Kompacted - hotswap 1u, hotswap rgb 2u and 6x6 per-key rgb hotswap breakable ortho board

bstiq

20 Aug 2020, 20:44

Hi guys,

I've been making some good progress on my PCBs. I figured rather than posting on the Amoeba post, I'll create my own here.

Recap and pics

Here's a recap:
- 1u hotswap (like the amoeba)
- 2u hotswap RGB
- 1u hotswap with per-key RGB in a 6x6 ortho breakable ortho board (Kompacted RGB)

First for the interested, here are some pictures !

RGB 2u:
Image
https://imgur.com/B58LiUm

1u:
Image
https://imgur.com/93KFY9X

Kompacted RGB:
Image
https://imgur.com/mmgzwzw

Now, the 1u and 2u work just like the amoeba - but the Kompacted RGB is a little bit more special

Kompacted RGB

The stories goes like this: after making four macropads, handwired with amoebas - including one with RGB, I was fed up with it.
I wanted an ortho boards with a variable size (because sometimes you want 4x4, sometimes 2x6... and so on), hotswap and RGB (using SK6812 mini-e for that sweet per-key RGB).
After doing some research, I figured none existed, so I made it.

Here's how it works...
The rows and columns:
The board is 6 by 6, spaced by 19.05mm

All the rows and columns are connected in between them.
This means you only need to connect each column and row to your microcontroller once.
There are conveniently placed Row and Col pads on each switch.

The RGB:
It uses SK6812 mini-e.
All the Ground and Vcc of the leds are connected to each other. This means you need to connect Vcc and Gnd from the microcontroller to the PCB only once.
There are Gnd and Vcc pads on each switch.

For the signals - the SK6812 mini-e take one input signal, and output a signal (for the next LED).
Each rows has the signals of the LEDs wired together.
So if you're using multiple rows, you just need to connect the output of the last led of each row, to the input of the first led of the next row. There are Din and Dout pads on each switch.

The breakaway:
This board was designed to be breakable. It can be broken down into any dimension from 1x1 to 6x6.
The Gnd, Vcc, Rows and cols, and RGB will work exactly the same.

Some examples:
Top-view of a 4x4 macropad
Image
Image

Here's what the wiring inside looks like - only for the RGB:
Image
https://imgur.com/FBK30Gv
You can see that I connected Gnd (black wire), Vcc (red wire), one IN signal from the pro micro to the first line, and then one signal from the end of each line to the next. (also a row and col on the top left... don't pay attention to that !)

Here is also a video of what it can look like:
https://www.youtube.com/watch?v=ky6atAq7jCk


Please, let me know what you think, I'm personally very excited for them.

Cheers

EDIT: can't get the pics to work, added links
Attachments
IMG_20200820_202511.jpg
IMG_20200820_202511.jpg (2.47 MiB) Viewed 172 times
IMG_20200820_202454.jpg
IMG_20200820_202454.jpg (1.26 MiB) Viewed 172 times
IMG_20200820_202449.jpg
IMG_20200820_202449.jpg (1.15 MiB) Viewed 172 times
IMG_20200820_202445.jpg
IMG_20200820_202445.jpg (1.22 MiB) Viewed 172 times
IMG_20200820_202439.jpg
IMG_20200820_202439.jpg (1.16 MiB) Viewed 172 times
IMG_20200820_203013.jpg
IMG_20200820_203013.jpg (1.21 MiB) Viewed 172 times
IMG_20200820_203655.jpg
IMG_20200820_203655.jpg (1.63 MiB) Viewed 172 times
IMG_20200820_174934.jpg
IMG_20200820_174934.jpg (486.17 KiB) Viewed 172 times

Post Reply

Return to “Workshop”