deskthority

[So, in your case, epoxy pressure is way lower, and air bubbles won't even be compressed 2x. Which means, in current configuration, that the moment epoxy reaches point "B", all the air remaining within the mold will be forced into the feet. I see what you mean. I did not contemplated this option. Y...

No, this was not the case DMA. I made sure that I injected the epoxy from to top (where the spring fits the flipper) and I made a hole to exit the air on the very bottom of the part. Not sure I understand. The way I see it, whichever way you point the flipper, you'll have either multiple high point...

Hello, how many metal stems do you need ? I may have some spares for you. You can PM me to discuss the details, if you are interested. Do not worry, I they will not be expensive at all. If I can help someone to bring his/her keyboard alive, I will be happy. Your joy will pay me back ;) Edit: bak3dbe...

Hello DMA, Good to see that you are back on track :) ! 3 g graphite 14 ml epoxy [*] My flipper does not work! The level change happens, but it is too low. 3/17 = 17%. 4g graphite+13ml epoxy will be 23% - which might just be the ticket (could be mechanically unsuitable, in which case better carbon bl...

Hello, A quick update on the flippers test during the weekend: I managed to create a mold for the flippers using silicone. This is my first attempt at doing something like this. It's a learning curve. I usedthe following mix: 3 g graphite 14 ml epoxy The resulting flipper was not 100% perfect. A par...

Hello,

I have not seen any answer to this from the moderators.
Any progress ?

Regards

i$

Hello,

I was not thinking on the wiki.
My proposal was to self-host the forum.
The wiki should come later

Cheers

i$

Hi, I propose that instead of crying we spin-off ... - Domain cost: 25 euros/year - Server cost: VLE-16 43,79 € inkl. MwSt./Monat (https://www.ovhcloud.com/de/vps/compare/) <= 600 euros/year - Software: linux + phpBB It would mean that we will need to set a legal framework. I propose that the main p...

Hi, I just backed $36 for this. (I have no relation at all with the company behind): https://www.kickstarter.com/projects/1754131047/attack-shark-x65-he-and-x65pro-he-rapid-trigger-keyboard They claim: ⭐0.01mm Rapid Trigger Accuracy ⭐8000Hz Polling Rate, 0.125ms Latency ⭐ATTACK SHARK Magnetic Switch...

DMA wrote: ↑

08 Jan 2025, 04:11

OK, my small additive manufacturing facility is ready for the pilot.
PXL_20250108_030248799.jpg

See ya after surgery! (which is tomorrow)

Very nice ...
Recover soon !

As i have been laid-off from my work for unknown time frame i might try to do something for this project. I honestly prefer that you keep your job rather than doing something for the FMF ! Hi there. Il also post over here as i did few DMs with i$ i proposed resin casting with graphite powder or car...

Dears,

The Leyden Jar are in their way

I believe the consolidated findings from this project should be documented in a centralized location. Searching through the forum is not convenient, and information tends to get lost. Does anyone have suggestions for a tool we could use? We could use the wiki, but to be honest, if the main goal of t...

https://en.wikipedia.org/wiki/IBM_Technical_Disclosure_Bulletin The IBM Technical Disclosure Bulletin was a technical publication produced by IBM between 1958 and 1998. The purpose of the Bulletin was to disclose inventions that IBM did not want their competitors to get patents on. The Bulletin was ...

Hello, Unicomp is selling Replacement Cover Sets & Frames https://www.pckeyboard.com/page/product/CVSET You don't even need to chance the Mini M barrel frame. Unicomp still sells the 84 key SSK barrel frame right here: https://www.pckeyboard.com/page/product/CVSET (choose the Frame-84key option). I ...

I was not aware of this thread !!!! https://deskthority.net/viewtopic.php?f=2&t=25847&start=60 0MaIkV-TV2w There is lot of information to be used. An example: https://deskthority.net/viewtopic.php?f=2&t=25847&p=489498&hilit=Torayca+ASHT+18A#p488482 Hi Dick, Again big thanks. I have a bunch of questi...

Hello DMA, I hadn’t considered the possibility that he might not actually have the design. Instead, he could be pretending to organize the purchasing while actually providing copied samples. If that's the case, he should have shared the source of the parts so that others can access them. But that’s ...

I honestly don’t understand (or maybe I just don’t ;) ) why Model F Labs LLC keeps bringing up other projects and competition when the real issue here is simple. Just to be clear again: I haven’t created any “crowdsourced” project, and I’m not asking for a single cent. I’ve said it before, but I’ll ...

I think it's time to summarize some facts from the recent posts: Model F Labs LLC's representative on DT is Ellipse — factual Model F Labs LLC will not share information — factual, as indicated by PM to me Model F Labs LLC sells products without CE marking to European countries — factual, as indicat...

Hello again,

Done ... I have updated the initial post to indicate that the request to move the marketing / support threads into the "vendors" section, affects various cases.

Massdrop was different because they are a 3rd party. This fight is way over the top - Ellipse is a single person small business who works hard, he is not a big company like IBM in its former glory. It's like attacking your local bakery as if it were an evil big corp. And if you disagree, there's a ...

lmao oh please don't threaten me guy. what are you gonna do start a fake grassroots campaign against me too? lmao. you think you're slick but it's really obvious. Apologies if my message came across as threatening; that was not my intention. I was merely pointing out that you made accusations witho...

Dears, ---------------------- Resin printing ------------------ Continuing with options I have seen the following video ( resin printing ) : BQWV12kIy6E 0.5% 1% and 5% graphite concentration are tested in the video. You may want to jump to the minute 6:40 to see how graphite is mixed with the resine...

Dear Model F Lab LLC, Regarding the old and new paint the CE marking or equivalent certification for other regions is very important. The pain will be in contact with the skin and may produce allergic reactions or event works diseases. I am sure that you do not want this to happen. Could you please ...

Since these issues have been reported, rather than keep prices at their original level and only offer free parts to those who complain, I have taken $125 to $150 off the price of these boards and have discounted replacement cases by half for everyone, but I stand by the project's disclosed note tha...

im convinced now that there's one guy with 10 sock accounts that is going around and shitting up all the threads on the forum with this anti ellipse crusade and it's honestly sickening. please stop. I would suggest you to report the accounts which you believe are acting in this way. In the meanwhil...

@Model F Labs LLC, You keep stating that I am expressing opinions instead of facts. You said that: In fact, I would argue that many mechanical keyboard-related group buys are the opposite of your opinion: many group buys are for discounted keycap sets from large keycap manufacturers, and they do no...

It is supported by QMK using a DAC directly connected to the MCU (it seems ... I am reading fast) !
https://docs.qmk.fm/features/audio

Hi, I was thinking about my IBM collection and I remembered that I have a Model M keyboard with a speaker which I never new how to use. I then thought about the Leyden Jar i2C interface. I made a quick search in google and I came to this : https://forum.arduino.cc/t/sending-audo-via-i2c/468992 Putti...

Hello, If you want to know more about the FSSK and the FEXT refer to this thread: https://www.deskthority.net/viewtopic.php?f=7&t=10744&start=690 I just login in PCBway and I the original FSSK and FEXT order remains for "reorder" :D Running a new round of this GB comes with very little effort. Funct...