deskthority

Looks great. The Phantom you posted in your other thread looks great too. Too bad the carbon fiber isn't visible with the top layer though.

I have no doubts that if you get it to work and not strip any threads, it will work beautifully. The real question is: Does it offer any advantages? Nut and bolt appears to be the safe option to me. Less risk of problems, less need for as accurate holes, no risk of thread issues etc. I will keep go...

I have no doubts that if you get it to work and not strip any threads, it will work beautifully. The real question is: Does it offer any advantages? Nut and bolt appears to be the safe option to me. Less risk of problems, less need for as accurate holes, no risk of thread issues etc. I will keep goi...

The wall thickness of the outer cylinder looks very thin. Especially since it at the bottom can be very thick, and even at the top can be significantly thicker. That should make it far easier to print.

I have decided to go with bolt and nut.

How much of a blasphemy would you considerit to be to switch out the original screws which hold the case together to allen head ones?

What are people's thoughts on 'through hole+bolt+nut' vs 'screw straight into a hole in the barrel frame'? I am currently looking to order some screws and can't decide. The 'bolt+nut and perhaps a washer as well' seems more reliable in the very long run simply because I tend to dislike threads in pl...

I might be in if you get a UK proxy. As it stands, it is cheaper for EU folks to buy straight from PJRC so I haven't joined even though I will be needing a few.

Well, I have some experience with metal printers :) It started here a long time ago. I stopped back then but I got a few requests recently which I will be making, and I might as well also sell some of my old prototypes. Here is a recent thread where I am collecting ideas That is a render but I have ...

adhoc wrote:

Looks familiar

...I need to find a super-high-quality industrial large ball trackball. I'm sure there's one somewhere, maybe on an old factory machine or submarine missile targeting computer. Yeah, that's what I need. or on ebay :twisted: http://www.ebay.de/itm/Trackball-50mm-Industrie-/161210980897?pt=DE_Computi...

tinnie wrote:I've no idea. Maybe ssk drama? Maybe kishsaver? Maybe I had a little caprice on my sig?

Probably around here

Permaban with no further explanation seems harsh though.

That one is the same in all Euro countries, except for France who has an almost identical one except it is 0.5mm smaller which means that any appliance we bring will have to be forced a little. Grrr

What freaks me out the most is that American plugs don't appear cover their connectors at all. Notice the white insulated part of the pins prevents any live metal from being exposed? Only the tips of the pins are left uncovered, It prevents incidents like the one below, or stupid people attempting t...

You mention "program", and you won't have to. ISO determines the placement and sizes of the keys but the scancodes are interpreted by your oeprating system to whatever language you have it set to. Eg, a German keyboard whas an Ü where the Norwegian has an Å. Their positions are the same and they out...

To add to your list of ISO 60%, there is also Filco Minila and the GH60 custom board.

Converts to 5.56 in ISO land so I guess that 5.5 as Murium mentioned will be easier for me to find. I actually found a nut spinner which appears to be the correct size but its outer diameter is too wide. I will need to buy one.

I decided I am going to teach myself using one of my crappier Model M's. I have a question on what tools you use for opening the case. I didn't take my full toolbox when I moved so it turns out the only socket wrenches I have here are too wide to fit into the rather deep holes where the screw heads ...

I don't mind paying someone to do this type work because only a handful of people are up to the task of handling this type of exertion. I think it is quite easy to find people who can boltmod a board for you, but I consider that to be on a different level than a complete reconditioning like the one...

I had plans of doing the animations with a synchronized graph. The switch could be in 3D and with intersections to show the interiors. Something a bit like this: http://i.imgur.com/fApIFsZ.png Edit: Todo: Better materials and lighting, some improvements to the model, smaller and animated with a sync...

Are the plans still ON for replacements of the R4 SPH caps which were engraved and not doubleshot? I believe you said earlier that molds had been made and that replacements for those SPH caps would be made.

sth wrote:

Findecanor wrote:I would not blame Cooler Master itself, but rather the marketing climate for gaming products.

They set the climate.

And Filco and similar brands don't follow suite, and I believe this to be the major reason why for instance Filco are thought of as a high quality brand.

I am sad to say that I have recommended Cooler Master products to friends in the past. It turns out you are just the same type of low quality company which has to resort to gimmicky false claims aimed towards a market to young to know that they are false. Ultra low latency plugs and things which you...

I know there is no posibility of dibs, which is why I didn't say which one. Anyway, I asked the seller and he doesn't want to ship international so point moot.

two unnamed Cherry G8x-3000 in this lot one unnamed in this Possibly cherry MX Blue in that keyboard - but be aware: comes from a restaurant. A Maltron for quite some asking price here IBM terminal battleship, 1394312 , BIN for pocket money get your wife some keyboard fancy or yourself some flat sp...

7bit, could you confirm that MX white will no longer be manufactured? Until the Logitech order has been filled? Ever?

Findecanor wrote:Apple Extended Keyboard II, Swedish layout, new in box
http://www.tradera.com/apple-extended-k ... _199679094

Not very common with Swedish legends.

Already have one though

The only thing which truly bothered me was the very heavy vignette. It is really distraction now that I looked at it again. The scenery and video was beautiful otherwise.

Matias, Cherry MX, my private keyboard sales and Round 4 leftovers are all handled via CherryMX. Ever thought of, you know, consolidating the threads? The two threads might be kept intact but I think it could be a good idea to add the codes for the Matias switches here. People who are out to buy sw...

Where did the new Matias switches go? Were they in another thread with another bot or am I absolutely mistaken that you were selling them at some point?