Page 5 of 292
Posted: 09 Jul 2015, 17:20
by hammelgammler
That was fast...
Then my theory was right with it. Then I would like a solid case as well, rather than a layered one.
Posted: 09 Jul 2015, 17:21
by andrewjoy
if you are milling it can we get it made out of a block of stainless
only kidding that would be insane price !
Posted: 09 Jul 2015, 17:22
by Muirium
Cast and machined are both solid. Like this:
http://deskthority.net/keyboards-f2/rea ... 11074.html
Layered meanwhile is like this:
http://deskthority.net/group-buys-f50/l ... ml#p133887
That's my board. It was fun making it. But really, there is no comparison. I have no place for another layered board in my life. Solid is the way to go. Period.
Posted: 09 Jul 2015, 17:58
by Ellipse
OK layered sounds like not as good an idea. I was thinking a flat aluminum top piece and bottom piece along with four side pieces but I will try to redesign the case to be more easily CNC machined if no good quotes come in. I may try to make it primarily one aluminum block if it will save on costs.
Posted: 09 Jul 2015, 18:14
by Muirium
Solid alu: nice!
Posted: 09 Jul 2015, 18:27
by Redmaus
Maybe engrave an big IBM on outside of the case?
Posted: 09 Jul 2015, 19:09
by Ellipse
Sorry no logos. The buckling spring patents have long expired but IBM still trademarks its logo.
Posted: 09 Jul 2015, 19:11
by Muirium
Three other letters in the same font will do. Suggestions?
Posted: 09 Jul 2015, 19:12
by Redmaus
Ellipse wrote: ↑Sorry no logos. The buckling spring patents have long expired but IBM still trademarks its logo.
Ask IBM?
Posted: 09 Jul 2015, 19:12
by wlhlm
I'd prefer to not have any logo on the front.
Posted: 09 Jul 2015, 19:19
by Redmaus
wlhlm wrote: ↑I'd prefer to not have any logo on the front.
Or we could have swappable badges.
Or no logo at all ;(
Posted: 09 Jul 2015, 19:20
by gosinger
Muirium wrote: ↑Three other letters in the same font will do. Suggestions?
HAL?
Posted: 09 Jul 2015, 19:21
by Muirium
I'm sure HAL himself would like it!
Posted: 09 Jul 2015, 19:22
by Redmaus
What about a DT badge?
Re: Brand New F62 Kishsaver / F77 Industrial Model F's made this year
Posted: 09 Jul 2015, 19:24
by seebart
Redmaus wrote:What about a DT badge?
Yeah like those DT stickers from webwit but bigger.
Posted: 09 Jul 2015, 19:32
by Muirium
Some ideas…
- 458155770.133670.jpg (8.03 KiB) Viewed 8835 times
- 458155815.589820.jpg (40.76 KiB) Viewed 8835 times
- 458155842.838019.jpg (19.9 KiB) Viewed 8835 times
http://fontmeme.com/ibm-font/
What about personalisation?
- 458155913.810844.jpg (11.48 KiB) Viewed 8835 times
Much better than a serial number.
Posted: 09 Jul 2015, 21:24
by Redmaus
No more like an insert portion. So we could insert authentic IBM square badges in it or make DT square badges.
Posted: 09 Jul 2015, 23:03
by photekq
Redmaus wrote: ↑No more like an insert portion. So we could insert authentic IBM square badges in it or make DT square badges.
Yeah but what if we don't have any IBM badges and we don't particularly want a DT logo on our keyboard (nothing against DT or its logo, of course
)?
I say keep it as clean, simple, and faithful to the original as possible : NO LOGOS OR HOLES!
Posted: 09 Jul 2015, 23:07
by Muirium
Okay, I'll trade you no logo for NO CABLE!
Posted: 09 Jul 2015, 23:08
by photekq
Muirium wrote: ↑Okay, I'll trade you no logo for NO CABLE!
No batteries too?
Posted: 09 Jul 2015, 23:08
by Khers
I'm with photekq on this; the original 4704s did not have a logo, why clutter it up with one?
Posted: 09 Jul 2015, 23:12
by Muirium
Because the SSK is prettier!
Why not stick with the 4704's ugly and useless parallel cable while we're at it? The Kishy's a fine enough design, but it has multiple flaws.
Posted: 09 Jul 2015, 23:15
by Khers
Not having a logo is not one of them...
Posted: 09 Jul 2015, 23:21
by Redmaus
Khers wrote: ↑Not having a logo is not one of them...
Looks like no one wants a logo. I can live with that.
Some type of feet would be nice though...
Posted: 09 Jul 2015, 23:27
by photekq
I would go for a badge IF we had a solid source for original (or absolutely identical to original) square IBM badges. I wouldn't settle for anything less. If we could source those I think it would look lovely!
Otherwise, no badge for me thanks.
Posted: 09 Jul 2015, 23:36
by HAL
Muirium wrote: ↑I'm sure HAL himself would like it!
Definitely
Posted: 09 Jul 2015, 23:45
by Redmaus
photekq wrote: ↑I would go for a badge IF we had a solid source for original (or absolutely identical to original) square IBM badges. I wouldn't settle for anything less. If we could source those I think it would look lovely!
Otherwise, no badge for me thanks.
Yeah same here.
Posted: 09 Jul 2015, 23:57
by Ellipse
Red - I expect to include 1" cork feet. Like these:
http://www.mcmaster.com/#8771k73/=xzd7l2
Not sure if the rendering on their web site is accurate - it's probably a placeholder. They should look like the cork feet on the XT keyboard.
Posted: 10 Jul 2015, 00:00
by Redmaus
Ellipse wrote: ↑Red - I expect to include 1" cork feet. Like these:
http://www.mcmaster.com/#8771k73/=xzd7l2
Not sure if the rendering on their web site is accurate - it's probably a placeholder. They should look like the cork feet on the XT keyboard.
Eh I am not sure if cork feet are the best idea. I understand that the awesome double step feet on an F122 would most likely be too costly and complicated but maybe we could have screw-in metal feet like on the F107?
Posted: 10 Jul 2015, 01:39
by Muirium
Yeah, I'm no fan of the cork either. The Kishsaver's feet are okay, if not great. Retractable Model F style feet are the gold standard (better than the Model M) but obviously require a lot of design work.
