deskthority

Bump!

Hello !

I'm looking for an FEXT PCB.

I'm based in France, so European sellers are preferred but I'm willing to pay for international shipping as well.

Thanks for stopping by!

darkcruix wrote: ↑

02 Jun 2021, 11:55

I checked my storage. Unfortunately I only have two Selectric Space Bars available, which won't fit.

Thank you I do have one of those too but like you said, they don't fit.

Hello !

I'm looking for an IBM 5251 Beamspring spacebar.

I'm based in France, so European sellers are preferred but I'm willing to pay for international shipping as well.

Thanks for stopping by!

ifohancroft wrote: ↑

31 May 2021, 00:45

Perfect! Thank you!

Sure thing, no problem.
Also, by reading portions of the code, I found some comments (1, 2, 3, ...) left by Arakula indicating that he might have altered some parts of the code.

Alright! I was able to test the firmware on two keyboards (a 102-key Model M and an M122). The firmware works like a charm. Awesome! Thanks for testing! Does it work functionally the same as Soarer's? The two keyboards I tested the firmware on behave exactly as they were running Soarer's firmware (...

Alright! I was able to test the firmware on two keyboards (a 102-key Model M and an M122).
The firmware works like a charm.

Urk. I don't actually know this is true. I assumed it based on what Antonizoon said. If he's not a reliable reporter we have a problem. Not an insuperable one, though. Code decompilation is an actual thing, we'd just need someone to do it more carefully. Perhaps it is true. We don't know (at least ...

Password protected copies of Arakula’s reverse engineering project, distributed against his will. “Rad.” If all we cared about was getting our grubby hands on the code, this conversation (ahem :roll:) wouldn’t exist. Stolen code is no good to anyone. Apparently, he was able to upload it to a reposi...

Well, I've just finished reading the whole 9 pages of this thread... WOW what a journey!
Just adding more information to this thread hoping that it could help: https://trello.com/c/49xeEOPm/15-arakul ... -converter

Hello !

I'm looking for 3x IBM Model F flippers.

I'm based in France, so European sellers are preferred but I'm willing to pay for international shipping as well.

Thanks for stopping by!

Update: After waiting several weeks for the parts to arrive and for myself to find some time to work on my C.ITOH keyboard, I was able to convert it using the details available across the post. Thanks to the work done by snacksthecat who decoded the matrix, I was able to write the QMK firmware usin...

Ellipse told me that he wasn’t able to match the colors by RAL or PANTONE. He is using a custom made one for the New Model F keyboards

Here's where I landed with the matrix. I added the N- key (Numpad Minus) as it was missing in the matrix definition: A B C D E F G H/I J K L M N 1 Left Pause NEnter N+ (led scroll) (led caps) (led num) (leds ???) (???) Home End Up 2 RAlt Scroll (led scroll) (led caps) (led num) (leds ???) (???) Pri...

Hello !

I'm looking for an IBM 5251 Beamspring keyboard.

I'm based in France, so European sellers are preferred but I'm willing to pay for international shipping as well.

Thanks for stopping by!

Very nice work!!! It's indeed one of the best 327X restoration videos I've seen so far.
Would you mind sharing the color you used to repaint the case if it's not a custom one ?

Thank you both for keeping DT up all this time !!!

Fifth bump!

BUMP!

Another desperate bump!

Fourth bump!

Checking of capacitors a possible only if complete remove it. Brocken switches can blocked work of electronic? Tonight i'm ordering five a pieces. Hello Kashtan, did you end up replacing the capacitors? I'd be interested in which ones exactly you bought. I also plan on replacing my controller's cap...

https://ibb.co/xzgwjQG This is where I'm at - "state" seems to indicate whenever I type anything. Is this where I would enter "Bootloader" mode under "tools"? I've downloaded QMK_Toolbox-master and am not sure where the .EXE file you've mention lives. https://ibb.co/mvNYHnx The QMK Toolbox is avail...

TNT wrote: ↑

12 Feb 2021, 19:46

How dare you belch in my face like that

Third bump!

B**p!

I had to check, I think it's Teensy 2.0. I bought it as an assembled board with the teensy soldered to the board. And I just realized that I need to remap Alt-Gr too. Thanks! https://i.ebayimg.com/images/g/TngAAOSwCtFeFO-r/s-l1600.jpg You could use this to flash the latest version of Soarer's conve...

epictronics wrote: ↑

07 Feb 2021, 19:48

Oh, crap, I bought my Teensy already programmed haha. I guess I have to learn how to program it
Well, I have messed around with Arduino's and ESP8266. I'll assume it's easy enough.

Many thanks!

That shouldn't be too hard.
Which Teensy do you have ?

You would need to add this part to your sc file: or Depending on what you want to achieve.

ro0llo wrote: ↑

07 Feb 2021, 14:46

Strictly 5251 or any other forms of beamspring as well?

5152 is preferred, but I'm also interested in other models too