Datacomp DFK 192 - pine ALPS SKCM white

[ghostdawg187]

I want to sell a Datacomp DFK 192 with pine ALPS SKCM white switches. I have lost interest in restoring this board. I already have another Datacomp DFK 192 with SMK 2nd gen. clicky switches with ALPS mount. For the condition of the board I refer to the pictures. I have also made a picture of the inside of the switch. The switches are dusty, but can probably restored by cleaning them in a ultrasonic cleaner, which I do not possess. Moreover, the cable is faulty. You need to repair the cable, but the board itself is fully working since I have tested it with the cable from the other Datacomp board I have. I have already started to clean the switches in the F-row. I also experimented on lubing the switches with PTFE dry lube, but I am not satisfied with the result, because I like the SMK switches more and I cannot get used to white ALPS switches. I have cleaned the case and the keycaps. On removing the "+"-keycap from the numpad it got broken and I have glued the pieces. Please check the pictures for the result.

I am asking 25 Euros plus shipping.

20190721_144402.jpg (1.63 MiB) Viewed 1573 times

20190721_144648.jpg (1.7 MiB) Viewed 1573 times

20190721_145013.jpg (1.28 MiB) Viewed 1573 times

20190721_144932.jpg (1.95 MiB) Viewed 1573 times

20190721_144707.jpg (1.3 MiB) Viewed 1573 times

20190721_144658.jpg (1.71 MiB) Viewed 1573 times

20190721_144454.jpg (1.55 MiB) Viewed 1573 times

20190721_144433.jpg (1.68 MiB) Viewed 1573 times

20190721_144350.jpg (2.22 MiB) Viewed 1573 times

For the cable repair I have already started another thread where I have received very helpful answers. Please check it out here:

viewtopic.php?f=56&t=22236

[ghostdawg187]

Sold!