TG3 KBA-BL82 & KBA-nBLT

zts

15 Jun 2015, 00:07

tg3_3.jpeg
tg3_3.jpeg (515.13 KiB) Viewed 5555 times
Two variants of TG3 compact rugged keyboard usually used in kiosks, by emergency & police services, and basically anywhere you could expect liquid spills or rough/abusive handling. The only difference between the two is the touchpad. Backlit and non-backlit versions -- the non-backlit version displays an "n" in the model name, as in KBA-nBLT. More standard consumer-oriented KBs are made via Deck (TG3 is the parent company) that are still extraordinarily tough and well made -- so, Deck 82 is essentially same as TG3 KBA-BL82. See Deck 82: http://deskthority.net/wiki/Deck_82#Discontinued_models

These KBs are very affordable (cheap) and many use them to harvest switches and keycaps. Often mistaken for somewhat unattractive rubber domes (by pressing a key over well-protected switch), the demand is pretty low, so there is significant surplus of brand new TG3s.

Front and (rudimentary) back:
tg3_1.jpeg
tg3_1.jpeg (400.06 KiB) Viewed 5555 times
tg3_2.jpeg
tg3_2.jpeg (306.06 KiB) Viewed 5555 times
Once the keycaps are removed, the rubberized protection is visible (it also dampens sound and it's harder to actuate):
tg3_4.jpeg
tg3_4.jpeg (541.45 KiB) Viewed 5555 times
tg3_5.jpeg
tg3_5.jpeg (409.69 KiB) Viewed 5555 times
Lifting the protective layer reveals Cherry MX black switches:
tg3_6.jpeg
tg3_6.jpeg (375.31 KiB) Viewed 5555 times
tg3_7.jpeg
tg3_7.jpeg (816.5 KiB) Viewed 5555 times
The non-touchpad backlit version (TG3 KBA-BL82) has a different type of protective layer -- it pretty much feels like typical Saran wrap and keycaps are just pressed over it:
tg3_8.jpeg
tg3_8.jpeg (603.48 KiB) Viewed 5555 times
tg3_9.jpeg
tg3_9.jpeg (564.49 KiB) Viewed 5555 times
Removing the protective layer from TG3 KBA-BL82, again reveals Cherry MX black switches with LEDs (notice Cherry MX grey under the spacebar ... and nowadays rarely seen "Made in USA" on the board below):
tg3_10.jpeg
tg3_10.jpeg (693.35 KiB) Viewed 5555 times
tg3_12.jpeg
tg3_12.jpeg (242.01 KiB) Viewed 5555 times
tg3_13.jpeg
tg3_13.jpeg (153.86 KiB) Viewed 5555 times
Backlight at approx. half strength in moderately lit room (no flash):
tg3_15.jpeg
tg3_15.jpeg (143.17 KiB) Viewed 5555 times
Anyways, these are immensely sturdy compacts and protected to the extent that it's hard to feel their mechanical nature. Remove the protective layer to get a typical Cherrry MX black feel and performance. Obsessed with esthetics -- you'll skip these KBs or just harvest the switches and keycaps (if you plan to harvest, IMO, the non-backlit versions have somewhat nicer keycaps).

Note: the box/packaging in the top pic contains only one KB variant of the two pictured models on the box. It's not unusual that these KBs are packaged in brownish plain boxes (no lettering or pics at all on them).

Note 2: created wiki page: http://deskthority.net/wiki/TG3_KBA-BL82/BLT
Last edited by zts on 26 Jun 2015, 00:52, edited 3 times in total.

User avatar
scottc

15 Jun 2015, 00:21

These are some very handsome keyboards! I might have to pick one up. What are the keycaps like? And how much did you pay?

User avatar
Redmaus
Gotta start somewhere

15 Jun 2015, 00:25

mmmm

Need close up on those keys.

User avatar
Ascaii
The Beard

15 Jun 2015, 00:26

ive got one of these with a busted led i tried selling for months, no one was interested. If you want a cheap one, ive got one xD In the states, they will cost about 30-40 bucks shipped, but getting one to europe is a hassle due to import charges.

User avatar
scottc

15 Jun 2015, 00:29

I don't know Ascaii, I actually kind of like the backlight on this guy! The touchpad is awesome too.

zts

15 Jun 2015, 00:35

scottc wrote: These are some very handsome keyboards! I might have to pick one up. What are the keycaps like? And how much did you pay?
Brand new in box are around $28.94 for non-backlit with touchpad (USB); and $39.99 for backlit without touchpad (PS/2). Doubleshots. The non-backlit caps feel better and look somewhat nicer (for harvesting purposes). There used to be the white version of these KBs, but are now somewhat hard to find.

User avatar
scottc

15 Jun 2015, 00:42

Are they ABS? PBT? I remember reading about some early PBT doubleshot Deck keycaps but might be mistaken. You should update the wiki also: http://deskthority.net/wiki/Deck_82 :)

User avatar
Ascaii
The Beard

15 Jun 2015, 00:51

nah, just a single bum led that used to work when i got the keyboard, im sure it can be fixed. The rest works perfectly.

User avatar
scottc

15 Jun 2015, 01:13

Ah, cool. Might stick it on "the list" for coming back to later!

zts

15 Jun 2015, 01:34

scottc wrote: Are they ABS? PBT? I remember reading about some early PBT doubleshot Deck keycaps but might be mistaken. You should update the wiki also: http://deskthority.net/wiki/Deck_82 :)
Yes, many Decks come with PBT+POM keycaps -- great quality, BTW, and most of Deck KBs beat very well built KULs in terms of sturdiness. The only questionable thing about Deck is the non-mainstream font/lettering on them.

This one with no touchpad, but backlit, very nice quality but looks more like a doubleshot ABS to me with some rough-the-top-surface coat (to prevent slips):
tg3_cap1.jpeg
tg3_cap1.jpeg (332.28 KiB) Viewed 5477 times
The other with touchpad, could be a doubleshot PBT (need to find those pics). I think one of the best bets to get PBT is to look to the non-USB (older PS/2) versions.

zts

15 Jun 2015, 02:26

Redmaus wrote: mmmm

Need close up on those keys.
Here they are ...


Non-backlit:
tg3_a.jpeg
tg3_a.jpeg (149.59 KiB) Viewed 5461 times
tg3_b.jpeg
tg3_b.jpeg (161.45 KiB) Viewed 5461 times
Backlit:
tg3_c.jpeg
tg3_c.jpeg (143.21 KiB) Viewed 5461 times
tg3_d.jpeg
tg3_d.jpeg (158.16 KiB) Viewed 5461 times

RoostrC0gburn

22 Aug 2015, 22:48

Anybody know what size the spacebar is?

Aleksander

25 Aug 2015, 21:14

I have one of these boards, backlit with trackpad, AND the dock AND itronix tablet-computer that they used in the police cars :) (but the tablet is SUPER-outdated)

Post Reply

Return to “Gallery”