deskthority

Khers wrote: ↑I'll take whatever lowest number that is left.

5 is yours

I would take #06.

hypkx wrote: ↑I would take #06.

It is yours.

9 and 23 please...

lot_lizard wrote: ↑9 and 23 please...

yours

(repeated) Based on this post, I have numbered the PCBs.

Post the PCB number that you want to have or that you need in this tread.

The table with the PCB allocation has been added to the first post of the GB

The process is FIFO

So I am having my friends at a machine shop make a door flap (plastic) replacement (stainless steel) for my 3279 beamspring. On Tuesday, I pick it up. I am going to ask about having a thicker gauge stainless steel baseplate cut and bent for the FSSK (say twice as thick). I would drill and countersink the holes myself using one of my presses, and would likely have mine either painted or powder coated afterwards. I already ordered two replacement frames from Unicomp, and the hope is that I can use my 2 FSSK's as drop in full replacements (without having to even touch the other bolt mods). If others have interest in the 2X thick back plates, let me know, and I can ask about bulk builds (keep in mind this is artistic work... Not China). I$... Yours is pro bono... Just send me your address

I'll take whatever lowest number is still available.

Halvar wrote: ↑I'll take whatever lowest number is still available.

Your will be the #08

lot_lizard wrote: ↑So I am having my friends at a machine shop make a door flap (plastic) replacement (stainless steel) for my 3279 beamspring. On Tuesday, I pick it up. I am going to ask about having a thicker gauge stainless steel baseplate cut and bent for the FSSK (say twice as thick). I would drill and countersink the holes myself using one of my presses, and would likely have mine either painted or powder coated afterwards. I already ordered two replacement frames from Unicomp, and the hope is that I can use my 2 FSSK's as drop in full replacements (without having to even touch the other bolt mods). If others have interest in the 2X thick back plates, let me know, and I can ask about bulk builds (keep in mind this is artistic work... Not China). I$... Yours is pro bono... Just send me your address

Guau ! I will PM you.

Next in line is number #10, and I think I like it, so sign me up for it please.

alh84001 wrote: ↑Next in line is number #10, and I think I like it, so sign me up for it please.

You will receive the FSSK PCB v1.00 #10

Well, let's take #11.

idollar wrote: ↑DO NOT USE THE RUBBER MATE ! The bigger size of the F flippers makes them more difficult to flip. Moreover, when they flip the do not do it all the way to the board, some of them stay in the middle as the mate is strong enough to hold them.

Dumb question: what is that rubber mate you're talking about? The one between the PCB and the back plate?

ramnes wrote: ↑

idollar wrote: ↑DO NOT USE THE RUBBER MATE ! The bigger size of the F flippers makes them more difficult to flip. Moreover, when they flip the do not do it all the way to the board, some of them stay in the middle as the mate is strong enough to hold them.

Dumb question: what is that rubber mate you're talking about? The one between the PCB and the back plate?

I will explain it with lot of details in the "Users Manual Thread".
A quick answer is: with the FSSK 0001 (prototype) I used the rubber mate between the flippers and the M membrane between the F flippers and the PCB. This worked. The rubber mate in the second FSSK was different and would not allow the set to work if in used. As soon as it was removed the keyboard worked as a dream. It took me more than 10 tries to find this out.

#17 please We were working out a trade, but I'm good with just buying if you'd rather go that route. Thanks!

orihalcon wrote: ↑#17 please We were working out a trade, but I'm good with just buying if you'd rather go that route. Thanks!

I think that I PM you stating that trading is fine with me.

orihalcon wrote: ↑#17 please We were working out a trade, but I'm good with just buying if you'd rather go that route. Thanks!

#17 will be yours.

Is the #12 still available? If so, I'll take it !

If we leave out the rubber mat, does that mean we should put tape on the back plate to keep it electrically neutral?

Techno Trousers wrote: ↑If we leave out the rubber mat, does that mean we should put tape on the back plate to keep it electrically neutral?

No, there is no need to put anything in the middle

Peter of A. wrote: ↑Is the #12 still available? If so, I'll take it !

Please refer to the PM that I have sent you

I want #23 if possible

//edit

aah fuck, realized its not available anymore. then #25

snoopy wrote: ↑I want #23 if possible

//edit

aah fuck, realized its not available anymore. then #25

25 is yours

I'll take the lowest number available.

Thanks i$!

Lurch wrote: ↑I'll take the lowest number available.

Thanks i$!

Yours will be 11. And you know what they say about this number:

There are 11 types of people: the ones that can read 11, the ones that cannot and the ones that do not understand this sentence.

In reality the phrase applies with 10, I just had to adapt it a little BIT

I asked #11 first!

ramnes wrote: ↑I asked #11 first!

Apologies ramnes, you are correct (we said FIFO) . I missed your post.

Lurch,

Yours will be the #12

I do not need a special number. Thanks.

No preference for a number. Will take what ever is left.

Thanks.