deskthority

If anyone needs stuff from Tipro, say it here I'm gonna need part numbers and quantities.

Anyone willing to do distribution for Germany?

Does this include whole boards?

I'm trying to understand what products they are offering on their website, but don't understand anything.

So many links, so many unanswered questions when reading the pages.

Would be interested in full boards too.

Especially this :
http://www.tipro.si/index_products_free_tmkmx128a.html
And this :
http://www.tipro.si/index_products_free_tmkmx032a.html
With USB connection

-- edit --
Could be interested in blank keycaps as well.

As I already said in the PM, I'm interested in an USB controller, that and maybe an RS232 cable. But would be interested in what you could deliver as well.

zulios wrote:Would be interested in full boards too.

Especially this :
http://www.tipro.si/index_products_free_tmkmx128a.html
And this :
http://www.tipro.si/index_products_free_tmkmx032a.html
With USB connection

-- edit --
Could be interested in blank keycaps as well.

I'm like this guy.

Except I also found those links:

http://www.tipro.si/index_pos_frontmatrix.html
http://www.tipro.si/index_products_fcx_080.html
http://www.tipro.si/index_products_mid_ ... meric.html

I'll be accepting propositions until the end of the week. Then I'm gonna e-mail Tipro to get the prices and we'll go on from there.

Just had a closer look. What I want is:
1x TM-CSA
1x TM-MUK

But before ordering I would like to know the prices of these.

How much would one or two USB controllers cost?
MID-MU00B I think...

IIRC USB controlers were 26€

Please note that (at least for the MID range), according to Tipro USB controllers won't work with very old modules.
Check the serial number of the module, it should start with 2002 or later.

and

Tipro wrote:Latest version of ChangeMe works on 64 bit version of Windows 7. However only USB drivers are WHQL certified, so programming PS/2 keyboard can not be done on 64 bit windows.

2 Tipro Mid joiners
1 MID-MU00B USB-Controller
----------------------------------------------------
1 Mid-**128A-**-001 housing (graphite color) , if they don't have one then I would like to have at least one black case.

Is it usually very expensive to order from Tipro?

kbdfr wrote:

Tipro wrote:Latest version of ChangeMe works on 64 bit version of Windows 7. However only USB drivers are WHQL certified, so programming PS/2 keyboard can not be done on 64 bit windows.

Hey ; doesn't this mean that if you use DSEO (driver signature enforcement overrider) it just might be possible to program all those PS/2 MID Tipros with the latest ChangeMe through Win7x64?
Or is it that not all Tipros even support the latest ChangeMe (or vice versa)?

I'm interested in a quote for a TM-KMX-032A in black (colour code C15) (http://www.tipro.si/index_products_free_tmkmx032a.html)

Hey Minsk, now you're here anyway, would you mind checking out if my idea posted right above you has any validity?
(and if you feel so inclined, the other questions posted here could use an answer as well)

Off! I'll look into it during the day. I have to go to a party now. Not a keyboard party haha :/

Awesome! T.I.A.
and enjoy that partey (and don't forget this thread )

If I remember it correct, then I have disabled the driver signature requirement on my Windows 7, and ChangeMe didn't work for PS/2 anyway.

apart from just disabling the driver signature enforcement, you'd also have to 'sign' the appropriate driver file

Do you know the name and location of the driver file?

I found a usb driver .sys in the installation directory for Cangeme.. so my guess is that ps2 programming simply isn't supported on 64 bit systems..

1 MID-MU00B USB-Controller
touchpad (full size) if under 30 Euro
If possible (and affordable) a black (C15) housing for my MID128 keyboard.
Willing to do distribution for the Netherlands.

Minskleip wrote:Do you know the name and location of the driver file?
I found a usb driver .sys in the installation directory for Cangeme.. so my guess is that ps2 programming simply isn't supported on 64 bit systems..

Oh your guess is spot on, it isn't 'supported' at all; doesn't mean it's not 'possible' though!
My guess is the file WKbdPort.dll is the one relating to PS/2.. sadly they're not very descriptive in the file descriptions nor in the help file (regarding driver(s)/files).

Might be interesting to some of you:
TIPRO-POS-Kassentastatur-PS-2-Tastatur-MID-AM-KM096K-29464 (8x8 Matrix layout)

7bit wrote:Might be interesting to some of you:
TIPRO-POS-Kassentastatur-PS-2-Tastatur-MID-AM-KM096K-29464 (8x8 Matrix layout)

It's not a 8x8, it's a 12x8 matrix layout.
Obviously ("kein weiteres Zubehör") no keys for the keylock.

If somedy is interested in one of them used instead of new and of course much cheaper, I can help.
Same configuration (AWEK branded, 12x8 matrix + card reader + keylock),
but with 2 springless switches (6G and 5H) under a 2x2 keycap. Different keys available for the keylock.

Any status for this?

Ah yes, good idea.. need to compile orders and send an inquiry.

bump

Been busy. I'll try to sort this out this week

OK I have compiled a short list of parts and sent it over to Tipro:
1 TM-CSA
1 TM-MUK

2 MID-MU00B
2 Tipro MID joiners
1 MID-MU00B USB-Controller
1 Mid-**128A-**-001 housing (graphite color)

TM-KMX-032A in black (colour code C15)

Full-size touchpad
1 MID-KM128 housing C15

To the guys asking about keyboards - please reply here and use proper ordering codes that can be found on Tipro website.

Cheers