Stuff you just bought

User avatar
Scarpia

17 Jan 2021, 17:57

Went to a liquidation sale of a four story technical museum today, unfortunately it was the second day so much of the best stuff was long gone. Don’t think there was anything keyboard related anyway.

Still, managed to get this Odhner calculator (arithmometer) from 1927-29 for less than $25 (found out they go for >$300 online :-O guess I made a good deal!)

Apologies for the potato pic:
748164BB-09B3-4D41-9208-8E28CEE48FF4.jpeg
748164BB-09B3-4D41-9208-8E28CEE48FF4.jpeg (281.96 KiB) Viewed 21634 times

Rayndalf

18 Jan 2021, 09:40

Scarpia wrote:
17 Jan 2021, 17:57
Went to a liquidation sale of a four story technical museum today, unfortunately it was the second day so much of the best stuff was long gone. Don’t think there was anything keyboard related anyway.

Still, managed to get this Odhner calculator (arithmometer) from 1927-29 for less than $25 (found out they go for >$300 online :-O guess I made a good deal!)

Apologies for the potato pic:

748164BB-09B3-4D41-9208-8E28CEE48FF4.jpeg
That's a really nice piece. Old adding machines are really cool, especially when they've been maintained (the old linkages and stuff are hell to work on).

I recently (a few hours ago) found an old typewriter by a local dumpster. Not quite as cool, and needs a little work, but I can't complain for the price.

The thing weighs a ton, with lots of cast iron and lined with felt. My hands were still pretty tired when I took the first pic.
Attachments
20210117_223948.jpg
20210117_223948.jpg (2.37 MiB) Viewed 21551 times
20210117_210548.jpg
20210117_210548.jpg (2.48 MiB) Viewed 21551 times

John Doe

24 Jan 2021, 12:24

:D :D
Last edited by John Doe on 06 Sep 2021, 18:12, edited 1 time in total.

User avatar
zrrion

28 Jan 2021, 21:52

Just ordered these:
Image

Image

Facitman was very kind in providing documentation for them (they are rebrands of Facit machines as far as I can tell) so I have a list of strong possibilities but still don't know for sure what they will have. Regardless of what they have I really like the layout and the look of the caps is very good (though there are even nicer looking ones) so basically no matter what these will be cool.

User avatar
hellothere

07 Feb 2021, 03:12

I'll just link to the wiki. Better pics, although my keyboard is in similarly good shape. Seijin Electron EAT-1010 badged "6000SX by Leading Technology Inc." Futaba MA clicky. Chyros did a couple videos on the switches ("Mmmm. Hmmm. Yummy. It is yummy").

Chyros' typing demo sounds a ton higher pitched than the one I have. It's about as loud and bassy as my Kailh Box Jades. It also almost feels like I have a solenoid in the case.

Keycaps are thick double-shot inverse cross mount, as in the the Wiki. It also has this great font that's possibly bold Helvetica. Slashes through both of the zeros.

So far, it's a pretty nice driver. However the back side (south side) of the spacebar is very high and that's getting a tad painful. It's not like I can go out and just buy another spacebar for this thing, so I'll see if I can adjust my typing to the keyboard.

User avatar
Touch_It

22 Feb 2021, 07:25

Bought on a whim. Had been wanting to own a topre board without the price and mx stems and the price sold me.
Attachments
Screenshot_20210222-002148_Woot.jpg
Screenshot_20210222-002148_Woot.jpg (508.99 KiB) Viewed 20735 times

Jan Pospisil

22 Feb 2021, 08:49

Ghnnn, I've been holding out on buying that exact one. I do love the idea of the switch, its sound etc. But I really really hate the modern case height with exposed switches at the bottom. (also the silver thing...)

xxhellfirexx

22 Feb 2021, 09:47

hellothere wrote:
07 Feb 2021, 03:12
So far, it's a pretty nice driver. However the back side (south side) of the spacebar is very high and that's getting a tad painful. It's not like I can go out and just buy another spacebar for this thing, so I'll see if I can adjust my typing to the keyboard.
Is flipping the spacebar an option? I had the same problem with my NMB and doing that made a huge difference.

User avatar
Muirium
µ

22 Feb 2021, 10:04

Well, if you flip it, you will be *judged*. So bear that in mind!
Jan Pospisil wrote:
22 Feb 2021, 08:49
Ghnnn, I've been holding out on buying that exact one. I do love the idea of the switch, its sound etc. But I really really hate the modern case height with exposed switches at the bottom. (also the silver thing...)
At that price, very tasty indeed! Costs a good bit more over here, and then there's getting held up at imports…

I've never actually tried a Topre clone myself. But from the NovaTouch experience, I can tell you the feel can get messed up really easily by design details. CM and Topre teamed up on that board, and it just wasn't right. The cloners better know what they're doing!

But, again, that price is worth a peek.

User avatar
Scarpia

22 Feb 2021, 11:26

I bought a ‘Nopre’ board a few years back and used it as my daily driver for a long time — a nice cherry-compatible TKL branded as Royal Kludge RC930-87.

I don’t know about any of the other Topre clones, but this one was pretty great, especially since I could dress it up with nice keycaps like Dolch DSAs:

Image

User avatar
hellothere

23 Feb 2021, 00:23

xxhellfirexx wrote:
22 Feb 2021, 09:47
hellothere wrote:
07 Feb 2021, 03:12
So far, it's a pretty nice driver. However the back side (south side) of the spacebar is very high and that's getting a tad painful. It's not like I can go out and just buy another spacebar for this thing, so I'll see if I can adjust my typing to the keyboard.
Is flipping the spacebar an option? I had the same problem with my NMB and doing that made a huge difference.
B...But I'll be judged!

The most accurate answer is "I don't know." I took it out of service because I finished up a AEK II that I installed orange Alps in and wanted to make sure all the keys were working right. I do remember that the last several keyboards I worked on had a pillar to the left (west) of the switch, so you couldn't flip the spacebar. I don't know why companies don't/didn't standardize on just rounded edges. That sounds like it'd be an easy solution. Well, screws for the case would be logical, too ...

User avatar
Touch_It

24 Feb 2021, 17:19

Muirium wrote:
22 Feb 2021, 10:04
Well, if you flip it, you will be *judged*. So bear that in mind!
Jan Pospisil wrote:
22 Feb 2021, 08:49
Ghnnn, I've been holding out on buying that exact one. I do love the idea of the switch, its sound etc. But I really really hate the modern case height with exposed switches at the bottom. (also the silver thing...)
At that price, very tasty indeed! Costs a good bit more over here, and then there's getting held up at imports…

I've never actually tried a Topre clone myself. But from the NovaTouch experience, I can tell you the feel can get messed up really easily by design details. CM and Topre teamed up on that board, and it just wasn't right. The cloners better know what they're doing!

But, again, that price is worth a peek.
Chyros actually did a review of the tkl version of this board 10 months ago, though i think it was the v1. He spoke of it favorably when compared to realforce boards. I'll get the board tonight. Excited to test it out. My only other topre exp was on a type heaven 4 years ago.

User avatar
XMIT
[ XMIT ]

24 Feb 2021, 17:36

I like to think I coined the term "Nopre". I thought I came up with it independently but maybe I heard it from someone else. I was using this term in 2016.

The key was to do a 55g Korean dome swap, and try to find a board with the revision two polycarbonate (crystal clear) sliders. They were much smoother. My nicest "Nopre" boards are on the level with a Realforce RGB.

In fact I brought my nicest board to HaaTa himself and we got a force curve on it.

https://chart-studio.plotly.com/~haata/573

Image

User avatar
hellothere

11 Apr 2021, 00:07

hellothere wrote:
07 Feb 2021, 03:12
<I just bought a> Seijin Electron EAT-1010 badged "6000SX by Leading Technology Inc." Futaba MA clicky. Chyros did a couple videos on the switches ("Mmmm. Hmmm. Yummy. It is yummy").

<snip>

However the back side (south side) of the spacebar is very high and that's getting a tad painful. It's not like I can go out and just buy another spacebar for this thing, so I'll see if I can adjust my typing to the keyboard.
So, I bought another Seijin with Futaba MA switches. Here's the pic after retr0brighting the white keys ...
Spoiler:
sejin.jpg
sejin.jpg (1.09 MiB) Viewed 20053 times
I do need to wait for more cream developer to come in so I can also do the grey keys, as they're very slightly yellow. One to two week wait.

The mounting plate was just mildly dusty and compressed air fixed that problem. It's like someone used this thing for a week in 1990 then put it on a shelf.

The spacebar on this one is even more sloped. I first rotated the spacebar 180 degrees to see if that helped (it's an odd stabilizer mount, but you can flip it easily). Nope. Now it just feels weird, man. I tried rotating the original spacebar. Not any better. *Deep sigh.* I really want to like this keyboard because the typing feel is fantastic.

John Doe

20 Apr 2021, 15:53

Cherry black, very huge,

and yellowed..
Last edited by John Doe on 06 Sep 2021, 18:09, edited 1 time in total.

User avatar
JP!

20 Apr 2021, 19:55

A Micro Switch avionics keyboard :shock:

avionics.jpg
avionics.jpg (241.17 KiB) Viewed 19892 times

User avatar
inmbolmie

20 Apr 2021, 20:06

John Doe wrote:
20 Apr 2021, 15:53
Cherry black, very huge,

and yellowed..


04BEABA7-72DF-4763-A6CC-2D32073CAB0D.jpeg
Oh god, so many buttons don't even fit on my screen!

Rayndalf

21 Apr 2021, 05:56

John Doe wrote:
20 Apr 2021, 15:53
Cherry black, very huge,

and yellowed..


04BEABA7-72DF-4763-A6CC-2D32073CAB0D.jpeg
Glad to see another.
If for any reason you need a replacement keyboard assembly let me know. Mine uses a lan cable style connector but supposedly uses USB.
Attachments
20210420_185338.jpg
20210420_185338.jpg (1.69 MiB) Viewed 19821 times

User avatar
derzemel

28 Apr 2021, 20:34

Just got a Cherry NCR G80-0528HAD for the equivalent of 10Eur.

It is yellowed, most of the keycaps are shiny, clearly has been smoked around (it actually has a light smell), but it is unexpectedly clean (not really that much dirt or dust in it).

Image

Image

User avatar
snuci
Vintage computer guy

05 May 2021, 21:42

Blue Alps on a vintage NEC portable?
IMG_2069.jpg
IMG_2069.jpg (215.31 KiB) Viewed 19479 times
IMG_2070.jpg
IMG_2070.jpg (197.57 KiB) Viewed 19479 times

User avatar
JP!

05 May 2021, 21:51

sd1.jpg
sd1.jpg (346.14 KiB) Viewed 19469 times
sd2.jpg
sd2.jpg (474.8 KiB) Viewed 19469 times

User avatar
Go-Kart

08 May 2021, 14:40

This may be the most boring-looking keyboard I have bought of late. Not even vintage either. I needed a quiet, full size for work that won't induce any fatigue over a normal working day.

Enter the RF R2 PFU Edition. I would have preferred the white version but for the price I got it for new, particularly with it ticking all the other boxes, I cannot complain.
Attachments
PXL_20210508_123449355.jpg
PXL_20210508_123449355.jpg (3.72 MiB) Viewed 19299 times

User avatar
Muirium
µ

08 May 2021, 15:13

Ninja-grey Topres aren't really my style, either, but I bet that one types right satisfying and heavenly-like. It's not a shower, it's the kind of keyboard you just somehow always seem to actually use. ;)
JP! wrote:
05 May 2021, 21:51
Spectacular board, JP! Reminds me of something… Got any plans to *use* it? A little more challenging than just plugging it in, unless you've a Honeywell terminal lying around.

User avatar
Go-Kart

08 May 2021, 16:13

Muirium wrote:
08 May 2021, 15:13
Ninja-grey Topres aren't really my style, either, but I bet that one types right satisfying and heavenly-like. It's not a shower, it's the kind of keyboard you just somehow always seem to actually use. ;)
I've been using it for about an hour and it's brilliant. Although, I must admit, I've already thought, "Maybe I should take Mu up on one of those cap sets..."

User avatar
Muirium
µ

08 May 2021, 16:15

Spoiler:

User avatar
JP!

08 May 2021, 16:17

JP! wrote:
05 May 2021, 21:51
Spectacular board, JP! Reminds me of something… Got any plans to *use* it? A little more challenging than just plugging it in, unless you've a Honeywell terminal lying around.
[/quote]

Thanks for sharing that link. Always a good read. What you can't see from these pictures is the bottom of the PCB. This example is further modified with an additional EPROM so I'm not even sure it would work with a Honeywell terminal if I had one. I will propabably interface with the primary controller on the PCB or replace it.
Spoiler:
SD3.jpg
SD3.jpg (385.52 KiB) Viewed 19258 times

User avatar
Muirium
µ

08 May 2021, 17:15

So… it works now? With the original circuitry intact?

I remember talking to Haata about converting mine but he said it'd need to be destructive. The controller is really bad: not even true 2KRO, depending on the keys if I recall.

User avatar
Polecat

18 May 2021, 04:51

Industrial gray Monterey K104. Long story, but I had been looking for one of these for thirty years after owning a badly and unevenly yellowed one in the early '90s. Big thanks to the generous person here who spotted this one and let me have first shot at it. It's very dirty inside and out, but no yellowing, and the (early white Alps SKCM) switches still feel decent. Doubleshot light/dark gray caps, with no shine and no yellowing. I went over my usual $50 limit to get this one, but no regrets, I can't wait to start restoring it.
Attachments
IMG_8139.JPG
IMG_8139.JPG (1.42 MiB) Viewed 18867 times
IMG_8142.JPG
IMG_8142.JPG (1.51 MiB) Viewed 18867 times

User avatar
Muirium
µ

18 May 2021, 11:55

Nice colourway. A board like that would have caught my eye 30 years ago, too. (And maybe got me into keyboards earlier… and cheaper… note to self: still waiting on that time machine.)

Good luck with the restoration!

John Doe

21 May 2021, 11:10

:D :D
Last edited by John Doe on 06 Sep 2021, 18:10, edited 2 times in total.

Post Reply

Return to “News”