Teensy -> Pro Micro Pinout

User avatar

04 Sep 2019, 21:25

Hey guys! I'm working on using QMK to convert my 5291 using a Pro Micro

https://github.com/qmk/qmk_firmware/tre ... r/ibm_5291

What is the equivalent pinout?


05 Sep 2019, 04:25

The Pro Micro's pin-out is in the Wiki.
However, it does not expose the PB0 pin so you would have to modify your firmware to use another one.

... or modify your Pro Micro. PB0 is used for the yellow LED. The other side of the LED is connected to Vcc, so the LED might need to be removed and that could be tricky...

BTW, the Pro Micro-clone "Elite-C" exposes the PB0 pin instead of the RAW pin, so you could use that in case you have one lying around. It is otherwise about as costly as the Teensy 2.0 and out of stock pretty much everywhere.

Post Reply

Return to “Workshop”