deskthority

What a mess. What does this mean for the K-type?

https://mechanicalkeyboards.com/shop/in ... ail&p=2370

Based on info on IC's forums, it seems like the K type is back on the front burner. The plate and side integrated case design is pretty amazing. The new holdup seems to be related to a new force curve driven switch design. Personally holding out for that and tactile xmit (if someone can figure out a...

XMIT wrote: ↑

bloo wrote: ↑Any possibility of seeing clicky/tactile variant for round 2?

We're still working on finding a manufacturer that can crank out consistent click and tactile leaves, but this is something we're striving for, yes.

Good to hear.

Any possibility of seeing clicky/tactile variant for round 2?

This is an awfully long thread so I only skimmed it.

I came away with the distinct impression that I should head over to massdrop and order up one of the two TH pbt keysets sets that they have on offer.

So that is what I did.

Thanks, Deskthority.

Buttons...rulers...maybe even a phone...I have no idea what they are up to in Cyprus but it can't be good. http://www.ebay.com/itm/SIEMENS-TA-BS-1200-VINTAGE-KEYBOARD/200925258605?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D2%26asc%3D38530%26meid%3Da4d42dc82320461ab...

What does "Ducky" mean?

I understand. Thank you. I think that the board originated from china and I haven't gotten a response from the GB leader so I'm not sure about documentation or schematics. At this point I'll give it one last go. I'm pretty sure that I can visually map the traces back to the controller. It is plate m...

I don't think that I am getting reliable frequency reading using my mm. Regardless of row or column I am getting 0Hz from the upper left pins on each switch and 60Hz from the lower right. I'm also getting 60 hz from just using one probe to the ground, so I think it's pretty dodgy. MM specs: http://w...

You might check continuity between the pins of that column and ground/earth to see if you might have a short on that column. There is continuity to ground on that column and no other. Investigating further. Does your MM also measure frequency? Then you could watch the controller as it scans the mat...

I did not get any reaction pressing the pin. I went ahead and re-soldered it a bit as well. Still no activity in that column.

keysdead.jpg Was hoping for some help figuring out a dead column my RS84, I've done some preliminary work, but am out of ideas. - -Continuity tests show that the individual switches are connected to each other and a pin on the controller. And lower pin shows connection to the controller if the swit...

Tinz reports on reddit that the keys got delivered and look good. Says he's probably sending them out Monday.

That cap has broken me. I know that it's just the angle ot the light and the texture of the surface in that last photo, but I suddenly need keycaps that twinkle...and I've never needed anything remotely like that before.

50 is really very nice. 25 is gorgeous. I'm interested to hear how receptive SP is to this.

Is there a close date or production schedule for 5a?

This is exactly what I want! Now if only they can come prelubed and stickered....... ~sigh~ I have a board with Gateron blues and a board with Gateron browns, both are stickered and the browns are lubed. If I had to do it all over again I wouldnt have stickered or lubed either of them. The factory ...

Got it, thanks.

Round 5a question. Just to confirm: [HONEYB/TKL/SPH] uses WV/GD white on grey (ROUND4/SPH) and [HONEYB/ALPHAINT/WHITE] uses NN/WFK black on white (Round5/HONEY). Different whites?

Order in. Hope this does well.

I'd get one. Wouldn't mind a an esc and return in the round 5 red either. Think it's a bit of a deeper tone, maybe not to everyone's taste.

There are wfk ones on SA's shop...can't tell which white this set ended up with though...

Cool, thanks. I'm sure that if I get a hold of a set I'll end up polishing them. Had to do that with my dolch dsa set to make them usable. These would be easier.

Very nice. Are these what SP calls "semi matte top and sides" or gloss?