HyperMicro / Deadline: 2015-03-17 / -32767 days to go! :o

User avatar
7bit

06 Mar 2015, 21:24

¡¡¡BUMP!!!
:mad:

lolpes

09 Mar 2015, 00:45

I ordered, hope i made it in time :p, didnt see it posted here, but where can i order the stabs? I ordered the ansi400M layout, can anyone help me and teel wich stabs should i get?

User avatar
7bit

09 Mar 2015, 09:01

You need platemounted ones, that will be available a little later.
:o

The PCB and plate production will take a few weeks, anyway.
:roll:

User avatar
7bit

09 Mar 2015, 13:33

I've added stabilisers (plate mount) to the pricelist:

Code: Select all

Order-ID      | Price |  Pcs|Description
HYPER/MICRO/P1| 20 EUR|    1|Prototype PCB (5x12)
TEENSY20      | 22 EUR|    1|Teensy 2.0 controller <--- you need this for the HyperMicro!
TEENSY31      | 28 EUR|    1|Teensy 3.1 controller
TEENSYPP      | 32 EUR|    1|Teensy++ 2.0 controller

Code: Select all

Order-ID      | Price |  Pcs|Description
DIODE10       |  1 EUR|   10|1N4148 diodes (10)
DIODE100      |  3 EUR|  100|1N4148 diodes (100) <--- you need about these many for 2 HyperMicro-s!
DIODE150      |  4 EUR|  150|1N4148 diodes (150)
DIODE500      |  8 EUR|  500|1N4148 diodes (500)
DIODE1K       | 12 EUR| 1000|1N4148 diodes (1k)
DIODE2K       | 23 EUR| 2000|1N4148 diodes (2k)
DIODE5K       | 55 EUR| 5000|1N4148 diodes (5k)
DIODE10K      |105 EUR|10000|1N4148 diodes (10k)

Code: Select all

Order-ID      | Price |  Pcs|Description
STAB200       |  2 EUR|    1|Cherry plate mount stab 2-2.75u
STAB203       |  5 EUR|    3|Cherry plate mount stab ISO-TKL
STAB204       |  6 EUR|    4|Cherry plate mount stab ANSI-TKL
STAB206       |  8 EUR|    6|Cherry plate mount stab ISO-102
STAB207       |  9 EUR|    7|Cherry plate mount stab ANSI-101
STAB400       |  2 EUR|    1|Cherry plate mount stab 4u
STAB625       |  2 EUR|    1|Cherry plate mount stab 6.25u
STAB700       |  2 EUR|    1|Cherry plate mount stab 7u

Code: Select all

Order-ID             |Price |Description
HYPER/MICRO/7BIT     |10 EUR|normal_plate
HYPER/MICRO/ANSI100  |10 EUR|normal_plate
HYPER/MICRO/ANSI400  |10 EUR|normal_plate
HYPER/MICRO/ANSI400M |10 EUR|normal_plate
HYPER/MICRO/ANSI625  |10 EUR|normal_plate
HYPER/MICRO/ANSI700  |10 EUR|normal_plate
HYPER/MICRO/SYM100   |10 EUR|normal_plate
HYPER/MICRO/SYM400   |10 EUR|normal_plate
HYPER/MICRO/SYM700   |10 EUR|normal_plate
HYPER/MICRO/7BITH    |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/ANSI100H |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/ANSI400H |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/ANSI400MH|10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/ANSI625H |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/ANSI700H |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/SYM100H  |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/SYM400H  |10 EUR|plate_with_trackpoint-hole
HYPER/MICRO/SYM700H  |10 EUR|plate_with_trackpoint-hole

:o

I still need to add legs for the Teensy ...

Sample order to be submitted as pm to user CherryMX:

HYPER/MICRO/P1
HYPER/MICRO/ANSI700H
STAB700
TEENSY20
MXCLEAR/NW 45
MXGREY/NW
DIODE100
ypur e-mail address
ADDRESS
your shipping address
with name
street,
town and
country


:roll:

lolpes

09 Mar 2015, 19:56

hey how can i change my order to include the stabs? and also, how can i update my shipping address? the one i gave is all messed up in the order email due to punctiation signs like "~" :/ need to update it to all caps...

User avatar
7bit

09 Mar 2015, 21:03

Just submit a new order for the stabs. They will be added to your existing order.
:-)

The only trouble with your address is that you sent it in one line and it seems the name is missing:

<insert name here>
Xxx xxx Xx\~xxx, n$^{\underline{\mathsf{o}}}$221B
Xxxx\'xxxx, X\~xx Xxxxx
Xxxxx
Xxxxx

Anything else comes out perfectly!!!!
:ugeek:

Hint:
Spoiler:
LaTeX rulez teh world!!!
:evilgeek:

User avatar
wlhlm
~

09 Mar 2015, 21:31

Wait, are you parsing the orders with Latex?

User avatar
7bit

09 Mar 2015, 21:34

wlhlm wrote: Wait, are you parsing the orders with Latex?
No, the address labels are typeset in LaTeX.

User avatar
wlhlm
~

09 Mar 2015, 21:36

7bit wrote:
wlhlm wrote: Wait, are you parsing the orders with Latex?
No, the address labels are typeset in LaTeX.
Ah, I was a bit confused there.

lolpes

10 Mar 2015, 22:46

hey again, sorry to bother again, i ordered the ansi400MH plate and wanted to change it to ansi625H, but endend up adding it to the existing order instead of replacing it, how can i solve this?

User avatar
chzel

10 Mar 2015, 22:50

Send

Code: Select all

HYPER/MICRO/ANSI400MH 0
to the bot to change the quantity to zero.

lolpes

10 Mar 2015, 22:56

chzel wrote: Send

Code: Select all

HYPER/MICRO/ANSI400MH 0
to the bot to change the quantity to zero.
Thanks :D

User avatar
7bit

11 Mar 2015, 00:39

2 more days!
:o

User avatar
flabbergast

11 Mar 2015, 17:29

Roll... roll... roll with the deadline...

User avatar
scottc

11 Mar 2015, 17:32

:roll: :roll: :roll:

User avatar
7bit

11 Mar 2015, 19:30

I've got to finetune it a bit and also did not get a response from the plate manufacturer ...
:-)

User avatar
SL89

11 Mar 2015, 19:32

Are the PCBs and plates made in your neck of the woods?

User avatar
7bit

11 Mar 2015, 20:17

About 350-600km away.
:-)

User avatar
SL89

11 Mar 2015, 20:39

Ah ok

jonlorusso

13 Mar 2015, 15:16

I harvested a trackpoint module from an old thinkpad keyboard. It looks pretty similar to pictures I've seen posted here. I still need to figure out how to dremel these keycaps without making a mess. Also, I don't fully understand how a stem gets attached to it. Does it just fit over the top similar to the rubber cap/nub?

tedk84

16 Mar 2015, 11:08

am i still able to participate? sure, right ?

lolpes

18 Mar 2015, 01:21

Hey 7bit, i still have my invoice unpaid and would like to pay it today, but i don't know if i have exceeded the 7 day period or not, can you tell me if i can still pay it and have my order processed or do i have to make another order?

User avatar
7bit

18 Mar 2015, 08:30

lolpes wrote: Hey 7bit, i still have my invoice unpaid and would like to pay it today, but i don't know if i have exceeded the 7 day period or not, can you tell me if i can still pay it and have my order processed or do i have to make another order?
The order is still there.
:-)

User avatar
7bit

18 Mar 2015, 08:41

After the deadline, these are the plates that are available:

Code: Select all

Order-ID             |Ordered|Available|Price |Description
HYPER/MICRO/P1       |     12|       10|20 EUR|Prototype PCB  (4x12; req. TEENSY20)
HYPER/MICRO/7BITH    |      3|        6|10 EUR|plate with trackpoint-hole
HYPER/MICRO/SYM100H  |      8|        5|10 EUR|plate with trackpoint-hole
HYPER/MICRO/SYM700H  |      1|        9|10 EUR|plate with trackpoint-hole
HYPER/MICRO/ANSI100H |      1|        9|10 EUR|plate with trackpoint-hole
HYPER/MICRO/ANSI400H |      2|        8|10 EUR|plate with trackpoint-hole
HYPER/MICRO/ANSI700H |      1|        9|10 EUR|plate with trackpoint-hole
:o

I will order 25 PCBs and 10 of each plate, except for HYPER/MICRO/SYM100H (15).
:-)

User avatar
Medowy

18 Mar 2015, 09:33

Is it too late to get in? :D

:ugeek:

User avatar
7bit

18 Mar 2015, 09:46

I posted the list of what is still available!
;-)

User avatar
Medowy

18 Mar 2015, 09:48

7bit wrote: I posted the list of what is still available!
;-)
Awesome. I will place an order then.

User avatar
SL89

18 Mar 2015, 09:56

I realized i never actually placed my order so i switched to ANSI400H :D

lolpes

19 Mar 2015, 01:14

I have tried again and again today to pay for my order, but my bank won't seem to make the transfer...will try again tomorrow with someone from the bank itself, if not, i have tried to pay in paypal, i don't mind the extra 3.74 if i can finnaly pay for this :p but when i select the amount asked on my order : 98.00 USD the conversion goes to 95.96 euros, and my invoice with paypal fees(3.74) based on current conversion rates is 90.74. Based on this how do i proceed? do i pay an amount that converts from paypal into 90.74 euros(92.7 USD) or do i have to pay the full 95.96 euros? because for the second choice i would be spending almost 10 euros on paypal fees alone and it is a bit too much.

It is going to be my first mechanical keyboard, and also my first purchase in here so sorry if i may seem a noob at this :p

User avatar
7bit

19 Mar 2015, 09:49

If you pay by PayPal, you need to pay in USD. Your bank does the conversion.

But you are in a Euro-country, why not pay in your own currency directly?
:?

Post Reply

Return to “Group buys”