mec.Numpad - Homemade Keypad
-
- Location: Switzerland
- Main keyboard: Pok3r 2
- Main mouse: N/A
- Favorite switch: Cherry MX Clear
- DT Pro Member: -
Hi All,
I mad a small keypad as a first build:
You can check out the full post there https://geekhack.org/index.php?topic=93226.0
Let me know what do you think !
I mad a small keypad as a first build:
You can check out the full post there https://geekhack.org/index.php?topic=93226.0
Let me know what do you think !
-
- Location: Switzerland
- Main keyboard: Pok3r 2
- Main mouse: N/A
- Favorite switch: Cherry MX Clear
- DT Pro Member: -
Thanks! Do you enjoy the knob sound ? https://youtu.be/bEPTY0YaYSEchuckdee wrote: ↑#dta2018
Early Nomination for Best "other" input device or Best Project depending on how the categories fall.
- DustGod
- Yet another IBM snob
- Location: Italy
- Main keyboard: IBM Model F 6110344 "Battleship"
- Main mouse: Unbranded vertical mouse
- Favorite switch: Beam Spring | Buckling Spring
- DT Pro Member: 0196
I really like the retro feel this has. Very nice! The two keycaps on the bottom row look off, but I'm sure you're already fixing that
How much does the whole thing cost you? And, would it be possible and easy to do this in a macropad version, with a 5 by 4 cluster of 1u keys?
How much does the whole thing cost you? And, would it be possible and easy to do this in a macropad version, with a 5 by 4 cluster of 1u keys?
-
- Location: Switzerland
- Main keyboard: Pok3r 2
- Main mouse: N/A
- Favorite switch: Cherry MX Clear
- DT Pro Member: -
Thanks ! Correct, the keycaps are not made for this row, indeed trying to fix them - by buying othersDustGod wrote: ↑I really like the retro feel this has. Very nice! The two keycaps on the bottom row look off, but I'm sure you're already fixing that
How much does the whole thing cost you? And, would it be possible and easy to do this in a macropad version, with a 5 by 4 cluster of 1u keys?
To produce this prototype probably cost something like 300USD, completely unoptimized supply chain, I had most of my costs in transport fees...
The macropad idea sounds great! In case of upgrade of the project I will remember this idea!
- TuxKey
- LLAP
- Location: Netherlands
- Main keyboard: Leopold FC660C, Leopold FC660M mx-clears
- Main mouse: Apple Magic Trackpad, ducky Secret (PBT mouse)
- Favorite switch: Cherry MX-clear, Topre 45gr/55gr
- DT Pro Member: 0137
You made this !! impressive ass hell looks good my compliments
looks like the "Microsoft's Surface Dial "
you mentioned the four switches on the right.. i would turn does keys in to toggle switches for the knob..
don't know if that's what you mean when you say "rotary encoder".
So the default behavior for the knob would be volume control.
But pressing the left key and turning the knob turns it in to vertical scrolling.
And right key would adjust brightness.
lower left zoom..
and lower right don't know yet. haha so many options..
where did you learn to do this ???? Electrical engineering ?
i would call this an improvement on the "Microsoft's Surface Dial " like 100 times better hahaha.
looks like the "Microsoft's Surface Dial "
you mentioned the four switches on the right.. i would turn does keys in to toggle switches for the knob..
don't know if that's what you mean when you say "rotary encoder".
So the default behavior for the knob would be volume control.
But pressing the left key and turning the knob turns it in to vertical scrolling.
And right key would adjust brightness.
lower left zoom..
and lower right don't know yet. haha so many options..
where did you learn to do this ???? Electrical engineering ?
i would call this an improvement on the "Microsoft's Surface Dial " like 100 times better hahaha.
- Vecktrex
- Location: New Hampshire, US
- Main keyboard: IBM 6112884
- Main mouse: Logitech G403
- Favorite switch: Capacitive Buckling Spring
- DT Pro Member: -
- Contact:
I like the simple, clean aesthetic. Looks like the perfect mini-macro board. My brother was complaining about the absence of a volume knob on his new keyboard, might point him to one of these builds.
-
- Location: Switzerland
- Main keyboard: Pok3r 2
- Main mouse: N/A
- Favorite switch: Cherry MX Clear
- DT Pro Member: -
Thanks for the good words!TuxKey wrote: ↑You made this !! impressive ass hell looks good my compliments
looks like the "Microsoft's Surface Dial "
you mentioned the four switches on the right.. i would turn does keys in to toggle switches for the knob..
don't know if that's what you mean when you say "rotary encoder".
So the default behavior for the knob would be volume control.
But pressing the left key and turning the knob turns it in to vertical scrolling.
And right key would adjust brightness.
lower left zoom..
and lower right don't know yet. haha so many options..
where did you learn to do this ???? Electrical engineering ?
i would call this an improvement on the "Microsoft's Surface Dial " like 100 times better hahaha.
The four switches on the right are programmable (as all the switches and the knob features) for now I can change the behavior of the knob switching layers - there are 4 layers on this one. For now I use the four keys as media control (start/pause - stop - previous - next), but surely the brightness control is a good idea
I never thought about the scrolling feature - I am not so familiar with the Microsoft Dial - but I will definitely try to configure scrolling on the knob - thanks for the great idea - I will keep you up to date.
Electronic is my main skill so I can design such circuit but my main challenge was the enclosure and mechanical design was quite a challenge for me
-
- Location: Switzerland
- Main keyboard: Pok3r 2
- Main mouse: N/A
- Favorite switch: Cherry MX Clear
- DT Pro Member: -
Thanks! glad that you like the look of the boardVecktrex wrote: ↑I like the simple, clean aesthetic. Looks like the perfect mini-macro board. My brother was complaining about the absence of a volume knob on his new keyboard, might point him to one of these builds.
- Scarpia
- Location: Sweden
- Main keyboard: F77 / Alps SKCM Brown TKL
- Main mouse: Logitech MX Anywhere 2
- Favorite switch: Capacitive BS, Alps SKCM Brown
- DT Pro Member: 0223
That is a gorgeous build, Afferscheim. The case is particularly nice, clearly custom yet sleek and top-of-the-line with what looks like tight tolerances and the anodized finish - so cool! And as someone who owns a Griffin PowerMate, I applaud the style of your rotary encoder.
With those skills, I suspect you could make a solid living designing custom keyboard kits.
The Griffin PowerMate:
With those skills, I suspect you could make a solid living designing custom keyboard kits.
The Griffin PowerMate:
Spoiler:
- mecano
- Location: Paris
- Main keyboard: Tipro KMX128
- Main mouse: Kensington Orbit Trackball with scroll ring
- Favorite switch: Beam Spring
- DT Pro Member: -
The powerMate can be pushed/clicked though.
You should try to replace that rotary encoder with a momentary push rotary encoder so the encoder behaviour could be switched by it own.
Did you use tmk or qmk?
You should try to replace that rotary encoder with a momentary push rotary encoder so the encoder behaviour could be switched by it own.
Did you use tmk or qmk?
-
- Location: Switzerland
- Main keyboard: Pok3r 2
- Main mouse: N/A
- Favorite switch: Cherry MX Clear
- DT Pro Member: -
Thanks Scarpia, appreciate your comments about the enclosure!Scarpia wrote: ↑That is a gorgeous build, Afferscheim. The case is particularly nice, clearly custom yet sleek and top-of-the-line with what looks like tight tolerances and the anodized finish - so cool! And as someone who owns a Griffin PowerMate, I applaud the style of your rotary encoder.
With those skills, I suspect you could make a solid living designing custom keyboard kits.
The Griffin PowerMate:Spoiler:
I did not know about the Griffin PowerMate, it's quite a nice peripheral.
- Laser
- emacs -nw
- Location: Romania
- Main keyboard: Plum TKL \w Topre domes (work) / Novatouch (home)
- DT Pro Member: 0180
From the OP Features List description on geekhack:mecano wrote: ↑The powerMate can be pushed/clicked though.
3. clicky programmable rotary encoder from Alps with a huge knob (can be pushed down too)
-
- Location: Switzerland
- Main keyboard: Pok3r 2
- Main mouse: N/A
- Favorite switch: Cherry MX Clear
- DT Pro Member: -
Hi mecano, the knob can be pushed down too - it behaves like a pushbutton. You can check this out : https://youtu.be/bEPTY0YaYSEmecano wrote: ↑The powerMate can be pushed/clicked though.
You should try to replace that rotary encoder with a momentary push rotary encoder so the encoder behaviour could be switched by it own.
Did you use tmk or qmk?
What do you meant by tmk / gmk ?
Thanks for the suggestion anyway
- mecano
- Location: Paris
- Main keyboard: Tipro KMX128
- Main mouse: Kensington Orbit Trackball with scroll ring
- Favorite switch: Beam Spring
- DT Pro Member: -
Oh… if the OP is lazy enough to not copy/paste full features here, don't blame me of being too lazy to not have cross reading through boards to understand what is happening here
So what is this running with? teensy, arduino? Can we see the insides?
https://github.com/tmk/tmk_keyboard
https://github.com/qmk/qmk_firmware
So what is this running with? teensy, arduino? Can we see the insides?
https://github.com/tmk/tmk_keyboard
https://github.com/qmk/qmk_firmware
-
- Location: Switzerland
- Main keyboard: Pok3r 2
- Main mouse: N/A
- Favorite switch: Cherry MX Clear
- DT Pro Member: -
nobody is blaming you - none of these - I built this board around a SK5126 - if you are interested, you can learn more there : http://sprintek.com/products/SK5126.aspxmecano wrote: ↑Oh… if the OP is lazy enough to not copy/paste full features here, don't blame me of being too lazy to not have cross reading through boards to understand what is happening here
So what is this running with? teensy, arduino? Can we see the insides?
https://github.com/tmk/tmk_keyboard
https://github.com/qmk/qmk_firmware
However, If I would produce a batch of these, I would re-design the board to use a different controller, an ATMEGA would do fine as example.
- mecano
- Location: Paris
- Main keyboard: Tipro KMX128
- Main mouse: Kensington Orbit Trackball with scroll ring
- Favorite switch: Beam Spring
- DT Pro Member: -
Ehehe, was my way of blaming you
Yup go atmega and tmk/qmk, you will feel the fresh air of freedom and almost limitless possibilities considering that sk5126 FlexMatrix Programmer interface
Yup go atmega and tmk/qmk, you will feel the fresh air of freedom and almost limitless possibilities considering that sk5126 FlexMatrix Programmer interface
-
- Location: Switzerland
- Main keyboard: Pok3r 2
- Main mouse: N/A
- Favorite switch: Cherry MX Clear
- DT Pro Member: -
I have to agree with you, I will update this thread with my future decisions for suremecano wrote: ↑Ehehe, was my way of blaming you
Yup go atmega and tmk/qmk, you will feel the fresh air of freedom and almost limitless possibilities considering that sk5126 FlexMatrix Programmer interface
- depletedvespene
- Location: Chile
- Main keyboard: IBM Model F122
- Main mouse: Logitech G700s
- Favorite switch: buckling spring
- DT Pro Member: 0224
- Contact:
First things first: colour me very impressed. This device is in the "shut up and take my money!" category.Afferscheim wrote: ↑Let me know what do you think !
Second things second: what follows are my opinions, so feel free to tell me to sod off. Now...
I can already imagine myself using this... but I would be rotating the knob with my annular (ring) finger (this with the numpad either located to the right or to the left of the main keyboard). It therefore follows that the knob should be smaller (and lighter). How about making it 2U wide, to coincide with the small 2×2 pad below it, and only a little taller than the keys themselves, so moving the hand from the keys to the knob and back is more natural?
The knob sound is perfect. Keep it like that.
This kind of device also screams to have "left-handed" and "right-handed" versions.
I definitely look forward to seeing more of this!
- derzemel
- Location: Bucharest, Romania
- Main keyboard: FC660C, SSK, TX-1800 Nixie
- Main mouse: Mionix Naos 7000
- Favorite switch: Alps SKCL/SKCM tactile
I was thinking the same. Also I think that adding a dimple in the top of the knob would make it easier to spin with one finger. Something like this:depletedvespene wrote: ↑ How about making it 2U wide, to coincide with the small 2×2 pad below it, and only a little taller than the keys themselves, so moving the hand from the keys to the knob and back is more natural?
Spoiler:
-
- Location: Switzerland
- Main keyboard: Pok3r 2
- Main mouse: N/A
- Favorite switch: Cherry MX Clear
- DT Pro Member: -
Thanks for suggestions! I appreciate all the feedbacks! I like the idea of making it lighter and a little bit smaller as well.depletedvespene wrote: ↑I can already imagine myself using this... but I would be rotating the knob with my annular (ring) finger (this with the numpad either located to the right or to the left of the main keyboard). It therefore follows that the knob should be smaller (and lighter). How about making it 2U wide, to coincide with the small 2×2 pad below it, and only a little taller than the keys themselves, so moving the hand from the keys to the knob and back is more natural?Afferscheim wrote: ↑Let me know what do you think !
The knob sound is perfect. Keep it like that.
This kind of device also screams to have "left-handed" and "right-handed" versions.
!
The left handed model will for sure be available in case of a group buy !
-
- Location: Switzerland
- Main keyboard: Pok3r 2
- Main mouse: N/A
- Favorite switch: Cherry MX Clear
- DT Pro Member: -
Thank you for the suggestion! I like this idea a lot!derzemel wrote: ↑I was thinking the same. Also I think that adding a dimple in the top of the knob would make it easier to spin with one finger. Something like this:depletedvespene wrote: ↑ How about making it 2U wide, to coincide with the small 2×2 pad below it, and only a little taller than the keys themselves, so moving the hand from the keys to the knob and back is more natural?Spoiler:
-
- Location: Germany
- Main keyboard: I.T. Works CS05 Wireless Keyboard & Mouse
- Main mouse: Mouse
Hi Everyone, new guy here. Found this thread while googling for the SK5126 controller.
First of all, cool keypad, I'm a fan!
The reason I was Googling the SK5126 is because I need to buy a couple of them and (since I'm in Germany), the shipping price from the Manufacturer is prohibitively expensive. Does anyone know how I can get a couple of these chips shipped here without having to sell a kidney please?
(For those of you curious enough to ask what I'm doing: I'm a fan of Blackberry's Physical keyboards, especially the later ones which also double as a trackpad. I'm trying to hook up a keyboard off a BB Priv as a low-power USB output with a plan to later hook that up to whatever smartphone I'll buy next. (Long story))
First of all, cool keypad, I'm a fan!
The reason I was Googling the SK5126 is because I need to buy a couple of them and (since I'm in Germany), the shipping price from the Manufacturer is prohibitively expensive. Does anyone know how I can get a couple of these chips shipped here without having to sell a kidney please?
(For those of you curious enough to ask what I'm doing: I'm a fan of Blackberry's Physical keyboards, especially the later ones which also double as a trackpad. I'm trying to hook up a keyboard off a BB Priv as a low-power USB output with a plan to later hook that up to whatever smartphone I'll buy next. (Long story))