Does anyone have any advice on the best wrist rest size and shape?
I've had a load of wallnut and oak delivered and was wondering what would be a good start?
Wrist Rest sizes
-
itlnstln
- Location: San Antonio, TX
- Main keyboard: Noppoo Choc Mini
- Favorite switch: Cherry Brown
- DT Pro Member: -
My standard requirements when looking for a wrist rest:
-Flat, not rounded like the gel type
-As tall as the front lip of the keyboard case (about 3/4" or so for most 'boards)
-Generally rectangular in shape (this is more aesthetic than anything)
-As close to exactly the length of the keyboard; a little shorter is fine but not longer
-The wider the better. My Milestone is about 3" wide, and I find that to be a great length
Obviously, this is what I like, YMMV.
-Flat, not rounded like the gel type
-As tall as the front lip of the keyboard case (about 3/4" or so for most 'boards)
-Generally rectangular in shape (this is more aesthetic than anything)
-As close to exactly the length of the keyboard; a little shorter is fine but not longer
-The wider the better. My Milestone is about 3" wide, and I find that to be a great length
Obviously, this is what I like, YMMV.
-
dirge
- Location: Newcastle Upon Tyne, United Kingdom.
- DT Pro Member: -
Was going to do something for a model m so half a tree needed lol.
Wanted to mess around a little see what I could do, maybe do a wooden phantom case. Set myself up to fail maybe? I've a great track record for starting things and leaving them half finished...
Wanted to mess around a little see what I could do, maybe do a wooden phantom case. Set myself up to fail maybe? I've a great track record for starting things and leaving them half finished...