DIY Project - ?

User avatar
CeeSA

16 May 2013, 23:21

Do you know what this is?
1.jpg
1.jpg (142.2 KiB) Viewed 5269 times
Spoiler:
2.jpg
2.jpg (87.87 KiB) Viewed 5269 times
Spoiler:
3.jpg
3.jpg (92.5 KiB) Viewed 5269 times
Spoiler:
4.jpg
4.jpg (97.68 KiB) Viewed 5269 times
This is some unfinished, the last step follows.

User avatar
Mrinterface

16 May 2013, 23:24

Boobies?

User avatar
Acanthophis

16 May 2013, 23:25

At least two individual ballons sticked together, stuffed with some sort of filling (sand, etc.).
Selfmade cushions? Wrist rests maybe?

Oh and yes, boobies. Almost forgot.

User avatar
webwit
Wild Duck

16 May 2013, 23:26

I thought of a joke which compared these to Angelina Jolie's former glories, but then I decided that would be in bad taste.

mintberryminuscrunch

16 May 2013, 23:28

webwit wrote:I thought of a joke which compared these to Angelina Jolie's former glories, but then I decided that would be in bad taste.
Good that you managed to hold it in ^^

Findecanor

16 May 2013, 23:56

I think that the "balls" could be made of plaster. Red and blue paint is used as a kind of primer for the silved top coat.
The scratched holes in the paint is for testing the paint's endurance... which is apparently not very good.

User avatar
GH1391401

17 May 2013, 05:48

two balloons

User avatar
TheSoulhunter

17 May 2013, 06:00

A new DIY key-switch that deserves the title "cloud of boobs"?

mintberryminuscrunch

17 May 2013, 06:26

Balloons dipped in nail polish.
Some one on geekhack will pay tons of cash for it!

User avatar
ne0phyte
Toast.

17 May 2013, 09:06

Mrinterface wrote:Boobies?

BOOOOOOOBIIEEEESSSS!
This! DIY anti-stress boobs.
Slightly NSFW
Spoiler:
Image
Image
Image

User avatar
CeeSA

17 May 2013, 09:24

Acanthophis is abolutely right.

I took 2 ballons filled with bird sand. The ballons was sold as "metallic" color. For the filling I used bird sand.
But I filter the sand to get out some bigger sharp pieces.

The blue boobs weigh 340gr each, the silver ones 250gr.

I tried this because I like more firmer wrist rets.
b_wris_rests.jpg
b_wris_rests.jpg (146.89 KiB) Viewed 5193 times

katamari

17 May 2013, 10:06

Instead of showing off your hand made sex toys, you should better make a how to on inserting a trackpoint in a tipro :o

User avatar
Gilgam

17 May 2013, 10:57

Trackpoint is just there. :mrgreen:

User avatar
CeeSA

17 May 2013, 11:25

katamari wrote:Instead of showing off your hand made sex toys, you should better make a how to on inserting a trackpoint in a tipro :o
you could find helpful pics here:
http://deskthority.net/photos-videos-f8 ... Trackpoint

User avatar
Icarium

22 May 2013, 11:56

katamari wrote:Instead of showing off your hand made sex toys, you should better make a how to on inserting a trackpoint in a tipro :o
ITYM clit-mouse

User avatar
Minskleip

11 Jun 2013, 13:48

Pretty neat keyboard arrangement! Do you have a custom cable or don't you do left->right and right->left communication?

User avatar
CeeSA

11 Jun 2013, 15:28

Yes, I extend the internal Tipro Bus Cable and exported from one housing to the other.
So I am able to use one controller for this setup.

User avatar
Minskleip

12 Jun 2013, 08:16

Did you do it properly, with stress relief? How is it it to type with such a large width?

User avatar
CeeSA

12 Jun 2013, 08:46

Yes with stress relief with cable ties.

The large width feels very comfortable, more relaxed. My arms are stored on the armrests. My wrists rests on the boobs. Actually there is about 8 cm more space between the boards, as can be seen in the picture.

User avatar
Minskleip

12 Jun 2013, 09:44

Thanks. Quite interesting with the nipple too.

Post Reply

Return to “Gallery”