The Kuritakey Brand M0116/M0118/IIgs Keyboard Rejuvenation PCBs

User avatar
soyuz

30 Sep 2021, 13:16

Here we are again - the quest to stamp out hard 2KRO continues. Next after this is the IIgs keyboard, then the M0110.

Status
PCB still in development - prototyping after Chinese holidays and M0110A PCB prototyping is completed.

Features

M0116 PCB
  • M0116 layout only
  • Pro Micro as MCU - cheap and cheerful!
  • N-Key Rollover - through hole or surface-mount diodes
  • Preserves keyboard appearance with some smart cable chopping and re-use of the original ADB daughterboards
  • Plug in your S-Video to USB cable either side!
  • QMK and VIA firmware
M0118 PCB
  • All of the above, with the following changes
  • Teensy 2.0 or Pi Pico MCU (too many matrix positions for Pro Micro. still working on Pico placement so it's accessible through the plate cutout)
  • Support for additional matrix positions brings support for layout mods!
  • Supported layout mods: 2.25u Right Shift, Split numpad 0, Replace 3x bottom row arrow keys with 2x 1.5u keys
  • QMK and VIA firmware (Pro Micro only for now, Pi Pico will use KMK until QMK is ported)
Still to do
- Fully confirm daughterboard footprint locations
- Potentially optionally support M0116 layout on M0118 PCB
- Pi Pico placement on M0118 PCB

Pictures
Please ignore 3d models of pin headers, KiCad spams those out and I can't be bothered to remove them
M0116 front
M0116 front
kicad_2QFidkPgCL.png (72.29 KiB) Viewed 704 times
M0116 back
M0116 back
kicad_RwWjrwgmwY.png (118.95 KiB) Viewed 704 times
M0118 front
M0118 front
kicad_0bdFygLbYp.png (55.56 KiB) Viewed 704 times
M0118 back
M0118 back
kicad_izEGO0Uxws.png (90.39 KiB) Viewed 704 times
Fun
These PCBs are designed to be unobtrusive as possible! It will ship in classic green and carries faithful rear markings copied from the original PCB. Modern markings kept to a tasteful minimum.
kicad_YPNX5WRhQq.png
kicad_YPNX5WRhQq.png (26.92 KiB) Viewed 704 times
kicad_lESs9JORUP.png
kicad_lESs9JORUP.png (26.9 KiB) Viewed 704 times
Last edited by soyuz on 09 Oct 2021, 23:29, edited 2 times in total.

User avatar
TNT

30 Sep 2021, 13:49

Hell yeah, count me in again :D

User avatar
soyuz

30 Sep 2021, 20:22

Added bonus: PCB for the IIgs board (same features as M0116 pcb)
Attachments
kicad_D4cssdUe5m.png
kicad_D4cssdUe5m.png (57.62 KiB) Viewed 624 times
kicad_Tjx41mvDGT.png
kicad_Tjx41mvDGT.png (92.63 KiB) Viewed 624 times
kicad_TADncZfXEg.png
kicad_TADncZfXEg.png (68.21 KiB) Viewed 624 times

Ggr8

19 Oct 2021, 20:39

Looks very interesting! Want!

Post Reply

Return to “Workshop”