This is a Group Buy for Phantom plates (DXFs are here, bottom of page)
First of all, a big thank you to scottc for starting his IC and getting me off my ass to start this!
All layouts will be available (ANSI125, ANSI150, ISO125, ISO150, 7bit)
Materials are 304 stainless, or aluminium 1050 series.
Finish is satin/matte-ish on the top (there will be some blemishes), bottom will be brushed for deburring.
Prices will be: 15€ for aluminium and 20€ for steel.
Depending on the specifics of the order, we might get a slightly better price but don't hold your breath.
To order, PM me with "Phantom GB" in the subject and the message something like the following format:
Code: Select all
Username Paypal email (if you need SEPA just write SEPA!) Full address (including name) qt material layout a bbbbb cccccc 1 steel ANSI125 . ..... ........ x yyyyy zzzzzzz
The steel plate (ANSI125) weighs in at 270g and the aluminium (ISO150) at 100g.
Keep in mind that the aluminium ones will need reinforcement for shipping (unless bought together with a steel one) so add a minimum of 150-200g to the weight.
(As a rough guide, shipping to Europe up to 500g is 8.40€ and up to 1kg 11.20€, rest of the world 9.20€ and 15€ respectively)
Payment via Paypal (fees on you) or -if necessary- SEPA (my bank has a 4€ fee for incoming payments, so I'll have to pass it on you.)
Taking orders until 7/6/2015 Orders closed
Invoicing and payments from 7/6/2015 All orders paid.
Manufacturing approx. 7-10 days
Shipping will start as soon as I have the plates on hand.ALL SHIPPED
Register your interest in your order and we'll see.
If we can't do it this time, I am open for a 60% GB at a later date.
PPS: If you have any suggestions fire away!