So, the gray matte paint worn off and I also got bored of the greek caps, so here is the final potato version of my beamspring:
It's a bit dirty, I don't clean the keycaps in a while ago.
The new paintjob of my beamy beamspring
- PlacaFromHell
- Location: Argentina
- Main keyboard: IBM 3101
- Main mouse: Optical piece of shit
- Favorite switch: Beamspring
- DT Pro Member: -
- PlacaFromHell
- Location: Argentina
- Main keyboard: IBM 3101
- Main mouse: Optical piece of shit
- Favorite switch: Beamspring
- DT Pro Member: -
Unfortunately the IBM logo worn a bit because of the duct tape. Anyway isn't that bad.
- Hypersphere
- Location: USA
- Main keyboard: Silenced & Lubed HHKB (Black)
- Main mouse: Logitech G403
- Favorite switch: Topre 45/55g Silenced; Various Alps; IBM Model F
- DT Pro Member: 0038
Looks good. Did you use spray paint? If so, which brand and color?
When you say duct tape, do you mean that you used duct tape to mask the IBM badge for painting? Better to use masking tape. Alternatively, some people remove badges for painting and then reapply them afterward -- I'm not good at this and tend to damage the badges and, if present, the LED overlays. I've had better luck with masking.
When you say duct tape, do you mean that you used duct tape to mask the IBM badge for painting? Better to use masking tape. Alternatively, some people remove badges for painting and then reapply them afterward -- I'm not good at this and tend to damage the badges and, if present, the LED overlays. I've had better luck with masking.
- PlacaFromHell
- Location: Argentina
- Main keyboard: IBM 3101
- Main mouse: Optical piece of shit
- Favorite switch: Beamspring
- DT Pro Member: -
Yes. A can of Rust-Oleum nutmeg Ultra Cover, and a matte fosco finishing of the same line. I removed all the texture with a polishing machine and sanded the entire thing with a wet 500 sandpaper. The texture tends to remove the paint for some strange reason.
Yes, the tape for masking. I didn't had painting tape, so I used that "general purpose" gray tape. Is even harder than remove the badges of the plastic cases so it wasn't an option. I saw reproduction badges with very good quality, but my idea is restore this one, and if I can without remove it. I was crying inside when I saw my ultra expensive daily driver completely sanded.
Well, if you have a beamspring to paint, and no money for powdercoating, this is a very good option.
Yes, the tape for masking. I didn't had painting tape, so I used that "general purpose" gray tape. Is even harder than remove the badges of the plastic cases so it wasn't an option. I saw reproduction badges with very good quality, but my idea is restore this one, and if I can without remove it. I was crying inside when I saw my ultra expensive daily driver completely sanded.
Well, if you have a beamspring to paint, and no money for powdercoating, this is a very good option.
-
- Location: Stockholm, Sweden
- DT Pro Member: 0011
To be honest, it reminds me of plastic that has yellowed so much in the sun that it has turned brown.
Not to complain about the stylistic choice... I have myself considered painting keyboards in two-tone beige and light brown.
Not to complain about the stylistic choice... I have myself considered painting keyboards in two-tone beige and light brown.
These greek caps sound interesting. Do you have a picture of them? I do love all the different localisations of beamspring keyboards. Especially the cyrillic ones with mono-legends are such a special thing.
- JP!
- Location: United States
- Main keyboard: Currently a Model M
- Main mouse: Steel Series Sensei
- Favorite switch: Beam Spring
- DT Pro Member: 0194
- Contact:
Very industrial look. Reminds me of a brown Selectric typewriter Also it should be possible to reproduce that badge for a super fresh look.
- PlacaFromHell
- Location: Argentina
- Main keyboard: IBM 3101
- Main mouse: Optical piece of shit
- Favorite switch: Beamspring
- DT Pro Member: -
Everyone has his own taste I like the Televideo looking.Findecanor wrote: ↑04 Feb 2019, 00:20To be honest, it reminds me of plastic that has yellowed so much in the sun that it has turned brown.
Not to complain about the stylistic choice... I have myself considered painting keyboards in two-tone beige and light brown.
They are Selectric keycaps. I only saw two sets in greek, one black and one gray. There you have:
The edgy beamspring
I can also cut a black Selectric badge for that industrial look Loots of cool solutions.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
Impressive !