WTS EU-UK cherry dyesub sad, M0116

ntv242ver2

27 Jan 2021, 23:59

Hi,

Looking to sell some more boards to consolidate my stuffs. This goes for everything: these are old stuffs, I tried my best to describe the condition of each item with my best ability but it is possible that I might miss some wear and tear.



1- M0116 with salmon
Price: 75 gbp
Salmon switches, they are in great condition and i lubed the sliding rails of the top housing with a light coat of OKS 477. Since salmon was not lubed to begin with, I think this up the switch a notch. PCB has two bridging, not done by me, came to me that way. Tested and the whole board is working fine except the = on the numpad.

Image
Spoiler:
Image
Image
Image
Og cherry dyesub SAD
Price: 95 gbp
Desc: very good condition set, just a bit dusty
Image





Spoiler:
Looking to sell this board, some yellowing on the case and caps, switches were cleaned and lubed with dry lube, 7.5 to 8 imo, i have not looked into converted it yet, a soarer might do the job
Asking for 170 eur+ shippingImage
Image

4- Focus FK2000plus - 75GBP: pine white alps, good cond, some deformed caps for unknown reason, does not affect function at all
Spoiler:
Image
Image
Image
Image
1- GH80-1800 - 135 GBP : The start of this project was that i have a g81 case + caps i like to save. It was in ansi layout, so in order to make it iso i have to add some other caps i have around. Some heavy marks on some caps, can be a bother i understand, but the reason i tried to save them was that the main caps are in good condition no shine no yellow. Built with JWK jwick red switches, linear, bottoming out 60g, Filmed and lubed with kryptox 205(on housing) and 105 (on spring). Durock stabs + one cherry stab for the + on the numpad. PCB is GH-1800 by Maartenwut fuly porogrammable + PC plate. The case is a g81 case painted over with metal gun color, to accommodate the addition of the plate it has to be modded. OG double shot caps as mentioned, the remaining ansi caps will be included as well since i have no use of them other wise.
Spoiler:
Image
Image
Image
Image
Image
2- Filco - 50 GBP: with xiangmin switch, in pristine condition when it came to me and has been kept like that ever since. Switches are smooth, a tat heavy for my taste. Use Ps2 protocol
Spoiler:
Image
Image
Image
Price: 45 gbp or $60
Toshiba alps caps, a t1200 module i belive, i bought the module alone so not sure about the whole thing. Good condition caps
Image
Image
Image

1- m0110a - 60 GBP
This has mitsumi standard mechanical switches type 1. Switches are good, this board has been usb converted, even tho the converter is very home made ish XD.
IT came to me without the stabs for the spacebar, missing one cap (up arrow), and the screws for the case. Therefore i had to improvise new stabs wires and inserts using parts from a cherry my keyboard. The spacebar works totally fine. New screws were provided as can be seen from the pic of the bottom. A replacement cap was bought, unfortunately it is off color. Last but not least importance: please see the current layout of the keyboard in the pic below
Image
Spoiler:
Image
Image
Image
Image
2- mck 860 with blue alps - 90GBP
I bought this as the restoration work of someone else. I think he did a decent job of lubing the switches, painting the plate. He sanded the case to rid off the yellow, which i dont really agree with. Cable was worked on the reduce the original length. The keyboard works fine, switches are decent however they are a bit muted and not to my liking. Caps are decently thick but printed. Overall im not using this one much and it is just redundant in my cave.
Image
Spoiler:
Image
Image
Image
G80 - 0427/ 0624 or "That OG NCR XT keyboard" - 150 GBP + shipping

board speaks xt, tested with soarer all keys registered. Be mindful that nav cluster via soarer dont give the right inputs (number instead of nav keys) but the rest works just fine. Converter is not included. One screw was broken, doesnt affect anything tho.

Image
Image
Image
Image

1- Acer kb102a with salmon, DE layout
Price: 85 gbp
I bought chassis, caps, pcb, and plate from another member in DT. I revived this board with SKCM salmon. Swiches were cleaned and lubed on the sliding rails with OKS477. I rate them 7.5. Since buying the chassis second hand, there are some discoloring, chips on the board. Feet and screws were missing, and i was able to find only a few that can be used to screw plastic. All and all, i think those are just minor issues really the board is still solid. Also the caps were not original, no idea what board it was from.
Image
Spoiler:
Image
Image
Image
4- HHKB
Price: 100 gbp
Bought like new condition in box, and and used for like 2 minutes until i put it away ever since. Topre is not for me.
Image

6- Duck viper V3
Dunno if DT is of interest for this, but i have a duck viper V3 built with mauve lubed filmed, fr4 plate + 2 extra plates for sale. OG cherry wob keycaps from a 1800 + space from other set.
Price: 380 gbp with caps, 340 without
Image
Image
Image

SOLD
Last edited by ntv242ver2 on 04 Jul 2021, 10:13, edited 39 times in total.

User avatar
KeebMeUp

28 Jan 2021, 19:02

Lmao no thanks i'd rather buy 10 chinese keyboards than buy from you nam

ntv242ver2

28 Jan 2021, 19:18

KeebMeUp wrote:
28 Jan 2021, 19:02
Lmao no thanks i'd rather buy 10 chinese keyboards than buy from you nam
Dont worry andj, wont be selling to you even if you offer 10x what i am asking

User avatar
KeebMeUp

28 Jan 2021, 19:22

ntv242ver2 wrote:
28 Jan 2021, 19:18
Dont worry andj, wont be selling to you even if you offer 10x what i am asking
:lol: :lol:

User avatar
Myoth

28 Jan 2021, 19:38

KeebMeUp wrote:
28 Jan 2021, 19:02
Lmao no thanks i'd rather buy 10 chinese keyboards than buy from you nam
why are you throwing shade ?

User avatar
KeebMeUp

28 Jan 2021, 20:35

Myoth wrote:
28 Jan 2021, 19:38
why are you throwing shade ?
viewtopic.php?f=50&t=25081
ntv242ver2 wrote:
02 Jan 2021, 22:26
Lmao no thanks i rather buy 100 chinese deskmat than buying from you andj
Just returning the favor Louis!

User avatar
zrrion

28 Jan 2021, 21:37

looks clean, GLWS

ntv242ver2

29 Jan 2021, 09:57

zrrion wrote:
28 Jan 2021, 21:37
looks clean, GLWS
Thanks man 🙏

User avatar
ZacAndCheese

30 Jan 2021, 01:48

My Hi-Tek 725 variant is cooler...

Just kidding. Good luck with the sale, looks like it's in pretty good condition too!

Sturmtiger001

30 Jan 2021, 03:43

GLWS looks fantastic.

ntv242ver2

30 Jan 2021, 11:51

Cheers guys, bump

kelvinhall05

05 Feb 2021, 18:25

Nice board except for 1u backspace glws

ntv242ver2

05 Feb 2021, 18:51

kelvinhall05 wrote:
05 Feb 2021, 18:25
Nice board except for 1u backspace glws
Cheers mate, sold now forgot to update

ntv242ver2

02 Mar 2021, 12:11

Update and pump

ntv242ver2

05 Mar 2021, 08:26

Bump

User avatar
Go-Kart

05 Mar 2021, 10:41

PM'd

User avatar
doomsday_device

05 Mar 2021, 22:27

damn that gh1800 looks prestine. glws

ntv242ver2

06 Mar 2021, 13:57

doomsday_device wrote:
05 Mar 2021, 22:27
damn that gh1800 looks prestine. glws
Thanks doom ^^

ntv242ver2

09 Apr 2021, 12:44

Bump

User avatar
UnscrambledEggs

09 Apr 2021, 22:45

Quite a looker with that condition and those colours! :D GLWS nam!

ntv242ver2

13 Apr 2021, 10:25

Add more items
UnscrambledEggs wrote:
09 Apr 2021, 22:45
Quite a looker with that condition and those colours! :D GLWS nam!
Thanks you XD indeed the toshiba caps was sold
Last edited by ntv242ver2 on 13 Apr 2021, 15:04, edited 1 time in total.

User avatar
Palatino

13 Apr 2021, 10:55

Pmed

ntv242ver2

19 Apr 2021, 21:19

Up.

ntv242ver2

01 May 2021, 15:37

Add more items

ntv242ver2

18 Jun 2021, 10:11

Add more item

ntv242ver2

21 Jun 2021, 11:12

More stuffs to sell, bump

User avatar
Wodan
ISO Advocate

21 Jun 2021, 13:48

PMd for hhkb

zippolupan

21 Jun 2021, 18:21

What are the switches on the Wyse 60?

ntv242ver2

21 Jun 2021, 19:15

zippolupan wrote:
21 Jun 2021, 18:21
What are the switches on the Wyse 60?
cherry mx black. Vintage ones, if you care about that sort of stuff XD

ntv242ver2

04 Jul 2021, 10:13

Up add more stuffs

Post Reply

Return to “For sale”