suggestions for /dev/tty2 ?

User avatar
XMIT
[ XMIT ]

09 Jan 2020, 04:06

Side print kit looks good to me!

ecliptik

12 Jan 2020, 17:01

I just stopped myself from buying a /dev/tty TKL set after finding this thread as I'd really like a MT3 profile with blanks.

Will /dev/tty2 (or any MT3 profile) come in blanks in the near future?

User avatar
depletedvespene

12 Jan 2020, 19:49

As promised, I checked out again the international kit; those are the problems I found (assuming support for German (DE), Danish (DK), Spanish (Spain) (ES), Swedish/Finnish (SE+FI), Italian (IT), Norwegian (NO) and English (UK) (UK); Spanish (Latin America), both Portuguese layouts, and other national layouts are off):
  • R1: shows up twice.
  • R1: In , the middot is a bit too low and looks like a normal dot.
  • R1: #' is used in the German layout IF the Backspace is split and the movable key is moved up from R3 to R1. This, and the \| key (for English (USA)), are the only movable keys given this option. Why not #~, '*, Ç, etcetera?
  • R1: \| (used in the Italian layout) seems to be missing, but IS present in the base kit.
  • R3: ~^ (dead key for tilde and circumflex accents) is used only in the Portuguese layouts, but neither is supported. (*)
  • Numpad comma (used in all of the supported layouts except English (UK)) is missing.
  • Don't forget the AltGr keys!

(*) With that said, given the intentional omission of tertiary legends, the Portuguese (Portugal) layout is only two keycaps shy of being fully supported: R1 «» and R3 ºª.


HTH!

User avatar
matt3o
-[°_°]-

13 Jan 2020, 11:34

depletedvespene wrote:
12 Jan 2020, 19:49
As promised, I checked out again the international kit;
thanks for your report, I'll have a look at it.

I've added two more kits. I'm still working on the japanese one, hope some nihonjin could chime in. Also the blanks are WIP
nihon-kit.png
nihon-kit.png (147.49 KiB) Viewed 385 times
bleached.png
bleached.png (152.56 KiB) Viewed 385 times

User avatar
AJM

13 Jan 2020, 19:56

I'm very happy to see the blanks kit.
That got me thinking ............ a blank Triumph kit would be fantastic and something new.

HungerMechanic

14 Jan 2020, 18:18

matt3o, can you tell me what your favourite tactiles are with PBT MT3 like dev/tty?

I've only tried it with Gateron Brown at a meetup, and even that was impressive. I also see people using it with Pro Purples, which is intriguing.

User avatar
matt3o
-[°_°]-

14 Jan 2020, 18:39

HungerMechanic wrote:
14 Jan 2020, 18:18
matt3o, can you tell me what your favourite tactiles are with PBT MT3 like dev/tty?
I usually don't like tactile switches, but generally speaking anything that is heavier than a cherry brown works for me.

User avatar
Loligagger

15 Jan 2020, 00:18

matt3o wrote:
06 Jan 2020, 16:20
Of course everything will be also available in teal mods. I had not a single request for ergodox over the past year or so... so I guess that ship has sailed. I still miss a few keys, the spacebars and some extras (being APL or the secondary legends or whatever)
No ergodox support would be too bad imo. What about just adding the necessary blank 1.5u & 2u keys to the ortho kit? There are ortho boards like the boardwalk that use those 1.5u keys too.

User avatar
Cholo

15 Jan 2020, 09:45

HungerMechanic wrote:
14 Jan 2020, 18:18
matt3o, can you tell me what your favourite tactiles are with PBT MT3 like dev/tty?

I've only tried it with Gateron Brown at a meetup, and even that was impressive. I also see people using it with Pro Purples, which is intriguing.
I like Gateron Brown, they are not the best sounding and feeling switches, but they are the best for me in terms of precision and speed when I'm typing. I use them at work.

I tried Hako Clear and Kailh Copper after that.
Hako are very silent, love the feeling but they are just a bit heavy for my taste.
Kailh Copper are nice too but they are speed switches, so they have a very short actuation force. Good for gaming (I guess...) not for typing if your are not very precise (I'm not).

I found a good compromise with Kailh brown boxed.
My new XD87 with Kailh brown boxed and Hako clear modifiers is waiting the First set arriving at home between Granite SA or /dev/tty2. :|

User avatar
Mazian

16 Jan 2020, 04:25

matt3o wrote:
08 Jan 2020, 10:49
Drop prefers to merge kits as much as possible. I understand that because of: 1) they have a vast majority of noob customers; 2) less prone to fulfillment errors.
Judging by the number of people in the first drop that accidentally bought only the alpha kit and no mods, that's a good idea.

On the other hand, there are probably a couple hundred people that still have only the alpha kit and no mods, and some of them would presumably still like to buy just a mod kit!
matt3o wrote:
08 Jan 2020, 10:49
We could also add VOL UP/DOWN/MUTE somewhere... and so on. Ideas?
I really like the WASD Keyboards media key placement on TKL and fullsize layouts, though I haven't seen it implemented on other boards.

cellonin

16 Jan 2020, 04:59

A blank white kit would be great!

User avatar
matt3o
-[°_°]-

19 Jan 2020, 11:38

okay I've updated most of the kits, there's still some work to do in the international and japanese kits, possibly the blanks too.

let me know what you think.
Attachments
spacebars.png
spacebars.png (155.15 KiB) Viewed 147 times
side-printed.png
side-printed.png (130.94 KiB) Viewed 147 times
rgb.png
rgb.png (109.16 KiB) Viewed 147 times
ortholinear.png
ortholinear.png (138.74 KiB) Viewed 147 times
numpad-triumph.png
numpad-triumph.png (79.01 KiB) Viewed 147 times
numpad.png
numpad.png (78.77 KiB) Viewed 147 times
nihon-kit.png
nihon-kit.png (148.07 KiB) Viewed 147 times
lostfound-triumph.png
lostfound-triumph.png (119.74 KiB) Viewed 147 times
lostfound.png
lostfound.png (119.49 KiB) Viewed 147 times
international.png
international.png (96.86 KiB) Viewed 147 times
extras-triumph.png
extras-triumph.png (113.15 KiB) Viewed 147 times
extras.png
extras.png (112.9 KiB) Viewed 147 times
colemak.png
colemak.png (84.28 KiB) Viewed 147 times
bleached.png
bleached.png (155.57 KiB) Viewed 147 times
base-kit-triumph.png
base-kit-triumph.png (263.77 KiB) Viewed 147 times
base-kit.png
base-kit.png (262.17 KiB) Viewed 147 times

User avatar
depletedvespene

19 Jan 2020, 11:50

I'll take a detailed look tonight, but for now things seem mostly fine. I specially dig the space bar kits.

The only thing that calls my attention is that the Bleached kit needs one R3 and one R4 1U alpha-colored keycaps. You could get away with omitting the R3 keycap (because there's two of those to replace the homing keys), but the R4 can't be omitted.

User avatar
matt3o
-[°_°]-

19 Jan 2020, 12:29

depletedvespene wrote:
19 Jan 2020, 11:50
The only thing that calls my attention is that the Bleached kit needs one R3 and one R4 1U alpha-colored keycaps. You could get away with omitting the R3 keycap (because there's two of those to replace the homing keys), but the R4 can't be omitted.
yeah my bad, one of the two 1U R4 is just light gray

User avatar
AJM

19 Jan 2020, 13:12

"Bleached" kit in Triumph color, pretty pleeeaaase. ;)

User avatar
matt3o
-[°_°]-

19 Jan 2020, 13:18

you guys are never happy...

User avatar
XMIT
[ XMIT ]

19 Jan 2020, 13:51

I'd love to see a 1.25u space bar, and have the option of space bar mods, like on a HiPro or even an AT101. I never understood why keys meant to be hit with your thumb should not be convex.

If this isn't clear, this means that I'd love for all the bottom row keys to be space bars of various widths. You're pretty close with a 2u and a 1u space bar. Just add 1.25u space bar and you're there for most boards. You'd cover even more boards with a 1.5u as well. I'd do blanks if necessary.

User avatar
matt3o
-[°_°]-

19 Jan 2020, 14:04

XMIT wrote:
19 Jan 2020, 13:51
I'd love to see a 1.25u space bar, and have the option of space bar mods, like on a HiPro or even an AT101. I never understood why keys meant to be hit with your thumb should not be convex
we'll get there eventually, it's just that I can't add too many new keys in just one drop. I've added quite a few this time.

User avatar
AJM

19 Jan 2020, 14:09

matt3o wrote:
19 Jan 2020, 13:18
you guys are never happy...
True, but a Triumph blank kit would be sooooooo much easier to produce than these Japanese or side printed kits, wouldn't it?


@XMIT:
I absolutely agree concerning a convex bottom row. Interesting suggestion with the 1.25u space bars, although the mods would look a bit weird in white.

User avatar
depletedvespene

Yesterday, 14:30

matt3o wrote:
19 Jan 2020, 13:18
you guys are never happy...
That's the core ability underneath all my job skills, and I'm damn good at it. Thank you very much. :D

User avatar
depletedvespene

Yesterday, 14:32

BTW, what about Hangul? ;)

Post Reply

Return to “Workshop”