-New-25 ... 1c478c63a9
and
http://www.ebay.com.au/itm/Qty-5-Pan-He ... 35f08cf41e

studyourheart · 03 Sep 2015, 06:30

i was just thinking, is this $30 for the set, or $30 for top and $30 for bottom?

Bbrotha · 03 Sep 2015, 06:38

$30 for both the plate and the bottom piece.

Bbrotha · 03 Sep 2015, 19:20

any updates when we'll receive the invoices?

wafflepc · 04 Sep 2015, 03:31

Bbrotha wrote: ↑any updates when we'll receive the invoices?

Yeah, tommorow.

braidn · 04 Sep 2015, 16:13

WOOT! Any new renders/news of the possible mid pieces/shipping dates?

wafflepc · 04 Sep 2015, 16:51

braidn wrote: ↑WOOT! Any new renders/news of the possible mid pieces/shipping dates?

Ill render a new one right now actually... Once the buy is over and someone wants to make a mid piece buy separately ill send them the files with Joey Quinns permission. Shipping date is udetermined but probably late this month or next month.

wafflepc · 04 Sep 2015, 16:53

A few updates though. If you have ever got something shipped from the us to the EU and you know it is ridiculously expensive, for example, netherlands to us is like $60, you have to add on that much money minus $15.

wafflepc · 04 Sep 2015, 17:03

new renders!

: ANSI.png (42.76 KiB) Viewed 4895 times

: ISO.png (5.79 KiB) Viewed 4895 times

: bottom.png (9.03 KiB) Viewed 4895 times

punkpc · 04 Sep 2015, 17:16

So did stepped caps lock get dumped from the design or is this just a quick mock up?

wafflepc · 04 Sep 2015, 17:32

punkpc wrote: ↑So did stepped caps lock get dumped from the design or is this just a quick mock up?

Was never e]meant to be part of the design.

chzel · 04 Sep 2015, 17:50

[Horns blaring]
Wonky up arrow alert!
[/Horns blaring]

punkpc · 04 Sep 2015, 18:14

wafflepc wrote: ↑
punkpc wrote: ↑So did stepped caps lock get dumped from the design or is this just a quick mock up?
Was never e]meant to be part of the design.

Ok np. Just wondering because of the first render had it. either way... looks good

wafflepc · 04 Sep 2015, 18:15

punkpc wrote:
wafflepc wrote: ↑
punkpc wrote: ↑So did stepped caps lock get dumped from the design or is this just a quick mock up?
Was never e]meant to be part of the design.
Ok np. Just wondering because of the first render had it. either way... looks good

Thanks!

wafflepc · 04 Sep 2015, 20:14

Pmed all buyers for payment!

keysmasher · 05 Sep 2015, 00:09

wafflepc wrote:
braidn wrote: ↑WOOT! Any new renders/news of the possible mid pieces/shipping dates?
Ill render a new one right now actually... Once the buy is over and someone wants to make a mid piece buy separately ill send them the files with Joey Quinns permission. Shipping date is udetermined but probably late this month or next month.

I'm a fresh face here at DT so I don't think I'd be the best to head up a gb for the mid plates. But if anyone wants to take it on, I am willing to help out with the CAD drawings.

dyger · 05 Sep 2015, 03:57

Could you post a render of the ISO plates as well?

samhwang · 05 Sep 2015, 04:01

dyger wrote:Could you post a render of the ISO plates as well?

He just recently posted one. You can scroll up to see.

skiwithpete · 05 Sep 2015, 04:11

chzel wrote: ↑[Horns blaring]
Wonky up arrow alert!
[/Horns blaring]

Has this been noticed // fixed?

wafflepc · 06 Sep 2015, 14:57

skiwithpete wrote:
chzel wrote: ↑[Horns blaring]
Wonky up arrow alert!
[/Horns blaring]
Has this been noticed // fixed?

Oops! Lookslike its only on the ansi file, ill tell joey rightaway!