Red Scarf III backplate modification

hypkx
Chasing the Dream

04 Feb 2019, 21:11

I always regret not getting the 100$ more special edition of the Massdrop red scarf III, so I thought about to add a backplate myself (the only difference was the backplate). The red scarf is my favorite MX keyboard, I use it for gaming and writing all day (Gateron red). I disliked the missing weight and support of the switchplate.
I ordered the metallplate from a shop and drilled the holes myself. The plate was not the right size, 2mm to short in length (Idk how it happened, I got the size from the manual, maybe I should measured it myself or the shop cut it wrong, but in the end it isn't a big deal).
Spoiler:
IMG_20190105_112445.jpg
IMG_20190105_112445.jpg (3.72 MiB) Viewed 1070 times
IMG_20190105_133439.jpg
IMG_20190105_133439.jpg (2.69 MiB) Viewed 1070 times
IMG_20190105_153419.jpg
IMG_20190105_153419.jpg (3.64 MiB) Viewed 1070 times
IMG_20190105_153425.jpg
IMG_20190105_153425.jpg (2.95 MiB) Viewed 1070 times
IMG_20190105_153446.jpg
IMG_20190105_153446.jpg (3.05 MiB) Viewed 1070 times
IMG_20190105_153534.jpg
IMG_20190105_153534.jpg (3.06 MiB) Viewed 1070 times
IMG_20190105_153918.jpg
IMG_20190105_153918.jpg (3.51 MiB) Viewed 1070 times
IMG_20190105_185642.jpg
IMG_20190105_185642.jpg (3.43 MiB) Viewed 1070 times
IMG_20190105_185658.jpg
IMG_20190105_185658.jpg (3.03 MiB) Viewed 1070 times
IMG_20190105_185721.jpg
IMG_20190105_185721.jpg (3.62 MiB) Viewed 1070 times
IMG_20190105_185734.jpg
IMG_20190105_185734.jpg (4.03 MiB) Viewed 1070 times
IMG_20190105_190155.jpg
IMG_20190105_190155.jpg (2.97 MiB) Viewed 1070 times
IMG_20190105_190222.jpg
IMG_20190105_190222.jpg (2.87 MiB) Viewed 1070 times
IMG_20190105_190152.jpg
IMG_20190105_190152.jpg (2.97 MiB) Viewed 1070 times

andrewjoy

05 Feb 2019, 15:54

That looks like a very sturdy backplate !

Post Reply

Return to “Gallery”