[SOLD] FREE YMDK Melody 96 v1 PCB (ANSI layout) w. plate, switches
Posted: 31 Jul 2022, 18:47
After upgrading my Melody 96 with a new v3 hotswap PCB, I am selling the old PCB complete with grey plate, soldered Gateron yellow switches, stabilizers and orange LEDs.
The board features the ANSI layout B, you can see on this page:
https://ymdkey.com/products/kit-1-alumi ... yboard-kit
The firmware is VIA compatible.
The board and switches are working fine. I actually used this a my daily driver for about two years.
A few caveats that I am factoring into the price:
Free if you pay for shipping
The board features the ANSI layout B, you can see on this page:
https://ymdkey.com/products/kit-1-alumi ... yboard-kit
The firmware is VIA compatible.
The board and switches are working fine. I actually used this a my daily driver for about two years.
Spoiler:
- Neither the switches nor the stabilizers are lubed - you may want to swap the stabilizers for better ones
- The underglow RGB LEDs don't seem to work - for me this wasn't an issue as I am using an aluminium case
- All switch LEDs are working. However, two or three will "blink" on hard key presses - I will include enough spare LEDs to replace them
Free if you pay for shipping