Realforce 87u stock 55g

User avatar
phinix

22 Nov 2022, 15:06

Looking for Realforce with 55g stock domes, R1 87u.
Stock.
Last edited by phinix on 13 Jan 2023, 20:11, edited 5 times in total.

User avatar
Muirium
µ

23 Nov 2022, 14:59


User avatar
wobbled

23 Nov 2022, 17:52


User avatar
snoopy

23 Nov 2022, 20:02

For how much are used 87U R1 normally going for these days?

User avatar
phinix

26 Dec 2022, 17:57

Changed to R1 only, as I managed to buy R2.
R1 87u 55 - holy grail of topre keyboards :)
There were few of those for sale on reddit but US based and they don't want to post further to EU...

User avatar
wobbled

26 Dec 2022, 19:24

snoopy wrote:
23 Nov 2022, 20:02
For how much are used 87U R1 normally going for these days?
They are pretty expensive and hard to come by usually. I recently built two realforce 86U boards using parts from a realforce 103, realforce 91u case, a custom pcb and a steel plate I had cut for it. Surprisingly easier to do that than find an original 86u

User avatar
phinix

30 Dec 2022, 22:34

wobbled wrote:
26 Dec 2022, 19:24
snoopy wrote:
23 Nov 2022, 20:02
For how much are used 87U R1 normally going for these days?
They are pretty expensive and hard to come by usually. I recently built two realforce 86U boards using parts from a realforce 103, realforce 91u case, a custom pcb and a steel plate I had cut for it. Surprisingly easier to do that than find an original 86u
Where do you buy custom pcb?

User avatar
wobbled

31 Dec 2022, 14:52

phinix wrote:
30 Dec 2022, 22:34
wobbled wrote:
26 Dec 2022, 19:24
snoopy wrote:
23 Nov 2022, 20:02
For how much are used 87U R1 normally going for these days?
They are pretty expensive and hard to come by usually. I recently built two realforce 86U boards using parts from a realforce 103, realforce 91u case, a custom pcb and a steel plate I had cut for it. Surprisingly easier to do that than find an original 86u
Where do you buy custom pcb?
https://www.superbuy.com/en/page/buy/?u ... rt-product
I have both yellow and black versions, the yellow seems to work a bit better with OEM plate screw holes.
You could also buy a custom pcb on cipulots discord server, though the orders are a bit slower
https://discord.gg/mqyxccggf7

User avatar
Muirium
µ

31 Dec 2022, 16:59

What features does that PCB bring to the Realforce? QMK support?

davkol

31 Dec 2022, 19:54

Muirium wrote:
31 Dec 2022, 16:59
What features does that PCB bring to the Realforce? QMK support?
Are you open to suggestions for New Year's resolutions? How about this one: "I will stop to read before replying."

The product description says "via". What could that be?

If you paste the text into DeepL or Google Translator, it further clarifies: key customization (remapping) and NKRO, optional solenoid.

User avatar
Muirium
µ

31 Dec 2022, 20:40

What, and miss out on the wind up? ;)

Does the ML-a-majig say if it's QMK or some proprietary firmware? Don't know enough about VIA to know if it only runs on (and therefore means) QMK. Only bare QMK is tempting for me. VIA and VIAL not so much.

User avatar
wobbled

31 Dec 2022, 23:28

I don’t know anything about firmware but I do know it runs on via.
I bought it to create a realforce 86u, I suppose you could upgrade an old 86u if you had one to enable key remappings, but if you do then sell me your old PCB 😂 i destroyed realforce 101/3s and 91us just to get a black and white 86u

User avatar
Scarpia

01 Jan 2023, 21:18

Out of curiosity, how would I check if my Realforce is an R1 model?

User avatar
wobbled

01 Jan 2023, 22:10

Scarpia wrote:
01 Jan 2023, 21:18
Out of curiosity, how would I check if my Realforce is an R1 model?
The R1 has an extended top lip with the realforce logo on the top left.
The R2 edges sit pretty close to the edges of the keycaps and the logo is on the top right side.
Here is a comparison video
https://youtu.be/tPybhEY1KHs

User avatar
Scarpia

02 Jan 2023, 18:08

Cool, I have the R1 then. I’m currently using it as a daily driver though :-/ …but only because it’s quieter than my Model F, my SSKs, and my SKCM Brown Alps TKL, all of which I would rather use. But I share my office with my partner and the WAF is unfortunately really low on those boards.

But I’m hoping to build a quieter custom board in 2023 and once I have something to replace it with I promise to put the Realforce for sale here.

User avatar
Scarpia

02 Jan 2023, 18:17

Btw there’s one on MechMarket for $175: https://www.reddit.com/r/mechmarket/com ... rds_etc_w/

User avatar
wobbled

02 Jan 2023, 18:52

Scarpia wrote:
02 Jan 2023, 18:17
Btw there’s one on MechMarket for $175: https://www.reddit.com/r/mechmarket/com ... rds_etc_w/
Good price but that one is black, OP wants white which seem a bit harder to find

User avatar
phinix

04 Jan 2023, 01:28

Scarpia wrote:
02 Jan 2023, 18:17
Btw there’s one on MechMarket for $175: https://www.reddit.com/r/mechmarket/com ... rds_etc_w/
Yeah, that one sounds heavily modded plus some rust issues, I want to grab a stock one, no lubing, no modding.

User avatar
phinix

13 Jan 2023, 20:21

Problem with those R1 87u55 keyboards is that they come up for sale only in US for $150-200, but they do not want to post to Europe.
Or if you find one, posting is $100... :(
Its all on reddit and I do not trust those people.

User avatar
Scarpia

08 Feb 2023, 12:51

Good news! I’m sending you a PM

Post Reply

Return to “Want to buy”