Help converting a Leading Edge DC 2014

User avatar
-Space-NATO-

12 Aug 2022, 02:23

Hello! I'm currently trying to revive an DC 2014 but with no success. After reading countless posts about this board and it's infamous reset line I thought it was an easy job but got no luck.

This is what I managed to do so far.

Flashed a pro micro with Soarer_at2usb_v1.12_atmega32u4 using QMK
Soldered cables in GRD, 2, 3, VCC, 10 pins.
Spoiler:
Image
Connect the pro micro with the keyboard.
Spoiler:
Image
In QMK got the famous R05 error.
Spoiler:
Image
Try to reset the PC, unplug the keyboard and all those combinations but still no luck.

Recheck wiring, seems to be OK.
Spoiler:
Image
Get frustrated and write a post in DT asking for help.

Have anyone managed to get up and running this board after getting any of this errors? Any help is appreciated. :)
~Please Help~ :cry:

Referenced Posts.
https://geekhack.org/index.php?topic=83404.0
https://klikkyklik.wordpress.com/2016/04/20/dc-2014/
viewtopic.php?f=7&t=8448&start=30
https://geekhack.org/index.php?topic=17 ... msg1501460
https://geekhack.org/index.php?topic=17458.500
viewtopic.php?f=7&t=4567&start=

User avatar
Muirium
µ

12 Aug 2022, 15:27

Two things:

User avatar
-Space-NATO-

12 Aug 2022, 16:49

Yes µ but finally got it working with TMK! Works great now.
Thanks for PlacafromHell, KarlMartin95 and Headphone_Jack for helping me out!

User avatar
Muirium
µ

12 Aug 2022, 18:01

So did Arakula’s not work? Just curious for future reference. People will ask this again.

Post Reply

Return to “Workshop”