Another guy on reddit selling a Wingnut (for $10.000 ?!?!?!?!!!)
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Plastic, not sure what kind webwit would know. Mine feels like plastic.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
OK, I could not tell you. Pretty solid though for such a little piece. Here are lot_lizards:chzel wrote: ↑They should be some kind of castable epoxy resin.
- Blaise170
- ALPS キーボード
- Location: Boston, MA
- Main keyboard: Cooler Master Quickfire Stealth
- Main mouse: Logitech G502
- Favorite switch: Alps SKCM Blue
- DT Pro Member: 0129
- Contact:
As special as one of these are... I can't say I'd decline an offer of $10,000. It would be immensely more useful than a piece of plastic when it comes to paying off debts.
-
- Location: --
- Main keyboard: --
- Main mouse: --
- Favorite switch: --
- DT Pro Member: -
You can already 3D print a small house for $11K in a day! I will take a house over a single piece of plastic any dayBlaise170 wrote: ↑As special as one of these are... I can't say I'd decline an offer of $10,000. It would be immensely more useful than a piece of plastic when it comes to paying off debts.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
But the 3D printed wingnuts will not look 100% like the original that is hand-made if I recall.
-
- Location: --
- Main keyboard: --
- Main mouse: --
- Favorite switch: --
- DT Pro Member: -
The comment was about the fact that you can 3D print a house for almost the same price as this tool was trying to sell the wingnut for.seebart wrote: ↑But the 3D printed wingnuts will not look 100% like the original that is hand-made if I recall.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Sure, but who wants to live in 3D printed house?
-
- Location: --
- Main keyboard: --
- Main mouse: --
- Favorite switch: --
- DT Pro Member: -
Watch the video, and I'm sure you would!seebart wrote: ↑Sure, but who wants to live in 3D printed house?
skip ahead a minute and a half
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Yeah OK it does look pretty nice. I bet that technology will really take off in coming years.
-
- Location: --
- Main keyboard: --
- Main mouse: --
- Favorite switch: --
- DT Pro Member: -
Yeah! It's so cool. It's already way better than those american houses that always get destroyed by hurricanes. You know, those thin walled ones that everyone has!seebart wrote: ↑Yeah OK it does look pretty nice. I bet that technology will really take off in coming years.
- Dingster
- Location: Slovenia
- Main keyboard: Novatouch
- Main mouse: MX518
- DT Pro Member: -
Drywall panels are what most houses use, Ive worked with it before, and it really isnt suitable for anything else other than some inner walls (IMO) and even that is a little iffy. Think of it as plaster in between two "cardboard" sheets. Fun fact, to get your desirable shape you cut it with a knife
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Well here we still build the houses the good-old way. No 3d printed houses here.
- Blaise170
- ALPS キーボード
- Location: Boston, MA
- Main keyboard: Cooler Master Quickfire Stealth
- Main mouse: Logitech G502
- Favorite switch: Alps SKCM Blue
- DT Pro Member: 0129
- Contact:
It doesn't really matter what your house is made out of, unless you are living in a steel conic structure, you are going to have a bad time with a hurricane.
-
- Location: --
- Main keyboard: --
- Main mouse: --
- Favorite switch: --
- DT Pro Member: -
I don't know why they haven't been building better hurricane-proof houses in the affected areas. Are they just building the exact same houses and expecting different results? Or is it cheaper to build a house every time a hurricane knocks it down?
- mike52787
- Alps Aficionado
- Location: South-West Florida
- Main keyboard: G80-5000HAAUS
- Main mouse: Zowie EC1-A
- Favorite switch: Vintage MX Black
- DT Pro Member: 0166
I live in florida and was just in the path of irma when it was category 3, my house and my entire neighborhood suffered no damage. The effects of hurricanes are highly exaggerated usually, mainly for sensationalized news coverage. Here (where hurricanes actually happen) most houses are made of concrete block, with thick storm rated windows. I dont know where the US "cardboard house" meme came from but from personal experience I can say it is unfounded.
-
- Location: --
- Main keyboard: --
- Main mouse: --
- Favorite switch: --
- DT Pro Member: -
Oh okay! So it's not that bad. Still, it's always good to make progress (like this 3D printed house). If this house had a second floor, it would be perfect for me!mike52787 wrote: ↑I live in florida and was just in the path of irma when it was category 3, my house and my entire neighborhood suffered no damage. The effects of hurricanes are highly exaggerated usually, mainly for sensationalized news coverage. Here (where hurricanes actually happen) most houses are made of concrete block, with thick storm rated windows. I dont know where the US "cardboard house" meme came from but from personal experience I can say it is unfounded.
- Blaise170
- ALPS キーボード
- Location: Boston, MA
- Main keyboard: Cooler Master Quickfire Stealth
- Main mouse: Logitech G502
- Favorite switch: Alps SKCM Blue
- DT Pro Member: 0129
- Contact:
No, Florida actually passed laws back in 1992 that buildings had to be designed better to cope with hurricanes. But here's the thing: If you take Hurricane Irma that hit Florida this year, you are looking at peak wind speeds of over 180MPH (~300KM/h). Anything that gets picked up by the wind now becomes an extremely dangerous flying projectile which can destroy just about anything in its path.
- mike52787
- Alps Aficionado
- Location: South-West Florida
- Main keyboard: G80-5000HAAUS
- Main mouse: Zowie EC1-A
- Favorite switch: Vintage MX Black
- DT Pro Member: 0166
quite true, the reason we cover windows and doors with boards during the storm is not because of the high winds, but because of flying debris. if a window or door is compromised by something picked up by the wind, often times the wind will tear the roof off of the house due to the pressure from the wind inside.Blaise170 wrote: ↑No, Florida actually passed laws back in 1992 that buildings had to be designed better to cope with hurricanes. But here's the thing: If you take Hurricane Irma that hit Florida this year, you are looking at peak wind speeds of over 180MPH (~300KM/h). Anything that gets picked up by the wind now becomes an extremely dangerous flying projectile which can destroy just about anything in its path.
-
- Location: --
- Main keyboard: --
- Main mouse: --
- Favorite switch: --
- DT Pro Member: -
Blaise170 wrote: ↑No, Florida actually passed laws back in 1992 that buildings had to be designed better to cope with hurricanes. But here's the thing: If you take Hurricane Irma that hit Florida this year, you are looking at peak wind speeds of over 180MPH (~300KM/h). Anything that gets picked up by the wind now becomes an extremely dangerous flying projectile which can destroy just about anything in its path.
I would still not move to florida due to the overly hot weather and the natural disasters that will get worse and worse with climate change.
- mike52787
- Alps Aficionado
- Location: South-West Florida
- Main keyboard: G80-5000HAAUS
- Main mouse: Zowie EC1-A
- Favorite switch: Vintage MX Black
- DT Pro Member: 0166
Yeah, florida fucking sucks. dont come here.green-squid wrote: ↑Blaise170 wrote: ↑No, Florida actually passed laws back in 1992 that buildings had to be designed better to cope with hurricanes. But here's the thing: If you take Hurricane Irma that hit Florida this year, you are looking at peak wind speeds of over 180MPH (~300KM/h). Anything that gets picked up by the wind now becomes an extremely dangerous flying projectile which can destroy just about anything in its path.
I would still not move to florida due to the overly hot weather and the natural disasters that will get worse and worse with climate change.
- Menuhin
- Location: Germany
- Main keyboard: HHKB PD-KB400BN lubed, has Hasu Bt Controller
- Main mouse: How to make scroll ring of Expert Mouse smoother?
- Favorite switch: Gateron ink lubed
- DT Pro Member: -
These Wingnut award caps totally look like made of metal from the details of its casting, and from the shine and texture.
Good choice of resin, and competent casting techniques, plus good choice of color / paint.
Solid proof of DT having the technical know-how of casting custom caps, if there is a need for that.
- Menuhin
- Location: Germany
- Main keyboard: HHKB PD-KB400BN lubed, has Hasu Bt Controller
- Main mouse: How to make scroll ring of Expert Mouse smoother?
- Favorite switch: Gateron ink lubed
- DT Pro Member: -
Just found out there were 18 Nobel Prize previously auctioned off.
https://coinweek.com/coins/medals-and-t ... -auctions/
That's logical, warmongers could become Peace Prize Laureates, and the Literature prize also totally depends on the nominee's political stance. 18-karat gold is the real deal though.
https://coinweek.com/coins/medals-and-t ... -auctions/
That's logical, warmongers could become Peace Prize Laureates, and the Literature prize also totally depends on the nominee's political stance. 18-karat gold is the real deal though.
- chzel
- Location: Athens, Greece
- Main keyboard: Phantom
- Main mouse: Mionix Avior 7000
- Favorite switch: Beamspring, BS, Vintage Blacks.
- DT Pro Member: 0086
They are not DT-made, someone with probably the best know-how in the game is responsible for them...Menuhin wrote: ↑ These Wingnut award caps totally look like made of metal from the details of its casting, and from the shine and texture.
Good choice of resin, and competent casting techniques, plus good choice of color / paint.
Solid proof of DT having the technical know-how of casting custom caps, if there is a need for that.
- pr0ximity
- Location: Maine, USA
- Main keyboard: Anything linear with Cherry caps
- Main mouse: Microsoft WMO 1.1A
- Favorite switch: IBM Beamspring (metal chassis)
- DT Pro Member: 0173
And perhaps the most mysterious origins, materials, techniques, and experience.chzel wrote: ↑They are not DT-made, someone with probably the best know-how in the game is responsible for them...Menuhin wrote: ↑ These Wingnut award caps totally look like made of metal from the details of its casting, and from the shine and texture.
Good choice of resin, and competent casting techniques, plus good choice of color / paint.
Solid proof of DT having the technical know-how of casting custom caps, if there is a need for that.
- Blaise170
- ALPS キーボード
- Location: Boston, MA
- Main keyboard: Cooler Master Quickfire Stealth
- Main mouse: Logitech G502
- Favorite switch: Alps SKCM Blue
- DT Pro Member: 0129
- Contact:
In regards to a Grammy or Nobel Prize, some people collect them like we collect keyboards. Hard for me to pass judgement without knowing the circumstance.
- Menuhin
- Location: Germany
- Main keyboard: HHKB PD-KB400BN lubed, has Hasu Bt Controller
- Main mouse: How to make scroll ring of Expert Mouse smoother?
- Favorite switch: Gateron ink lubed
- DT Pro Member: -
To name just one tiny case:chzel wrote: ↑They are not DT-made, someone with probably the best know-how in the game is responsible for them...Menuhin wrote: ↑ These Wingnut award caps totally look like made of metal from the details of its casting, and from the shine and texture.
Good choice of resin, and competent casting techniques, plus good choice of color / paint.
Solid proof of DT having the technical know-how of casting custom caps, if there is a need for that.
They run the game so well that, for example, Al Gore ended up having so much money to buy an 8+ million Miami beach-side ocean view villa, to top his Tennessee luxurious mansion that consume energy 21 times more than an average US home. Not to mention all the private / corporate jet hypocrisy of him and his Hollywood minions.
Obviously they scare and alarm the shxt out of people, but they themselves are quite relaxed about their own "predictions" and don't actually give a dime.
An average US home already consumes way more energy than most homes in the world, e.g. an average home in Germany. People are dressing up more like winter INDOOR in Germany, and to my experience, many US homes are like summer indoor during the winter.
- Menuhin
- Location: Germany
- Main keyboard: HHKB PD-KB400BN lubed, has Hasu Bt Controller
- Main mouse: How to make scroll ring of Expert Mouse smoother?
- Favorite switch: Gateron ink lubed
- DT Pro Member: -
Some of us (actually I) argue that the Wingnuts from DT can well be a fairer and honorable prize when compared to some (but not all) of the Nobel Prizes. But we cannot rule out the possibility that recipients of Wingnuts may reach the level of Einstein in the future.chzel wrote: ↑What does Al Gore and his Miami villa have to do with who makes our wingnuts??? Did I miss something?