deskthority

How much would you rate a G80-1000 HAD without keycaps with the rest of the board in medium condition?

I have tried Matias sliders in orange alps. The Matias sliders are smaller than Alps sliders which increases wobble. Have you noticed anything regarding this issue? Also iirc the little wings on the Matias leafs are shorter. Did you put paper or anything in there to have that fixed?

It seems they are indeed. Have measured the resistance of a few of them. The once not working properly got resistances into the mega ohms when pressed. I should have a look for NIB boards...

I have just recently come to aquire a few ALPS boards and made an observation: My alps orange switches from two different boards diverse heavily in actuation distance. Some do active when only lightly touched, some activate only on bottoming out and other do not active at all or just sporadically. I...

Thank you so much for this Tutorial! I've managed to use a Pro Micro as a controller for my handwired m0116! Two things I've noticed: 1. On MacOS you can install avrdude via homebrew: brew install avrdude 2. To go into bootloader mode you do not have to short while 'powering up' and the pro micro on...

Doesn't hurt to try that. The most effective way to give your sliders a good lubing is a method I learned from kin25. You put all the sliders in a ziploc bag, add a couple of drops a low viscosity lube (like Super Lube or silicone lube) and then inflate the bag, seal it and shake it really well unt...

I'm definitely in if this is happening!