HyperMicro / Deadline: 2015-03-17 / -32767 days to go! :o

User avatar
7bit

04 Jan 2015, 22:04

Prototype version 0.1
Image
Image
Image

I will order a 2nd prototype series.
:ugeek:

You can also preorder controllers and diodes:

Code: Select all

Order-ID      | Price |  Pcs|Description
HYPER/MICRO/P1| 20 EUR|    1|Prototype PCB (5x12)
TEENSY20      | 22 EUR|    1|Teensy 2.0 controller <--- you need this for the HyperMicro!
TEENSY31      | 28 EUR|    1|Teensy 3.1 controller
TEENSYPP      | 32 EUR|    1|Teensy++ 2.0 controller

Code: Select all

Order-ID      | Price |  Pcs|Description
DIODE10       |  1 EUR|   10|1N4148 diodes (10)
DIODE100      |  3 EUR|  100|1N4148 diodes (100) <--- you need about these many for 2 HyperMicro-s!
DIODE150      |  4 EUR|  150|1N4148 diodes (150)
DIODE500      |  8 EUR|  500|1N4148 diodes (500)
DIODE1K       | 12 EUR| 1000|1N4148 diodes (1k)
DIODE2K       | 23 EUR| 2000|1N4148 diodes (2k)
DIODE5K       | 55 EUR| 5000|1N4148 diodes (5k)
DIODE10K      |105 EUR|10000|1N4148 diodes (10k)

Code: Select all

Order-ID      | Price |  Pcs|Description
STAB200       |  2 EUR|    1|Cherry plate mount stab 2-2.75u
STAB203       |  5 EUR|    3|Cherry plate mount stab ISO-TKL
STAB204       |  6 EUR|    4|Cherry plate mount stab ANSI-TKL
STAB206       |  8 EUR|    6|Cherry plate mount stab ISO-102
STAB207       |  9 EUR|    7|Cherry plate mount stab ANSI-101
STAB400       |  2 EUR|    1|Cherry plate mount stab 4u
STAB625       |  2 EUR|    1|Cherry plate mount stab 6.25u
STAB700       |  2 EUR|    1|Cherry plate mount stab 7u

Code: Select all

Order-ID             |Price |Description
HYPER/MICRO/7BIT     |10 EUR|normal_plate
HYPER/MICRO/ANSI100  |10 EUR|normal_plate
HYPER/MICRO/ANSI400  |10 EUR|normal_plate
HYPER/MICRO/ANSI400M |10 EUR|normal_plate
HYPER/MICRO/ANSI625  |10 EUR|normal_plate
HYPER/MICRO/ANSI700  |10 EUR|normal_plate
HYPER/MICRO/SYM100   |10 EUR|normal_plate
HYPER/MICRO/SYM400   |10 EUR|normal_plate
HYPER/MICRO/SYM700   |10 EUR|normal_plate
HYPER/MICRO/7BITH    |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/ANSI100H |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/ANSI400H |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/ANSI400MH|10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/ANSI625H |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/ANSI700H |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/SYM100H  |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/SYM400H  |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/SYM700H  |10 EUR|plate_with_trackpoint-hole

:o

All Hyper keyboards for CherryMX switches have the mount holes for PCB-mount switches!
:o


Submitting an order works the usual way,
by pm-ing user CherryMX

HYPER/MICRO/P1
HYPER/MICRO/ANSI700H
STAB700
TEENSY20
MXCLEAR/NW 45
MXGREY/NW
DIODE100
ypur e-mail address
ADDRESS
your shipping address
with name
street,
town and
country


:roll:


Shipping is 4 EUR, no matter how many PCBs, switches, or key caps you order!
:cool:

User avatar
quochung1989
Vintage Cherry Collector

06 Jan 2015, 02:33

Where do I study more about Hypermicro?

User avatar
7bit

06 Jan 2015, 09:10


User avatar
quochung1989
Vintage Cherry Collector

06 Jan 2015, 13:30


User avatar
scottc

06 Jan 2015, 18:56

7bit, how many version 0.1 prototypes are left? What has changed in the 0.2 prototype?

User avatar
7bit

06 Jan 2015, 19:49

0.1 is the one I will order, 0.2 will never exist because I'm fully confident that everything will be OK in version 0.1!
:ugeek:

The differences are:
- corrected switch logic for the mouse-buttons (was alsways closed, unless pressed)
- corrected holes for case (or backplate) mounting (0.0 works OK for most layouts,
- except for those with traditional staggering)
- cosmetic changes (those green fields don't look well in version 0.0)
:o

User avatar
scottc

06 Jan 2015, 19:59

Ah, I thought that the current prototypes were 0.1 already! Great. Will you offer the other parts (mouse buttons, etc) too?

How about the trackpoint? Can I use my own, like one from the IBM Space Saver rubber dome boards?

Image

teuf

06 Jan 2015, 19:59

Do you have a rough estimate for the teensy/diode availability?

User avatar
7bit

06 Jan 2015, 20:14

The trackpoint must fit through the hole, which is a bit less than 7mm in diameter.

I still don't have a cheap source for the buttons.

I will order controllers and other stuff in 2-3 weeks, depending on how many orders I get for the PCBs etc.

User avatar
scottc

06 Jan 2015, 20:18

Interesting. Thanks for the info.

User avatar
7bit

06 Jan 2015, 20:49

Did you measure the trackpoint yet?
:?

I have 5.334mm if a mount plate is used and 7.112mm with only the PCB. If I make the hole wider, the G and H switches will lose stability.

User avatar
7bit

09 Jan 2015, 18:08

I've made it wider!
:o

Now, you all can send in your orders.
:evilgeek:

User avatar
scottc

09 Jan 2015, 18:15

I will get on that tonight. :maverick:

User avatar
Halvar

09 Jan 2015, 18:57

On my PCB it says "Prototype - Version 0.0 - 2014-08-27" as on the photo above. This still means it's a v0.1 board, right?

User avatar
7bit

09 Jan 2015, 18:59

Yes.

I don't have a photo of the version 0.1 yet.
:roll:

User avatar
scottc

10 Jan 2015, 13:13

scottc wrote: I will get on that tonight. :maverick:
I couldn't find my loose trackpoint last night, so today I will look for my second IBM Space Saver and try to remove the trackpoint from that one.

User avatar
7bit

10 Jan 2015, 13:29

You don't need to!

I already know the dimension!
:-)

User avatar
scottc

10 Jan 2015, 14:24

Oh, great! Will it fit? :)

User avatar
7bit

10 Jan 2015, 14:44

The edges of the trackpoint are at most 4mm and the diameter is less than 4*sqrt(2)==5.65685424949238019520mm
The diamenter of the hole in the plate is 6mm.
I've tried with my thinkpad and found out that the trackpoint is not really moving, so this should be fine.

User avatar
scottc

10 Jan 2015, 15:04

Excellent. That's good info. Can't wait to try it.

User avatar
7bit

11 Jan 2015, 14:07

Plates are now available:

Code: Select all

HYPER/MICRO/7BIT      |normal plate
HYPER/MICRO/7BITH     |plate with trackpoint-hole
HYPER/MICRO/ANSI100   |normal plate
HYPER/MICRO/ANSI100H  |plate with trackpoint-hole
HYPER/MICRO/ANSI400   |normal plate
HYPER/MICRO/ANSI400H  |plate with trackpoint-hole
HYPER/MICRO/ANSI400M  |normal plate
HYPER/MICRO/ANSI400MH |plate with trackpoint-hole
HYPER/MICRO/ANSI625   |normal plate
HYPER/MICRO/ANSI625H  |plate with trackpoint-hole
HYPER/MICRO/ANSI700   |normal plate
HYPER/MICRO/ANSI700H  |plate with trackpoint-hole
HYPER/MICRO/SYM100    |normal plate
HYPER/MICRO/SYM100H   |plate with trackpoint-hole
HYPER/MICRO/SYM400    |normal plate
HYPER/MICRO/SYM400H   |plate with trackpoint-hole
HYPER/MICRO/SYM700    |normal plate
HYPER/MICRO/SYM700H   |plate with trackpoint-hole
:cry:

Price: 10 EUR each.
HyperMicro_7BIT_layout.png
HyperMicro_7BIT_layout.png (12.26 KiB) Viewed 12117 times
HyperMicro_SYM100_layout.png
HyperMicro_SYM100_layout.png (12.57 KiB) Viewed 12117 times
HyperMicro_SYM400_layout.png
HyperMicro_SYM400_layout.png (12.51 KiB) Viewed 12117 times
HyperMicro_SYM700_layout.png
HyperMicro_SYM700_layout.png (12.41 KiB) Viewed 12117 times
HyperMicro_ANSI100_layout.png
HyperMicro_ANSI100_layout.png (12.96 KiB) Viewed 12117 times
HyperMicro_ANSI400_layout.png
HyperMicro_ANSI400_layout.png (12.86 KiB) Viewed 12117 times
HyperMicro_ANSI400M_layout.png
HyperMicro_ANSI400M_layout.png (12.97 KiB) Viewed 12117 times
HyperMicro_ANSI625_layout.png
HyperMicro_ANSI625_layout.png (12.91 KiB) Viewed 12117 times
HyperMicro_ANSI700_layout.png
HyperMicro_ANSI700_layout.png (12.72 KiB) Viewed 12117 times
:roll:

User avatar
matt3o
-[°_°]-

11 Jan 2015, 14:17

10 each?! what material?

User avatar
7bit

11 Jan 2015, 14:30

Aluminium?
:?
HyperMicro_7BIT_H.png
HyperMicro_7BIT_H.png (53.6 KiB) Viewed 12126 times
HYPER/MICRO/7BITH
HYPER/MICRO/7BIT
HyperMicro_SYM100_H.png
HyperMicro_SYM100_H.png (57.81 KiB) Viewed 12126 times
HYPER/MICRO/SYM100H
HYPER/MICRO/SYM100
HyperMicro_SYM400_H.png
HyperMicro_SYM400_H.png (57.67 KiB) Viewed 12126 times
HYPER/MICRO/SYM400H
HYPER/MICRO/SYM400
HyperMicro_SYM700_H.png
HyperMicro_SYM700_H.png (55.5 KiB) Viewed 12126 times
HYPER/MICRO/SYM700H
HYPER/MICRO/SYM700
HyperMicro_ANSI100_H.png
HyperMicro_ANSI100_H.png (56.64 KiB) Viewed 12126 times
HYPER/MICRO/ANSI100H
HYPER/MICRO/ANSI100
HyperMicro_ANSI400_H.png
HyperMicro_ANSI400_H.png (56.49 KiB) Viewed 12126 times
HYPER/MICRO/ANSI400MH
HYPER/MICRO/ANSI400M
HyperMicro_ANSI400M_H.png
HyperMicro_ANSI400M_H.png (56.6 KiB) Viewed 12126 times
HYPER/MICRO/ANSI400MH
HYPER/MICRO/ANSI400M
HyperMicro_ANSI625_H.png
HyperMicro_ANSI625_H.png (55.53 KiB) Viewed 12126 times
HYPER/MICRO/ANSI625H
HYPER/MICRO/ANSI625
HyperMicro_ANSI700_H.png
HyperMicro_ANSI700_H.png (54.32 KiB) Viewed 12126 times
HYPER/MICRO/ANSI700H
HYPER/MICRO/ANSI700

User avatar
matt3o
-[°_°]-

11 Jan 2015, 15:27

wow pretty cheap, maybe because they are super small. where do you get them at the end?

User avatar
scottc

11 Jan 2015, 15:35

Can you provide images for the different layout types that correspond to the plates? I'm going to have to arrange another bank transfer :o

User avatar
7bit

11 Jan 2015, 17:10

Test:
Spoiler:
HyperMicro_ANSI700_H.png
HyperMicro_ANSI700_H.png (13.49 KiB) Viewed 12147 times
HyperMicro_ANSI700.png
HyperMicro_ANSI700.png (53.42 KiB) Viewed 12131 times
:roll:
Which looks better:
With or without black framelines?
:?

User avatar
scottc

11 Jan 2015, 17:18

With them, definitely.

User avatar
scottc

12 Jan 2015, 23:28

What is the ETA for HYPER/MICRO/P1? :shock:

User avatar
7bit

13 Jan 2015, 00:04

I've currently got only 2 orders, so I guess it will take a little bit more time ...
:-(

User avatar
scottc

13 Jan 2015, 00:15

:( Are there any first-gen prototypes left for me to take instead?

Post Reply

Return to “Group buys”