Teensy 2.0 alternatives, ATmega32U4

User avatar
t8c

14 Jan 2020, 08:49


Findecanor

14 Jan 2020, 08:57

The Pro Micro and Leonardo have almost the same electronics. A difficulty is that Arduino boards tend to have a different pin numbering, making iit more difficult to find out which actual ATmega32U4 pin is where.
I found this chart in the Wiki that brings them together. (AVR pins in yellow)
That leaves the bootloader. I know people have flashed the Leonardo with avrdude - and there should be forum posts about it out there to google for

bloopbloop

18 Jan 2020, 22:05

Thanks guys for your help. I will give it a try.

User avatar
anthonymak

26 Jan 2020, 15:14

the adafruit 32u4 breakout board is good if you need a lot of IO. some people flash leonardo bootloader with the breakout board but the original adafruit 32u4 breakout board bootloader is more logical,

bloopbloop

31 Jan 2020, 23:46

The Leonardo worked perfectly as a converter following the guide. Pretty sad that the guide was deleted/taken down as Leonardo is widely available and pretty cheap to boot. Also there was zero soldering needed with some dupont cables, good for beginners and as a flexible converter platform.

Post Reply

Return to “Workshop”