Safest way to open Alps SKCC switches?

chevy12

20 Sep 2021, 22:26

I couldn't find a tool or proven method for opening SKCC without breaking the switches on my M0110.

What would be a good guide (with photos or video) for opening SKCC?

User avatar
raoulduke-esq

20 Sep 2021, 23:15

Just to make certain... you're desoldering them first and fully removing the switch from the plate, right?

chevy12

20 Sep 2021, 23:22

Yeah, that was my plan. Is there another way about opening them without desoldering?

User avatar
raoulduke-esq

20 Sep 2021, 23:27

Here's the rub... In this image, the gray is the lower housing and the black is the upper housing. The black upper housing clips into the gray lower housing below the plate-line, so you have to have the switch out of the plate to be able to open it.
IMG_0959 copy.jpg
IMG_0959 copy.jpg (1.58 MiB) Viewed 3626 times

chevy12

20 Sep 2021, 23:42

Thanks, once I have it desoldered, how do I go about opening it? I have opened SKCM before and have some tools but this is diff.

User avatar
TNT

21 Sep 2021, 02:30

I've always just used toothpicks for my SKCM and SKCC. Worked fine for me

User avatar
raoulduke-esq

21 Sep 2021, 02:33

chevy12 wrote:
20 Sep 2021, 23:42
Thanks, once I have it desoldered, how do I go about opening it? I have opened SKCM before and have some tools but this is diff.
GENTLY lift up these flaps until the top housing is loosed on that side. Repeat on the other side. The plastic can be very brittle so be careful.
IMG_0959 copy.jpg
IMG_0959 copy.jpg (642.36 KiB) Viewed 3583 times

Post Reply

Return to “Workshop”