Page 75 of 76
Posted: 05 Jul 2017, 01:57
by Myoth
Muirium wrote: ↑I like Madhias'
busy desk full of Round 5 shot… now to make a decent crop.
Madhias Snow White.jpg
VOTP4EE.jpg
That rotated one's beginning to work.
This is really off topic, I'll post somewhere else if this is too off-topic but how did he managed to cut a 11 8/900 into a tkl ?
Posted: 13 Oct 2017, 08:45
by flowerlandfilms
seebart wrote: ↑Slom wrote: ↑ipreferpie's 3277 beamspring PCB
Very nice Slom, I added some to my last post but we got more than enough anyway.
flowerlandfilmsSGI.jpg
Hey that's my baby!
If it's gonna be a header I can take some much better photos.
Posted: 13 Oct 2017, 15:41
by seebart
flowerlandfilms wrote: ↑Hey that's my baby!
There you go.
flowerlandfilms wrote: ↑If it's gonna be a header I can take some much better photos.
I don't manage the headers and as you can see there hasn't been much going on here.
Here is the current list:
headers.php
Posted: 13 Oct 2017, 15:49
by depletedvespene
Can I add one as well?
Posted: 13 Oct 2017, 15:55
by seebart
depletedvespene wrote: ↑Can I add one as well?
Of course, you can add as many as you like!
Look at webwit's first post if you need any help.
Posted: 16 Oct 2017, 22:32
by derzemel
I have a new one, shamesely taken from Lot_Lizard's post
here
Posted: 17 Oct 2017, 17:56
by seebart
derzemel wrote: ↑I have a new one, shamesely taken from Lot_Lizard's post
here
Love it !
Posted: 17 Oct 2017, 20:13
by matt3o
Slom wrote: ↑ipreferpie's 3277 beamspring PCB
3277.jpg
I like this one
Posted: 18 Oct 2017, 09:58
by seebart
matt3o wrote: ↑Slom wrote: ↑ipreferpie's 3277 beamspring PCB
3277.jpg
I like this one
Yeah, that and derzemel's last one should make the cut next time you "retire" some old ones.
Posted: 18 Oct 2017, 10:07
by matt3o
derzemel's is a nice idea, but needs some work. The other one is already online
Posted: 18 Oct 2017, 10:12
by derzemel
matt3o wrote: ↑derzemel's is a nice idea, but needs some work. The other one is already online
yeah, looking at it now it looks crude
Posted: 18 Oct 2017, 10:34
by seebart
derzemel wrote: ↑matt3o wrote: ↑derzemel's is a nice idea, but needs some work. The other one is already online
yeah, looking at it now it looks crude
I still really like it.
matt3o wrote: ↑derzemel's is a nice idea, but needs some work. The other one is already online
Once again, so much for the DT "club"...meh.
Posted: 18 Oct 2017, 10:36
by seebart
seebart wrote: ↑derzemel wrote: ↑matt3o wrote: ↑derzemel's is a nice idea, but needs some work. The other one is already online
yeah, looking at it now it looks crude
I still really like it.
matt3o wrote: ↑derzemel's is a nice idea, but needs some work. The other one is already online
Once again, so much for the DT "club"...meh.
Another small instance why I won't post anymore content...
Posted: 18 Oct 2017, 10:49
by matt3o
you really need to be more specific here.
I'm pointing out that the header image as it is now is a bit rough (as the very same author confirmed). I bet he can work on it and have it published.
Posted: 18 Oct 2017, 11:06
by seebart
matt3o wrote: ↑you really need to be more specific here.
I'm pointing out that the header image as it is now is a bit rough (as the very same author confirmed). I bet he can work on it and have it published.
No let's not get into this any further, if derzemel wants to have another go at his header or not is his call. I may be a bit too "grumpy" once again...
Posted: 18 Oct 2017, 11:17
by matt3o
I sincerely can't see the problem, we've always asked authors to fix their works before publishing. Why is it any different now?
Posted: 18 Oct 2017, 11:49
by derzemel
ok... had another shot at it:
Posted: 18 Oct 2017, 13:02
by seebart
matt3o wrote: ↑I sincerely can't see the problem, we've always asked authors to fix their works before publishing. Why is it any different now?
There really is no "fixing" here since its a creative process. "We" is also very relative, only you and Mu ever managed the headers and our Scotsman was quite a bit less flexible!
Yeah looks slightly better now derzemel!
Posted: 21 Oct 2017, 02:03
by depletedvespene
- Key caps and key stems taking a bath.
- bath.jpg (34.78 KiB) Viewed 15658 times
Posted: 21 Oct 2017, 15:45
by depletedvespene
- Model M and M0110A keycaps.
- rows.jpg (63.72 KiB) Viewed 15672 times
Posted: 23 Jan 2018, 00:13
by Slom
- header.JPG (65.87 KiB) Viewed 15560 times
Posted: 23 Jan 2018, 08:15
by Khers
Posted: 23 Jan 2018, 08:51
by Wodan
I think it would really improve the picture a lot if the wires coming from the keyboard were straightned/aligned with a little more OCD
Posted: 23 Jan 2018, 09:57
by Khers
Wodan wrote: ↑
I think it would really improve the picture a lot if the wires coming from the keyboard were straightned/aligned with a little more OCD
Nope, creative chaos ftw.
Posted: 26 Feb 2018, 19:51
by irishdubguy
New to this hobby and this header caught my eye the first time I came to Deskthority...
Love that gorgeous colour and the deep scoops! I found it around page 47 on this thread but couldn't find any origin info. Is it a vintage set? Any thoughts on an available set that might have that look?
Thanks
Posted: 27 Feb 2018, 16:55
by webwit
Posted: 05 Mar 2018, 06:46
by consolation
- Norbatouch with Jukebox SA.JPG (66.52 KiB) Viewed 15162 times
R2 Norbatouch Enigma Black with R1 SA Jukebox
Posted: 05 Mar 2018, 15:18
by matt3o
those last two are both very nice
Posted: 10 May 2018, 21:58
by digital_matthew
My defunct IBM Wheelwriter barrel plate assembly got caught in a prism.
Posted: 18 May 2018, 12:39
by Madhias
The one right now is great!
- Bildschirmfoto 2018-05-18 um 12.38.08.png (291.86 KiB) Viewed 12569 times