deskthority

dox

PCB files and litster case files added to http://ergodox.org/Downloads.aspx

dox

mintberryminuscrunch wrote:looks like the cad files were removed from http://ergodox.org? hm?!?!?!?!?!?!?!?....

The PCB files were never there. I have to ask bpiphany for the latest version and I will add the link.

dox

Seriously, close the thread. I'm done.

dox

Dox, just curious since you've had your prototype going for a while, how is the Shapeways printed case doing? The shapeways cases are holding fine! I use them everyday and couldn't be happier. I'm done here. There is a lot of things that I want to do and arguing on the internet won't get me anywher...

dox

and the phantom....
I'm getting sick of all the whining about massdrop and such by people that never offered to help the project/distribution or organize the group buy themselves.

dox

Webwit, I know you want this to succeed and I'm sure that you would have organized the group buy like me if I could have done it myself. But the case of this project is pretty much closed. If any member want to organize a second run group buy (we've seen this before), he will be more than welcome to...

dox

So if shipping to the US is free and shipping to the world is not, this means it's a US-centered service where people from Europe subsidize free US shipping? Webwit, they are based in the US, so naturally it costs more to ship elsewhere. Frankly, when the project started back in 2011, the estimated...

dox

I got mine today. Amazing work from clickclack!

: IMG_0572_2.jpg (280.35 KiB) Viewed 7481 times

: IMG_0568_2.jpg (292.9 KiB) Viewed 7481 times

dox

Thanks everyone, the ErgoDox was a great project to create with the help of the community.

: IMG_0558.JPG (270.83 KiB) Viewed 39219 times

Spoiler:

dox

Welcome gdaian :). Lol. Good luck with python, it's an amazing amount of fun :). About the rest, FWIW, I'm good with whatever, as long as I can only get the pieces I still need when it happens :). It'd be cool to hear more discussion on case options, even though I may not need one. That's really th...

dox

I've been quite busy lately but I can see that a lot of people want to get the group buy going.
I won't have time to run it personally but someone else can do it.
I don't really care if it's done with massdrop or a group buy. From what I've read in the last few posts, massdrop looks like a good idea.

dox

Thanks guys! Hahah 80's pirating at it's best. I remember recording songs as they played on the radio. 8-) forcefollow: M15x. The U2711 makes it look small. What's wrong with the ergodox teasing? :D bjaven: I find it uncomfortable to reach the trackball in between the two halves.I prefer the "standa...

dox

My desk was too high so I decided to build myself a keyboard tray from scrap wood I had lying around. Pictures: IMG_0498 (small).JPG IMG_0502 (small).JPG IMG_0501 (small).JPG IMG_0504 (small).jpg IMG_0507 (small).JPG IMG_0512 (small).JPG I am very pleased with the result. It's still a ugly desk but ...

dox

With alu plates, you can drill/tap some holes in the bottom plate and get any slope by fitting different screws in those holes.
I tried a lot of different configurations and the best for me is a slope from the inner top to the outer bottom.

dox

One of the 3 feet (upper left) from the KMAC need to be taller then the other 2 to have the slope that you want. This is the slope I'm using at work with my 2nd shapeways case (I need to post pics of that) and it's very comfortable.

dox

Great!
For the feet, it depends on how you want to have it sloped or flat. To get a slope, I would place the 3 corners first and try to mark the position of the thumb foot before sticking it. Or with the dimensions of the feet I could determine the exact position from my 3D model.

dox

I'm almost done on the plate laminate case design. I just need a few extra hours to finish it. I've been very busy in the past weeks. I bought my first house and I'm moving in saturday. plateDesign1.PNG plateDesign2.PNG Countersunk screws would be nice and possible but they require extra machining a...

dox

Northgate Omnikey Evolution

webwit pic:

dox

Did you place the jumpers correctly on the side of the TRRS connector? Any photo of your PCBs?

dox

You can use it with only the controller hand connected but you absolutly need the resistors on the controller side.

I also thing that you need the additional usb connector installed for it to work.

dox

I had the same problem at first. you need to put the two 2.2k resistor and everything should work fine.

Just loading the hex file should work fine.

dox

I added the part list to the website with links to online stores; http://ergodox.org/Hardware.aspx I really need to find some time to put more info on there! ... Thanks bill for the kind words and welcome to DeskThority! I probably spent over 1000$ over the prototype and testing phase. I'm ok with t...

dox

ErgoDox: 38cm to ∞

dox

I got the PCBs from bpiphany today! I should have some Teensy by the end of the week to complete a prototype.

: IMG_0451_1.jpg (340.09 KiB) Viewed 4583 times

: IMG_0448_1.jpg (262.23 KiB) Viewed 4583 times

dox

I knew it! Very nice bpiphany, I can't wait to test it!

dox

Scroll over the taskbar to change the volume. I love this one!

Code: Select all

#If MouseIsOver("ahk_class Shell_TrayWnd")
WheelUp::Send {Volume_Up}
WheelDown::Send {Volume_Down}

MouseIsOver(WinTitle) {
    MouseGetPos,,, Win
    return WinExist(WinTitle . " ahk_id " . Win)
}
return

dox

The PCBs will probably be under 50$ for the pair. The case situation is still pending. I'm currently using a shapeways case that cost ~275$ (because it's angled) and a flat shapeways case cost ~200$. dorkvader is working on a aluminium plate laminate case.

dox

Vader on the ErgoDox.

: IMG_0425_1.jpg (256.45 KiB) Viewed 7542 times

dox

Different kind of bike.

dox

That wasn't long.....

: geekhacked.PNG (87 KiB) Viewed 9354 times

edit: I guess it's some attachment in a post.

deskthority

Search found 72 matches

My new keyboard tray