IDENTIFY THE KEYBOARD thread

Findecanor

19 Jan 2019, 22:59

Keybug wrote:
19 Jan 2019, 22:11
Is this a BTC keyboard? Does escape as the only extra-wide key on the board pretty much *always* signify BTC? Thanks.
BTC is the only manufacturer that I know of that did that. If ESC is 1.25, the slight S-curve of the case profile also increases the likelihood that a keyboard is BTC.

User avatar
Polecat

20 Jan 2019, 00:59

Findecanor wrote:
19 Jan 2019, 22:59
BTC is the only manufacturer that I know of that did that. If ESC is 1.25, the slight S-curve of the case profile also increases the likelihood that a keyboard is BTC.
Focus also had the wide escape key on some models <FK-6000=attached> but I don't think this one is a Focus.
Focus FK-6000 (ebay image)
Focus FK-6000 (ebay image)
fk-6000.jpg (92.72 KiB) Viewed 6135 times

User avatar
Keybug

20 Jan 2019, 11:06

I guess the exaggerated reverse slope of the bottom row keycaps is also a telltale sign for BTC?

User avatar
mcmaxmcmc

20 Jan 2019, 11:09

my Monterey dome with slider board also came with a 1.25u Esc key... what a weird board

User avatar
Tigris Calvariam

20 Jan 2019, 20:10

Hi, I'll try to keep this as short as possible.

I bought this keyboard off of Ebay, however the seller didn't have much info on it. There's no sticker on the back, and I haven't been inside it yet (if that even matters). Here's what I know so far...

1. White Alps SKCM ("pine" I think)
2. The connector cable is tiny (as seen in photo) making me think it's from a portable system.
3. AT/XT switch on the back.
4. The flip out feet have "I-80" molded on the underside.
5. The keycaps are doubleshots, but I don't know the type of plastic and there's no yellowing that I can see.
6. On the sides it has latches very similar to the Compaq Portable 1's keyboard.

Any information would be appreciated, thank you.
0.jpg
0.jpg (122.99 KiB) Viewed 6059 times
20190120_133059.jpg
20190120_133059.jpg (2.3 MiB) Viewed 6059 times
20190120_133137.jpg
20190120_133137.jpg (2.25 MiB) Viewed 6059 times
20190120_133249.jpg
20190120_133249.jpg (2.18 MiB) Viewed 6059 times

User avatar
Muirium
µ

20 Jan 2019, 21:11

Quite likely a luggable portable PC’s keyboard. The macro key is quite interesting: it was programmable.

The caps are definitely ABS. Doubleshots always are. It’s still a good colour because it’s been kept in a box all these years, most likely.

User avatar
Polecat

20 Jan 2019, 22:25

Tigris Calvariam wrote:
20 Jan 2019, 20:10
Hi, I'll try to keep this as short as possible.

I bought this keyboard off of Ebay, however the seller didn't have much info on it. There's no sticker on the back, and I haven't been inside it yet (if that even matters). Here's what I know so far...

1. White Alps SKCM ("pine" I think)
2. The connector cable is tiny (as seen in photo) making me think it's from a portable system.
3. AT/XT switch on the back.
4. The flip out feet have "I-80" molded on the underside.
5. The keycaps are doubleshots, but I don't know the type of plastic and there's no yellowing that I can see.
6. On the sides it has latches very similar to the Compaq Portable 1's keyboard.

Any information would be appreciated, thank you.
Neat, I haven't seen that version before. I have a similar keyboard with a different layout. <attached> Mine came with a generic luggable case (which I also have) that was sold with no motherboard. It wasn't part of a name-brand system.
DSCN0328.JPG
DSCN0328.JPG (815.49 KiB) Viewed 6033 times
The only ID on mine is "IMP" followed by a serial number on a small paper label. Mine also has SKCM white Alps, but not double shot caps. This case was intended to take a 386 or 486 mini-AT (not ATX) motherboard, so mid-'90s.
Attachments
DSCN0330.JPG
DSCN0330.JPG (799.36 KiB) Viewed 6033 times

User avatar
ZedTheMan

24 Jan 2019, 19:25

Anyone have any idea of what this board is or what switches lie within? https://rover.ebay.com/rover/0/0/0?mpre ... 3342327453

listofoptions

24 Jan 2019, 19:30

its got microswitch RW switches, no idea about the make/model
I was actually trying to nab that one XD

Slom

24 Jan 2019, 20:05

listofoptions wrote:
24 Jan 2019, 19:30
its got microswitch RW switches, [...]
Close ... its Micro Switch magnetic reed
wiki/Micro_Switch_magnetic_reed
Last edited by Slom on 24 Jan 2019, 20:08, edited 1 time in total.

User avatar
Noobmaen

24 Jan 2019, 20:07

...which is micro switch RW.

Slom

24 Jan 2019, 20:10

Hmm, I read that as SW :oops:

User avatar
ZedTheMan

24 Jan 2019, 21:19

listofoptions wrote:
24 Jan 2019, 19:30
its got microswitch RW switches, no idea about the make/model
I was actually trying to nab that one XD
Well don't worry, I was just more curious than anything! I wish you luck!

Red_October

26 Jan 2019, 05:24

ZedTheMan wrote:
24 Jan 2019, 19:25
Anyone have any idea of what this board is or what switches lie within? https://rover.ebay.com/rover/0/0/0?mpre ... 3342327453
Yeah I'd recognize it anywhere, I own one. It's a Sanders Associates 720 Data Display Station keyboard that's been repurposed into something else. I think mine has, too, it's missing that diode-logic circuit card and the switches are directly wired to a DA-15 plug with hippy cable. Mine's still in full Sanders 720 livery, though.

Aran.E99

26 Jan 2019, 20:04

Top.jpg
Top.jpg (225.49 KiB) Viewed 5765 times
Anyone know anything about this? It looks like an Alfaskop 3700 keyboard (or a similar model) but I can't find anything on it. The keyboard matrix is hand wired and has ribbon connectors soldered to it. Possibly someone's DIY keyboard? It apparently has Clare-Pendar switches but I cannot confirm until I get it.

Gelly

30 Jan 2019, 04:16

Hello! I was referred here by a friend who said you guys can help identify almost anything.

One of my friends in an enthusiast group for the game "The Talos Principle" pulled the textures out for the terminal, and we've been having a heck of a time trying to figure out what it's modeled after. Croteam is known for doing high-quality scans of real objects for textures, such as actually going to ruins in Albania and Egypt to get very accurate texture work, and so it's just a matter of curiosity to see what terminal they might have gotten this from.

Thanks much for your time!

Image

Aran.E99

30 Jan 2019, 17:08

Update - Pulled the spacebar and there is a sticker underneath confirming it is a Datasaab keyboard (Type E00101 0100). Switches are Clare-Pendar SF 5101 (magnetic reed). After seeing it in person, I am confident somebody took an old Datasaab keyboard, desoldered the switches, put them in a strange layout and hand wired them. Still would like to know which machine this originally came from though. (Apologies about the big images :D)

Comparison with an SMK 2nd Gen. Notice the bent spring - it's missing the magnet too :c
switch disassembled.jpg
switch disassembled.jpg (2.24 MiB) Viewed 5631 times
switch open.jpg
switch open.jpg (1.13 MiB) Viewed 5631 times
keycaps.jpg
keycaps.jpg (1.52 MiB) Viewed 5631 times
thicc doubleshot.jpg
thicc doubleshot.jpg (2.25 MiB) Viewed 5631 times
datasaab.jpg
datasaab.jpg (1.41 MiB) Viewed 5631 times

User avatar
Muirium
µ

30 Jan 2019, 18:49

@Aran:

What was the hand wiring hooked up to: a Teensy or something vintage? Seems a strange layout to try to use today, given the lack of alpha block keys. You'd need to memorise some pretty weird combos just to type brackets and commas!


@Gelly:

Nice piece of work. When I first saw the image, I thought of this!

Image
https://rockybergen.com/papercraft/

Naturally, similar modelling work goes on inside games. Whoever put that together, I'm impressed. Can't say I recognise the hardware, however. For what little my knowledge is worth, it looks to be an AT or ATX era system, judging by the standard looking power supply on the back. That single populated card slot has some oddball ports on it. Could be a spot of creative licence all round. Got some pics of it as it appears in game?

If anyone knows what those graphical legends are about on the keyboard, meanwhile…

Aran.E99

30 Jan 2019, 19:22

@Muirium - nope, no controller. Appears to be wired as a 5x8 matrix.
wiring.jpg
wiring.jpg (1.95 MiB) Viewed 5573 times
looks like an old PYE PCB edge connector someone snapped.
connector.jpg
connector.jpg (1.58 MiB) Viewed 5573 times
Coolest part is this old masking tape where someone has written what looks like a diagram for the PF keys!
diagram.jpg
diagram.jpg (1.67 MiB) Viewed 5573 times
I really wish I could source the missing keycaps - would make a cool restoration project.

ghostdawg187

31 Jan 2019, 13:53

I have not found anything about a Cherry G80-1800HPMDE. Can you please provide some information like what kind of keycaps and switches?

User avatar
Chyros

31 Jan 2019, 13:59

H = doubleshot ABS
P = MX black (or clear if Reuters)
M = winkey
DE = German layout

wiki/Cherry_article_numbers

;)

User avatar
kbdfr
The Tiproman

31 Jan 2019, 15:47


ghostdawg187

31 Jan 2019, 17:00

Chyros wrote:
31 Jan 2019, 13:59
wiki/Cherry_article_numbers
Awesome! Now I am able decode any Cherry model number. Thank you very much and all the people contributing to the deskthority-wiki.

PS: Shame on me! I should have been able to get this information on my own. But I was in a hurry, so please bear with me!

User avatar
OleVoip

31 Jan 2019, 19:53

Aran.E99 wrote:
30 Jan 2019, 17:08
After seeing it in person, I am confident somebody took an old Datasaab keyboard, desoldered the switches, put them in a strange layout and hand wired them. Still would like to know which machine this originally came from though.
datasaab.jpg
This keyboard came from an Alfaskop 3500 series terminal, which were sold from 1974 on until the end of the 1970ies, when they were succeeded by system 37 aka the 3700 series with reddish brown keys, not blue ones. There were several models in the 3500 series, also custom-made systems, but this one definitely has been tinkered with. That's sad, but, on the other hand, it probably wouldn't have survived otherwise.

artlogic

31 Jan 2019, 20:11

I have a 3rd party mechanical numeric keypad designed for an Apple II and I'm wondering if anyone can tell me information about the switches. Are they any good? Is this worth reverse engineering?
IMG_20190131_140918_1.jpg
IMG_20190131_140918_1.jpg (3.58 MiB) Viewed 5397 times
IMG_20190131_131321.jpg
IMG_20190131_131321.jpg (2.84 MiB) Viewed 5397 times
IMG_20190128_144836.jpg
IMG_20190128_144836.jpg (3.37 MiB) Viewed 5397 times
The switches have four contacts (I think they're double pole?). I haven't been able to find much about the keyboard or any markings on the switches.

Any help is appreciated.

User avatar
matt3o
-[°_°]-

31 Jan 2019, 20:24

artlogic wrote:
31 Jan 2019, 20:11
I have a 3rd party mechanical numeric keypad designed for an Apple II and I'm wondering if anyone can tell me information about the switches. Are they any good? Is this worth reverse engineering?
that is an adorable piece. I would totally reverse engineer the hell out of it :D I don't know much about it sorry, I can't help

Aran.E99

31 Jan 2019, 21:07

OleVoip wrote:
31 Jan 2019, 19:53
Aran.E99 wrote:
30 Jan 2019, 17:08
After seeing it in person, I am confident somebody took an old Datasaab keyboard, desoldered the switches, put them in a strange layout and hand wired them. Still would like to know which machine this originally came from though.
datasaab.jpg
This keyboard came from an Alfaskop 3500 series terminal, which were sold from 1974 on until the end of the 1970ies, when they were succeeded by system 37 aka the 3700 series with reddish brown keys, not blue ones. There were several models in the 3500 series, also custom-made systems, but this one definitely has been tinkered with. That's sad, but, on the other hand, it probably wouldn't have survived otherwise.
Thanks, I figured as much but thought it was an Alfaskop 3700 since theres little info on google :D. Although not ideal, I'm considering rewiring it using a Teensy so at least it's its usable :(

User avatar
Muirium
µ

31 Jan 2019, 22:37

Ha, what a wiring job! I see whole switches with nothing connected. Definitely fair game to do your own Teensy refit.

You may well be right that particular keyboard only survived because someone chose to do this. Such old gear always has a story.

User avatar
Felima

31 Jan 2019, 22:46

Does anyone know what keyboard could this be?
Model name is Typ 263.12
Thank you
Attachments
52b71db7-2e6b-4c93-9a82-f38799a797f3 (2).jpeg
52b71db7-2e6b-4c93-9a82-f38799a797f3 (2).jpeg (53.75 KiB) Viewed 5345 times
0b9832a9-d4ef-47ea-a1d1-c6768502b425 (1).jpeg
0b9832a9-d4ef-47ea-a1d1-c6768502b425 (1).jpeg (56.97 KiB) Viewed 5345 times

davkol

01 Feb 2019, 12:49

263.12, obviously, from Metra Blansko

The keycaps are dyesub PBT with the apparent bleed.

Post Reply

Return to “Keyboards”