Micro Switch SD-16234 Keyboard Made for SSM VB3A S100

[schwasam]

Bought a Micro Switch SD-16234 from someone in Australia.
It seems that that this was produced for an SSM VB3A: http://www.s100computers.com/Hardware%2 ... B3/VB3.htm

Here are some pictures from the listing, will make hi res ones as soon as I got it.

https://drive.google.com/open?id=1hlSRA ... DGgj6UaPsS

https://drive.google.com/open?id=1pUBrV ... qH7aLPT0iA

https://drive.google.com/open?id=1KdBgO ... Z2Ue8XaDcs

https://drive.google.com/open?id=1NbOfM ... HFKvcCjewW

https://drive.google.com/open?id=1lHoim ... h_w_HKCT5D

https://drive.google.com/open?id=1cRlQ1 ... t5kFo7h3uK

https://drive.google.com/open?id=1WD6qg ... x4dtlBr4eu

https://drive.google.com/open?id=1enAMW ... JFJ5c3eev5

https://drive.google.com/open?id=15RJ9T ... ipJd63xU3m

https://drive.google.com/open?id=19GFP8 ... wmnExRWmk4

https://drive.google.com/open?id=1HhvPU ... PrL6D-3g6u

https://drive.google.com/open?id=1GHtPX ... rONhAa-pBv

[xxhellfirexx]

There is one listed on eBay right now.


https://picclick.com/RARE-Micro-Switch- ... 88513.html

[schwasam]

Looks nice!
I didn't get it because I just got the other one and I've already spent too much money on keyboards this year

[JP!]

I seen these as well. Pretty neat MicroSwitch boards.

[LessthanZero]

Yeah I wanted them so bad but this close to Christmas I have to buy adult things, I do have little kids and all that. But it just so happens that my conversion works perfectly with this type of Microswitch so if you would like to use it with a modern computer it should be no problem. My firmware works with that board right out of the box so you won't even need to mess with the key-map. Just pop out the Intel chip from its cradle and wire the Teensy. I used male to female jumpers and drove the male end directly into the cradle where the old 8048 went. Its a beautiful board I might see if I can get you to take some detailed pics of the case so I can fabricate my own, my board didn't come with a case, or those nice relegendable key caps.

[LessthanZero]

Here are the links to my writeup and the hex and source for this type of MicroSwitch SD Board

workshop-f7/man-vs-microswitch-converti ... 19688.html - my writeup of the conversion.

https://github.com/lessthan0/microswitchkbd?files=1 - here's the link for the source.

If you do end up using it just let me know how it goes I love seeing an old SD board come back to life.