Page 1 of 2
flowerlandfilms ELH-38 (Yellow Alps)
Posted: 08 Sep 2019, 19:55
by flowerlandfilms
I need a board for my Maya hotkeys while 3D Modelling, so I've come up with this.
It will be a companion piece for my SGI AT-101, so I will be using its profile as a template.
It uses Yellow Alps and the case will be made of wood, here is the Quentin Blake bar napkin design.
- quentin blake napkin.png (570.91 KiB) Viewed 7928 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 08 Sep 2019, 20:15
by Muirium
Too much colouring in. Not enough legends!
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 08 Sep 2019, 20:58
by flowerlandfilms
Muirium wrote: ↑08 Sep 2019, 20:15
Too much colouring in. Not enough legends!
The caps I'll be using will be harvested and repurposed from my old editing keyboards, the legends won't be what I need, but I have a plan for that, hehe.
- IMG_20190720_165702.jpg (2.91 MiB) Viewed 7894 times
In the meantime, it's off to the exotic Wood store to choose a material.
- IMG_20190809_082300.jpg (3.88 MiB) Viewed 7894 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 08 Sep 2019, 21:02
by flowerlandfilms
- layoutpng.png (56.17 KiB) Viewed 7890 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 09 Sep 2019, 01:20
by flowerlandfilms
The two big pieces are Congolese Mahogany, this will be our build material.
- IMG_20190809_093030.jpg (4.67 MiB) Viewed 7852 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 09 Sep 2019, 13:54
by flowerlandfilms
Let's get to work!
- IMG_20190810_083521.jpg (2.76 MiB) Viewed 7798 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 09 Sep 2019, 14:56
by flowerlandfilms
- IMG_20190810_093308.jpg (2.97 MiB) Viewed 7786 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 09 Sep 2019, 16:50
by flowerlandfilms
- IMG_20190810_104658_1.jpg (2.8 MiB) Viewed 7765 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 09 Sep 2019, 17:51
by flowerlandfilms
I'll be taking the steel plate from a dissected editing console. This corner chunk is all I need.
- IMG_20190804_191659.jpg (3.22 MiB) Viewed 7747 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 09 Sep 2019, 18:52
by flowerlandfilms
Got the shape, just need to make some slices.
- IMG_20190810_104849.jpg (3.42 MiB) Viewed 7726 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 09 Sep 2019, 19:13
by flowerlandfilms
- IMG_20190810_113023.jpg (3.73 MiB) Viewed 7715 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 09 Sep 2019, 19:21
by flowerlandfilms
Figuring out the needed width.
- IMG_20190810_122242.jpg (3.29 MiB) Viewed 7710 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 09 Sep 2019, 19:39
by flowerlandfilms
Filling in the other pieces.
- IMG_20190810_123245.jpg (2.63 MiB) Viewed 7697 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 09 Sep 2019, 21:08
by //gainsborough
Yo this project is sick!! Keep the updates coming!
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 09 Sep 2019, 22:11
by CountNoctua
This project and that exotic wood shop pic (mmm, bloodwood) makes me wish I knew how to woodwork. And Alpsy!
Always been a Roald Dahl fan, so I love that Quentin Blake-style napkin design, too.
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 09 Sep 2019, 23:00
by flowerlandfilms
//gainsborough wrote: ↑09 Sep 2019, 21:08
Yo this project is sick!! Keep the updates coming!
Hoping to have it done, at least physically in the next couple of days.
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 09 Sep 2019, 23:01
by flowerlandfilms
CountNoctua wrote: ↑09 Sep 2019, 22:11
This project and that exotic wood shop pic (mmm, bloodwood) makes me wish I knew how to woodwork. And Alpsy!
Always been a Roald Dahl fan, so I love that Quentin Blake-style napkin design, too.
To be clear, my woodworking skills could use some finesse, but I'm trying to get better. That is my favourite store though, the endless possibilities of things that can be made.
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 09 Sep 2019, 23:05
by flowerlandfilms
I wish I had a proper bench grinder, but I blew all my money on the wood and a scroll saw.
- IMG_20190811_142820.jpg (2.97 MiB) Viewed 7632 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 09 Sep 2019, 23:54
by flowerlandfilms
- IMG_20190811_152211.jpg (3.18 MiB) Viewed 7613 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 10 Sep 2019, 00:56
by flowerlandfilms
Sponsored by Kincrome!
- IMG_20190812_083009.jpg (2.96 MiB) Viewed 7593 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 10 Sep 2019, 14:10
by flowerlandfilms
Okay got the basic shape of the wood done!
I'm going to sand it to 1200 Grit, then Danish Oil.
I think it will come up real nice.
- IMG_20190816_171308.jpg (3.16 MiB) Viewed 7542 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 10 Sep 2019, 18:57
by flowerlandfilms
Great colour and grain coming out, here it is with the plate attached.
- IMG_20190825_192042.jpg (3.41 MiB) Viewed 7521 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 10 Sep 2019, 19:00
by flowerlandfilms
Made some mistakes with the pine dowells showing through the wood, I didn't realise the sanding would take off so much material but oh well.
Here it is with switches.
- IMG_20190825_193110.jpg (4.31 MiB) Viewed 7516 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 10 Sep 2019, 19:02
by flowerlandfilms
And here it is viewed from the bottom.
The switch plate is suspended with small wood screws.
- IMG_20190825_193244.jpg (4.17 MiB) Viewed 7514 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 10 Sep 2019, 19:51
by //gainsborough
It’s coming together! Looking neat so far!!
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 10 Sep 2019, 20:05
by flowerlandfilms
//gainsborough wrote: ↑10 Sep 2019, 19:51
It’s coming together! Looking neat so far!!
Thanks, it's looking okay, looks even better with keycaps! [Legends to change]
- IMG_20190826_164841.jpg (3.2 MiB) Viewed 7498 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 10 Sep 2019, 20:22
by flowerlandfilms
I don't want red LEDs like some of these yellows come with, I want green, so I ordered some replacement square LEDs online. For the the switches that have no LEDs like this one, I just had to make two holes with a small push pin.
- IMG_20190911_042112.jpg (3.22 MiB) Viewed 7490 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 10 Sep 2019, 21:13
by flowerlandfilms
These editing keycaps are quite plentiful, so modifying them a bit is no huge crime. Pad printed, so I've found a light go with 600 Grit is enough to take off the lettering, without leaving striations on the surface. Plus it leaves a smooth canvas to put my new legends on. I'm using Avery clear label sheets, printing them out on a laser printer, this is a test on the blue ones and I like the way it looks.
- IMG_20190830_001151.jpg (2.99 MiB) Viewed 7463 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 10 Sep 2019, 21:42
by flowerlandfilms
Teensy wiring half done.
- IMG_20190902_202924.jpg (3.78 MiB) Viewed 7456 times
Re: flowerlandfilms ELH-38 (Yellow Alps)
Posted: 10 Sep 2019, 22:46
by flowerlandfilms
Teensy wiring all done!
- IMG_20190903_004721.jpg (4.08 MiB) Viewed 7424 times