Page 2 of 2

Posted: 13 Jun 2012, 21:38
by ripster
Leech the images and upload here.

Life is short. Storage is cheap.

Posted: 13 Jun 2012, 23:00
by Limmy
Edel wrote:
off wrote:
Edel wrote:Man I read a really good article on kbdmania I think (can't find the url yet)
How about now?
Can't find it... but will post it here!
Here are the links of the mod (I think this is what you mean..)

http://www.kbdmania.net/xe/3354636 by KIN25 (original idea)
http://www.kbdmania.net/xe/3471366 by Leos (some modification; has video comparison)

If I remember correctly, the mod only works for non-blue switch.
http://www.kbdmania.net/xe/122510 by Scarface (describes source of clacking sound in Cherry MX switches)

Possible downsides of this mod are
1. the silicon pad(1mm thick, used in 1st post) or silicon ring(used in 2nd post) is hard to obtain if you don't know where and what to look for
2. It is pretty time consuming if a board is plate mounted because you have to desolder in order to open up the switches.
3. you need fine motor skill.