[GB] Programmable Vintage board PCBs - Omnikey, AT101, and Z-150

Welcome!
I recently ran a GB for the Omnikey PCB I designed and after a few modifications to fix compatibility with older variants of the omnikey, I am back with round 2.

Along with the Omnikey board I will have the AT101/AT101W/SGI board and a Zenith Z-150 board for sale as well. Details below

PCB Renders:
- Omnikey PCB
Omnikey.png


- AT101 PCB
AT101_PCB_Top.png


- Z-150 PCB
Z-150_PCB_Top.PNG


Sorry for the bad renders, I don't have any better way to render PCBs at the moment.

Product Info:
The boards will be matte black with ENIG(Gold) pads, with silkscreen in white. Omnikey has a logo, AT101 may have a small logo, Z-150 may have a small logo, will be determined before manu order.

- The Omnikey board Supports:
    Ultra
    Ultra T
    101
    102
    Plus
    As well as all other derivatives/variants

-The AT101 PCB supports:
    AT101
    AT101W
    SGI variants

-The Z-150 supports just itself as I don't know of any other board that would work at the current time.

What is Needed:
    Teensy++ or Teensy2.0the AT101 PCB
    Indicator LEDs
    Resistors for LEDs
    Switches
    Diodes, if not bought along with PCB

Omnikey Layouts:
Supported layouts include all original layouts for the omnikeys, and include the option for ANSI or ISO support for enter and shift keys. As well there is the option for the below layouts, matching colors can be swapped and red keys will have to be given up to do so.
Omnikey_Layouts.png


You can cut of the extra function columns on the left hand side, using either a razor saw and cutting down the middle of the plated holes where the silkscreen line is. Or you can score down that line, on both sides, with a sharp blade and snap it off to support boards without the extra function keys.

AT101 Layouts:
Supported layouts include all original layouts for the AT101s, and include the option for ISO support for enter and shift keys. As well there is the option for the below layouts, matching colors can be swapped and red keys will have to be given up to do so. Options include both style stepped caps lock, 1.5U and 1.25U, to allow support of Tai-Hao alps cap sets and cherry style sets.
AT101_Layout.png


Z-150 Layouts:
Supported layouts include the original layout, along with an AT/XT and TKL hybrid layout.
Z-150_Layout.png



Pricing:
Note: Prices do not include final shipping or Paypal fees.

PCBs:
    Omnikey:
      10 - $66
      15 - $53
      20 - $46
      30 - $36
      40+ - $33
    AT101:
      10 - $65
      15 - $51
      20 - $45
      30 - $35
      40+ - $31
    Z-150:
      5 - $85
      10 - $56
      15 - $43
      20 - $39
      30 - $30
      40+ - $27

Diodes:
    140 - $6
    110 - $5

Tai-Hao Spacebar stab adapters:
    1 set - $5(estimate as quantity lowers price)

Shipping:
    US - $15
    International - $15 to $20

Schedule:
This GB will open on 7/2 at 5pm central time and close on 7/23 at midnight central time.

Invoices will be sent out once I receive your order and are due on receipt. Once the GB closes I will refund the extra amount paid for any price drops hit. Failure to pay by 7/27 at midnight central time, will black list you from future GBs. I don't want to have the same issues I had with the Nexus slider GB, so this is how it will be done.


Production will take 2-3 weeks to arrive at my door. From there I will ship them out within 1 to 2 weeks depending on how many PCBs are ordered.


Order Link:
Link: https://goo.gl/forms/Ayiuc56LBBcvK2sS2

Note: If you were part of the first round and you experienced issues with fitment, please PM me prior to placing your order to confirm a discount on your order of a round 2 omnikey PCB.

Note: If you wish to order a Round 1 omnikey PCB that is guaranteed to fit the Ultra T, 101 with the badge door, and Avant variants. I have a few available for sale for $34 each. Pm if interested.

Live Order Count:
Last edited by BlindAssassin111 on 13 Jul 2018, 19:50, edited 2 times in total.
BlindAssassin111

Unread post29 Jun 2018, 23:15

X
BlindAssassin111
 
Posts: 162
Joined: 25 Mar 2013, 01:03
Location: Houston
Main keyboard: TKL with BOX Jades
Main mouse: gskill ripjaws MX780
Favorite switch: Brown Alps and BOX Jades
DT Pro Member: -
 
Thanks for doing this! GLWGB!

While I'm not gonna order this, if you ever decide to make an alps compatible PCB that fits current custom TKLs I'd order like 5 of those.
foxmancore

Unread post30 Jun 2018, 07:11

X
foxmancore
 
Posts: 3
Joined: 24 Apr 2018, 12:19
Location: Tokyo
DT Pro Member: -
 
Update:

Just wanted to note that the Z-150 board has been changed a bit, I moved the Teensy++ a bit and added notches on the top edge of the board similar to the original, I was waiting for measurements before I made that change, and I will update pictures when it is fully finished. This will not affect cost.
BlindAssassin111

Unread post02 Jul 2018, 21:39

X
BlindAssassin111
 
Posts: 162
Joined: 25 Mar 2013, 01:03
Location: Houston
Main keyboard: TKL with BOX Jades
Main mouse: gskill ripjaws MX780
Favorite switch: Brown Alps and BOX Jades
DT Pro Member: -
 
GB is now live!!!
BlindAssassin111

Unread post02 Jul 2018, 23:00

X
BlindAssassin111
 
Posts: 162
Joined: 25 Mar 2013, 01:03
Location: Houston
Main keyboard: TKL with BOX Jades
Main mouse: gskill ripjaws MX780
Favorite switch: Brown Alps and BOX Jades
DT Pro Member: -
 
BlindAssassin111 wrote:Update:

Just wanted to note that the Z-150 board has been changed a bit, I moved the Teensy++ a bit and added notches on the top edge of the board similar to the original, I was waiting for measurements before I made that change, and I will update pictures when it is fully finished. This will not affect cost.


DId you put them cable tie holes in ? They are super handy for securing the cable .
andrewjoy

Unread post03 Jul 2018, 09:50

X
andrewjoy
 
Posts: 4996
Joined: 11 Apr 2012, 16:27
Location: UK
Main keyboard: Filco ZERO green alps, Model F 122 Terminal
Main mouse: Ducky Secret / Roller Mouse Pro 1
Favorite switch: MX Mount Topre / Model F Buckling
DT Pro Member: 0167
 
andrewjoy wrote:
BlindAssassin111 wrote:Update:

Just wanted to note that the Z-150 board has been changed a bit, I moved the Teensy++ a bit and added notches on the top edge of the board similar to the original, I was waiting for measurements before I made that change, and I will update pictures when it is fully finished. This will not affect cost.


DId you put them cable tie holes in ? They are super handy for securing the cable .

The board has cable tie holes? I did not know this...It would be hard to integrate them in as I Have the notch all the way to the edge of the teensy to allow as much fitment room as possible.
BlindAssassin111

Unread post06 Jul 2018, 00:56

X
BlindAssassin111
 
Posts: 162
Joined: 25 Mar 2013, 01:03
Location: Houston
Main keyboard: TKL with BOX Jades
Main mouse: gskill ripjaws MX780
Favorite switch: Brown Alps and BOX Jades
DT Pro Member: -
 
Update:
Z-150 hit MOQ!!!

Current:
Omnikey - 1 Sad that this is still so low :(
AT101 - 6 Getting closer to MOQ
Z-150 - 6 Getting close to the first price drop!!
BlindAssassin111

Unread post07 Jul 2018, 20:03

X
BlindAssassin111
 
Posts: 162
Joined: 25 Mar 2013, 01:03
Location: Houston
Main keyboard: TKL with BOX Jades
Main mouse: gskill ripjaws MX780
Favorite switch: Brown Alps and BOX Jades
DT Pro Member: -
 
Would you consider doing a ZKB-2 / 163-73 PCB? An ANSI zenith board would be pretty neat =)
//gainsborough
User avatar
ALPSの日常

Unread post08 Jul 2018, 23:49

User avatar
X
//gainsborough
ALPSの日常
 
Posts: 806
Joined: 31 May 2016, 07:26
Location: Oregon
Main keyboard: some kind of alps keyboard
Favorite switch: clk: SKCM blue, lin: SKCL cream, tac: SKCM cream
DT Pro Member: 0188
 
//gainsborough wrote:Would you consider doing a ZKB-2 / 163-73 PCB? An ANSI zenith board would be pretty neat =)

I am open for that, just need more info on the board, I don't have the funds to buy boards to measure at this point. I would love to collect all of the boards I have PCBs for but sadly can't. :(
BlindAssassin111

Unread post09 Jul 2018, 03:04

X
BlindAssassin111
 
Posts: 162
Joined: 25 Mar 2013, 01:03
Location: Houston
Main keyboard: TKL with BOX Jades
Main mouse: gskill ripjaws MX780
Favorite switch: Brown Alps and BOX Jades
DT Pro Member: -
 
I can measure mine , once the clusterfuck that is the corrosion is fixed.

Or i could loan you the PCB, again once the corrosion is fixed.
andrewjoy

Unread post09 Jul 2018, 10:32

X
andrewjoy
 
Posts: 4996
Joined: 11 Apr 2012, 16:27
Location: UK
Main keyboard: Filco ZERO green alps, Model F 122 Terminal
Main mouse: Ducky Secret / Roller Mouse Pro 1
Favorite switch: MX Mount Topre / Model F Buckling
DT Pro Member: 0167
 
Update:
Just under a week left and still under MOQ for the Omnikey and AT101, Hopefully more orders come in soon so they can be run! Spread the word around to try and help!
BlindAssassin111

Unread post10 Jul 2018, 23:36

X
BlindAssassin111
 
Posts: 162
Joined: 25 Mar 2013, 01:03
Location: Houston
Main keyboard: TKL with BOX Jades
Main mouse: gskill ripjaws MX780
Favorite switch: Brown Alps and BOX Jades
DT Pro Member: -
 
Update:

I extended the GB until the 23rd as we are not at the MOQ for the Omnikey or AT101 PCBs. If you know someone who has one of these that may be interested, please let them know, we are so close and it would suck for this to not reach MOQ.
BlindAssassin111

Unread post13 Jul 2018, 19:57

X
BlindAssassin111
 
Posts: 162
Joined: 25 Mar 2013, 01:03
Location: Houston
Main keyboard: TKL with BOX Jades
Main mouse: gskill ripjaws MX780
Favorite switch: Brown Alps and BOX Jades
DT Pro Member: -
 
aah damn it not sure if I should get that Z-150 one, since I know I'll never be able to finish my handwiring project (lack of skill) on it :cry:. the horizontal matrix wires and the diodes are already soldered in.
green-squid
User avatar

Unread post13 Jul 2018, 20:26

User avatar
X
green-squid
 
Posts: 1076
Joined: 07 Oct 2017, 11:19
Location: Hungary
Main keyboard: Lexmark Dell Model M
Main mouse: Lenovo Scrollpoint optical
Favorite switch: Buckling Spring
DT Pro Member: -
 
Well. ACTUALLY, I think I could finish it, but I have no idea where to solder which matrix on the Teensy++..
green-squid
User avatar

Unread post13 Jul 2018, 20:46

User avatar
X
green-squid
 
Posts: 1076
Joined: 07 Oct 2017, 11:19
Location: Hungary
Main keyboard: Lexmark Dell Model M
Main mouse: Lenovo Scrollpoint optical
Favorite switch: Buckling Spring
DT Pro Member: -
 
Update:

1 week left!! Still under MOQ for the Omnikey and AT101 PCBs.
BlindAssassin111

Unread post17 Jul 2018, 01:55

X
BlindAssassin111
 
Posts: 162
Joined: 25 Mar 2013, 01:03
Location: Houston
Main keyboard: TKL with BOX Jades
Main mouse: gskill ripjaws MX780
Favorite switch: Brown Alps and BOX Jades
DT Pro Member: -
 
Would it be possible for you to design a replacement PCB for the G80-11900? (PS/2 version) I would pay for the design.
abrahamstechnology

Unread post17 Jul 2018, 15:36

X
abrahamstechnology
 
Posts: 18
Joined: 28 Jun 2018, 19:38
Location: United States
Main keyboard: Fujitsu FKB4725
Main mouse: Mitsumi ECM-S3902
Favorite switch: Buckling springs
DT Pro Member: -
 
Update:

Still low on orders.

The omnikey is now down to zero as that order was canceled.

The AT101 is at 7, and I may go ahead and push that to MOQ just because I want to get those who ordered boards but would rather have those purchased instead of sitting around.

The Z-150 is at 8 and before that order was canceled almost hit the first price drop, so unless we can get 2 more ordered by 7/23, the price will not drop.
BlindAssassin111

Unread postYesterday, 04:35

X
BlindAssassin111
 
Posts: 162
Joined: 25 Mar 2013, 01:03
Location: Houston
Main keyboard: TKL with BOX Jades
Main mouse: gskill ripjaws MX780
Favorite switch: Brown Alps and BOX Jades
DT Pro Member: -
 

Who is online

Users browsing this forum: gnarlsagan and 35 guests