deskthority

Fully up and running! Going to try get this added to qmk repo.
EDIT: wrote about this on my blog

So I've flipped the sockets to the other side and it still works as much as it did before I think.
Now I need to figure out the firmware.

624245305 wrote: ↑

01 Jul 2021, 15:58

firmware

Do you have the firmware for this revision?

Am I being stupid or is this design slightly upside down? It is as pictured tbf but the old revision makes sense with the cable sockets on the top. Do you think if I remove and solder the sockets to the top this will work? IMG_20221216_174757195-min.jpg IMG_20221216_174656579-min.jpg IMG_20221216_17...

So I got one! Unfortunately it doesn't fit in the SSK case.

Can anyone help track down the taobao link for this controller? I emailed the creator but was just sent a new picture of the listing, but I'm not able to track down the listing from the image. 2F4A2809B7E047CDB739219F1EB28F29.jpg https://h5.m.goofish.com/item?id=656161512104&spm=widle.12011849.0.0 ...

Can anyone help track down the taobao link for this controller? I emailed the creator but was just sent a new picture of the listing, but I'm not able to track down the listing from the image.

Ported the firmware to Vial!

Thanks. No multimeter, unfortunately - but presumably you could make a ghetto one with a battery and a small lightbulb? Also, re: bridging the pins, can I do that while the switch is still in? I thought Cherry MX switches sent the signal by breaking the connection rather than making it - or am I ma...

So, I've been working on a THKB prototype board and after soldering it all together, everything works...except for the "Z" and "LGUI" (Win?) key. Now, I want to diagnose if this is a problem with the switches involved or the diodes or solder joints or something else? How would I go about testing th...

I was doing some googling for IBM stuff and found an old thread for this pedal. I don't think these are too widespread and I got the impression they were fairly rare. http://www.ebay.co.uk/itm/IBM-Dictation-Dictator-Transcription-Datahand-Foot-Control-Pedal-/281713559620?hash=item41976fc844:g:tSYAAO...

Ellipse's next project could be making capacitive guts for the IBM SSK. Man, I would buy that in a second! That one's already underway, thanks to Idollar. I have a 1987-vintage SSK just waiting for the capacitive plates. http://deskthority.net/viewtopic.php?t=10744 Wow I completely forgot about thi...

The longer the better I think. I really like the 2.75m mega long Model M cable. I think that is 9 foot ish.

The main thing with DT is we're a small community, where it's hard to be anonymous and act like a dick with impunity. There's something about this place that attracts people like me and Kbdfr (and most the regulars, really) who aren't afraid to offer sharp criticism. Maybe it's because we're mostly...

Great artists steal . Meanwhile, taking those pictures the other day made me swap the NovaTouch off my desk and get back to Model F as my main board again for the first time in a few months. Now, I do like me a bit of Topre, but I've got to say the Kishsaver is a magical board. It's as big as my Re...

I don't think I have seen this on another pcb I have used. It is a nice idea to remove a little doubt.

Just out of interest, is it obvious which way round the diodes go? I'm a bit of an electronics noob, and I don't want to have to desolder and resolder all of them if I get it wrong! ne0phyte did a good job with this. There is a mark for where you need the diodes to go and they have the line on them...

Everything is going quite well
I now just need a case.

Are there any viable diy case ideas that I could concoct?

Looks good, I think the closer spacing feels more IBM-ish. For box graphics I think either option would be good (vector or XT/AT line art style), and since we are not really copying the original style of the boxes for the 50, 62, or 77, which are a little bit bland ( http://deskthority.net/photos-f...

UK people, check out the Fablab website - it seems like a similar deal, but whether or not you need a membership varies per individual shop. Speaking from my experience of the one in Exeter, you can do pretty much anything for free, but you need to supply any materials they don't have it things lik...

The fourth looks the best to me, and I am guessing you used the "men in blue" font to generate that one? I had looked at that font a while ago when box discussions were going on, and it matches the old IBM graphics very well, the only place that it needs some work is on the inter character spacing/...

That is a beautiful arrangement of colour. I am tempted but I would have no idea how to get it working.

I had a go at some packaging design a while ago. I was just thinking of the front of the box and solid colour for the rest or some with a white line. The box of the SSK was the main inspiration. But IBM had some very nice packaging even something like typewriter ribbons look really nice. http://i.im...

They really should have sent out some before-market prototypes for testing and reviews, especially given the fact that the switch housings are machined into the top case. It will be of interest to find out how the aluminum switch housings affect the sound and feel of the HHKB and how the height of ...

I am really not too bothered by the design. I enjoy typing on my atomic with no tilt and I have my hhkb as flat as possible. One issue I am confused about is the usb cutout placement.

Would this be a cheaper option for keycaps? Or is this just for old keycaps?

Would you be able to implement some of the planck shortcuts? and would the reset keycode allow me to go into programming mode or is this something that is hardcoded?

I just realised I might have trouble typing on this. I need an extra switch for 'O' on the homerow. It's not quite colemak friendly. This is my current working layout I may also change the number row to a numpad style arrangement like in the first post. I was also thinking it might be nice to have a...

I agree that micro would be a good choice

Everything's looking good. Please come back.

This is the widest angle you're getting of my one room with a decent bit of natural light! http://deskthority.net/resources/image/23493 http://deskthority.net/photos-f62/post-your-desktop-t1919-1080.html?hilit=ikea%20glass%20shelves#p253072 The plant's a pretty massive yucca actually, which is just...