Re: [Newbie] Want to create a DIY ortholinear mechanical keyboard
Posted: 07 Feb 2019, 21:06
OK !! Now this is a success. I am currently writing these lines on my brand new keyboard. I am not acquainted yet with the orthogonal matrix, but it comes fastly. 
)
I need to perfect it, because for now I have no arrow keys, Windows or Del key (only backspace) . But this is already a good result!
I must say some things:
- I got 2 soldering bugs (e.g. a column with 2 wires and an empty one).
- I had to adapt the LAYOUT as follows and invert the rows from 4 to 0:
The Pro Micro board was apparently capricious, but I succeeded in the end to upload the hex file... Now I need to make a beautiful case…
)I need to perfect it, because for now I have no arrow keys, Windows or Del key (only backspace) . But this is already a good result!
I must say some things:
- I got 2 soldering bugs (e.g. a column with 2 wires and an empty one).
- I had to adapt the LAYOUT as follows and invert the rows from 4 to 0:
Code: Select all
#define LAYOUT( \
K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K64, K65, K66, K67, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K60, K61, K62, K63, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K59, K58, K69, K68, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K54, K55, K56, K57, \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K50, K51, K52, K53 \
) { \
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A }, \
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A }, \
{ K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A }, \
{ K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, }, \
{ K60, K61, K62, K63, K64, K65, K66, K67, K68, K69, } \
}
