Storing sorted things
- elecplus
- Location: Kerrville, TX, USA
- DT Pro Member: 0082
- Contact:
Storage is starting to become an issue for me. I have over 60 buckets of keyboards, mostly sorted by brand and type. That is OK for now. But what do you suggest for storing cleaned, inspected, and sorted small parts, like key caps? Just on the IBM caps alone there are almost 200 different caps, and then there are 1-part and 2-part. Then there are Apple caps, space invaders, Alps, Cherry MX caps, and list grows exponentially. How does one store 500 different sets of small parts in widely varying quantities? Space is an issue, now that I don't have the warehouse. Any and all suggestions greatly appreciated.
- Wodan
- ISO Advocate
- Location: ISO-DE
- Main keyboard: Intense Rotation!!!
- Main mouse: Logitech G903
- Favorite switch: ALL OF THEM
- DT Pro Member: -
I have five of these flexible organizers:
But I am planning to get about 15-20 more of them. Four of them are used for keycaps, about 2-3 compartments will hold a set of Cherry keycaps. One of them is used as a switch toolbox containing Cherry MX and Alps switch parts. Even small party like the diodes/jumpers removed from harvested Cherry switches and a wide array of different MX springs.
The transparent lid help identify the content fast. But I used a UV proof spray coat to cover the lids of the organizers I use to store light ABS caps to protect them from UV light.
Oh and they stack well.
Here's another option that doesn't stack nearly as well!
But I am planning to get about 15-20 more of them. Four of them are used for keycaps, about 2-3 compartments will hold a set of Cherry keycaps. One of them is used as a switch toolbox containing Cherry MX and Alps switch parts. Even small party like the diodes/jumpers removed from harvested Cherry switches and a wide array of different MX springs.
The transparent lid help identify the content fast. But I used a UV proof spray coat to cover the lids of the organizers I use to store light ABS caps to protect them from UV light.
Oh and they stack well.
Here's another option that doesn't stack nearly as well!
- Chyros
- Location: The Netherlands
- Main keyboard: whatever I'm reviewing next :p
- Main mouse: a cheap Logitech
- Favorite switch: Alps SKCM Blue
- DT Pro Member: -
I hold my keycaps in zip seal bags, either as sets or as types. For example, you can keep a full set of Model M caps in one bag, or compounded incomplete sets in another.
I keep switches and other parts in plastic boxes, essentially Tupperware, except the absolute cheapest variety. Things I hae a lot of go in bigger boxes, things I have only a few of go in small sauce pots. The boxes I stack in a collapsible crate.
I use really cheap labels to stick on the boxes to label them. The good thing about cheap labels is that they come off easily if you re-purpose the box, too.
I keep switches and other parts in plastic boxes, essentially Tupperware, except the absolute cheapest variety. Things I hae a lot of go in bigger boxes, things I have only a few of go in small sauce pots. The boxes I stack in a collapsible crate.
I use really cheap labels to stick on the boxes to label them. The good thing about cheap labels is that they come off easily if you re-purpose the box, too.
- clickykeyboards
- Main keyboard: 1395682
- Favorite switch: buckling spring
- DT Pro Member: 0233
- Contact:
When I first started, I just kept the keycaps on the frames of scrapped model M keyboards stacked in the workshop. But that took up too much valuable space that I needed for more important restoration projects. Without grouping the keys, I would often waste time searching through the pile and I never had a means to estimate the inventory of individual keys that I needed to save while scrounging (or had an excess of).
*The most often lost keys on the model M keyboard are #1) Esc key, #2) Ctrl key, #3) minus key from numberpad.
Here's a photo of how I now have my model M keycaps stored in an old 5-drawer organizer for 35mm photographic slides.
I get daily requests for single-key replacements and without having an organized system, it would not be cost-effective or time-effective to help the 500+ annual requests for vintage spare parts.
http://www.theverge.com/2014/10/7/6882427/king-of-keys
*The most often lost keys on the model M keyboard are #1) Esc key, #2) Ctrl key, #3) minus key from numberpad.
Here's a photo of how I now have my model M keycaps stored in an old 5-drawer organizer for 35mm photographic slides.
I get daily requests for single-key replacements and without having an organized system, it would not be cost-effective or time-effective to help the 500+ annual requests for vintage spare parts.
http://www.theverge.com/2014/10/7/6882427/king-of-keys
-
- Location: Cleveland, OH, US
- Main keyboard: M13, AKB-625, 9000V2
- Main mouse: Steelseries Rival 300, WoW Wireless
- Favorite switch: Buckling Spring
- DT Pro Member: -
- Contact:
For complete sets, I use ziploc bags. They're cheap, fairly impermeable, reasonably sturdy, and reusable. I use drawers like clickykeyboards for individuals from broken down sets. Just smaller since I don't have as many. Cables get tagged with the origin PN using regular paper tags on string and tossed in a boring plastic bin. (SDL connectors of course, get bubble wrap around them.) These, to be exact. This method works really well when dealing with a variety of makes and models, since like stays with like for caps and if someone says a "G80-1800 Blah Blah" cable you can just check the label.
Certain small parts get significantly more special treatment, depending on how rare/difficult/obnoxious they are to repair/replace/maintain. For example, I have a little plastic box for trackpoint buttons (the silver discs) to rattle around in, but the button covers get individually bubble wrapped and then cardboard wrapped.
Components like M13 and TrackPoint II controllers? Those go in anti-static bags, which get packed in very expensive custom boxes from CCI, one to a box. (The boxes were repurposed from my actual side gig.)
Certain small parts get significantly more special treatment, depending on how rare/difficult/obnoxious they are to repair/replace/maintain. For example, I have a little plastic box for trackpoint buttons (the silver discs) to rattle around in, but the button covers get individually bubble wrapped and then cardboard wrapped.
Components like M13 and TrackPoint II controllers? Those go in anti-static bags, which get packed in very expensive custom boxes from CCI, one to a box. (The boxes were repurposed from my actual side gig.)
-
- Location: JAPAN
- Main keyboard: Model M, dodoo dome keyboard,CherryMX numeric pad
- Main mouse: logitech Master,M705 and 3 Logitech mice
- Favorite switch: ff
- DT Pro Member: -
I'm using the umbrella plastic bag(free from library) to store the switches, cables and keycaps and than tie the bag.
And the small zip bag store the small parts.
I think this is important
1.clean
2.free to get
3.easy to use and store
And the small zip bag store the small parts.
I think this is important
1.clean
2.free to get
3.easy to use and store
- fohat
- Elder Messenger
- Location: Knoxville, Tennessee, USA
- Main keyboard: Model F 122-key terminal
- Main mouse: Microsoft Optical Mouse
- Favorite switch: Model F Buckling Spring
- DT Pro Member: 0158
Very impressive!Wodan wrote: ↑
I have five of these flexible organizers:
But I am planning to get about 15-20 more of them.
But you probably need to see a psychiatrist.
- Wodan
- ISO Advocate
- Location: ISO-DE
- Main keyboard: Intense Rotation!!!
- Main mouse: Logitech G903
- Favorite switch: ALL OF THEM
- DT Pro Member: -
Indeed and I have been checking the Aldi deals for months now ... They must be up again soon!
If you want to make them UV proof, I can recommend several layers of PlastiDip.
If you want to make them UV proof, I can recommend several layers of PlastiDip.
- pyrelink
- Location: USA
- Main keyboard: HHKB 2
- Main mouse: CST L-Trac
- Favorite switch: Capacitive Buckling Spring
- DT Pro Member: -
My storage is terrible. I have these things for storing individual keysets, switches, and other small parts:
I have probably 20 of those stacked in 5 or 6 large card board boxes. The rest of my stuff just gets dumped into the cardboard boxes, usually right in what ever they were shipped in. Makes locating what you need a pain in the ass, but its easy to stack everything up in the corner of the basement.
I have probably 20 of those stacked in 5 or 6 large card board boxes. The rest of my stuff just gets dumped into the cardboard boxes, usually right in what ever they were shipped in. Makes locating what you need a pain in the ass, but its easy to stack everything up in the corner of the basement.
- Elrick
- Location: Swan View, AUSTRALIA
- Main keyboard: Alps - As much as Possible.
- Main mouse: MX518
- Favorite switch: Navy Switch, ALPs, Model-M
- DT Pro Member: -
- elecplus
- Location: Kerrville, TX, USA
- DT Pro Member: 0082
- Contact:
I think I found something that will work for now. These are from Home Depot, and only cost $10 for a 2-pack. They interlock, so you can stack them really tall. And each compartment holds about 30 1-piece IBM caps!
- Wodan
- ISO Advocate
- Location: ISO-DE
- Main keyboard: Intense Rotation!!!
- Main mouse: Logitech G903
- Favorite switch: ALL OF THEM
- DT Pro Member: -
All southern Germans watch out, the organizers I'm using will soon be for sale again:
https://www.aldi-sued.de/de/angebote/an ... ganizer-3/
https://www.aldi-sued.de/de/angebote/an ... ganizer-3/
- duynguyenle
- Location: UK
- Main keyboard: Cooler Master MasterKeys Pro L
- Main mouse: Logitech G502
- Favorite switch: MX Brown
- DT Pro Member: -
Wodan can you pick up maybe 10 of those and send them to me along with the HADapter kits I ordered? I believe the 3 Euros for HADapter postage fees should cover these as well yeah?Wodan wrote: ↑All southern Germans watch out, the organizers I'm using will soon be for sale again:
https://www.aldi-sued.de/de/angebote/an ... ganizer-3/
-
- Location: Cleveland, OH, US
- Main keyboard: M13, AKB-625, 9000V2
- Main mouse: Steelseries Rival 300, WoW Wireless
- Favorite switch: Buckling Spring
- DT Pro Member: -
- Contact:
Good news for US citizens.duynguyenle wrote: ↑Wodan can you pick up maybe 10 of those and send them to me along with the HADapter kits I ordered? I believe the 3 Euros for HADapter postage fees should cover these as well yeah?Wodan wrote: ↑All southern Germans watch out, the organizers I'm using will soon be for sale again:
https://www.aldi-sued.de/de/angebote/an ... ganizer-3/
https://www.aldi.us/en/grocery-home/hom ... /workzone/
Yep! They're going to be bringing them here themselves.
- Phenix
- -p
- Location: Germany, Cologne
- Main keyboard: F122, soarer´d|Novatouch-s
- Main mouse: Roccat Kone Pure|Rollermouse
- Favorite switch: BS F|Topre-s
- DT Pro Member: -
Wodan wrote: ↑All southern Germans watch out, the organizers I'm using will soon be for sale again:
https://www.aldi-sued.de/de/angebote/an ... ganizer-3/
How do you take care of small parts like diodes? So far I have nearly everything in individual ziploc bags, but this sometimes sucks as recognizing takes a bit longer (I should start writing an "map" of each box )
-
- Location: United Arab Emirates
- Main keyboard: zeeshan
- Main mouse: Squeaker
- Favorite switch: Cherry MX Blue
- Contact:
You made some good points there.