Sun space saving keyboard "Compact 1" (from 1994/95)

User avatar
AJM

10 Mar 2019, 16:17

As teased a few days ago, here comes the cleaned Sun keyboard, which I saved from the bin, because of its space saving appeal.

First the positive aspect: The looks (I really like that curved simple design)
a02.jpg
a02.jpg (746.99 KiB) Viewed 7188 times
a03.jpg
a03.jpg (497.73 KiB) Viewed 7188 times
a04.jpg
a04.jpg (620.76 KiB) Viewed 7188 times
a05.jpg
a05.jpg (698.5 KiB) Viewed 7188 times
a06.jpg
a06.jpg (511.73 KiB) Viewed 7188 times

A nice quirky touch - the key that usually only shows the "accent aigu" and "accent grave" here has little squares as placeholders for the letter. (The legends are indeed dark blue/purple.)
a07.jpg
a07.jpg (1.18 MiB) Viewed 7188 times

Lots of special German legends
a08.jpg
a08.jpg (1.1 MiB) Viewed 7188 times

The small print (The big thick sticker from the renting company is pretty much the only piece of metal on this keyboard!)
a09.jpg
a09.jpg (1.02 MiB) Viewed 7188 times

The accompanying mouse
a10.jpg
a10.jpg (804.17 KiB) Viewed 7188 times

According to the sticker - specific for this compact keyboard
a11.jpg
a11.jpg (484.22 KiB) Viewed 7188 times

User avatar
AJM

10 Mar 2019, 17:38

Now to the darker sides of this keyboard ...

This keyboard is not meant to be taken apart.

Levels of frustration while trying to open it:

- Yippee! Five screws
- wait ... no, there are 3 clips at the front, that have to be bent simultaneously
- wait ... no, there are 2 more clips under the rubber feet
- wait ... no, there are 2 more clips at the sides
- so now I can flip it open (only held by more clips at the back) !!!!
- oh no, I can't, because the cut-outs for the top row of the keys is too tight to flip over the keyscaps
- so first I have to take the keycaps off, which is difficult because there's not much space between keys and case, made worse by an half open case top


Stabilized keys (even the 1.75u keys like CapsLock, left Ctrl ("Strg") and right Shift are stabilized)
... with 24 years old - but still juicy - lube, including collected dust
b02.jpg
b02.jpg (954.04 KiB) Viewed 7168 times

Another detail of maintenance unfriendly-ness: When keycaps are taken off, the hooks of the barrel plate rip out a piece of plastic.
b03.jpg
b03.jpg (162.68 KiB) Viewed 7168 times

The barrel plate - after cleaning
b04.jpg
b04.jpg (1.04 MiB) Viewed 7168 times
b05.jpg
b05.jpg (554.7 KiB) Viewed 7168 times

The back plate with little arches that (should) clip onto hooks of the barrel plate. (One was already broken off)
b06.jpg
b06.jpg (233.68 KiB) Viewed 7168 times

Others have never been clipped into the barrel plate, instead - after 24 years - they're bent to the side.
b07.jpg
b07.jpg (211.33 KiB) Viewed 7168 times

The membranes. Interesting information on the controller board: a test date from Dec 29 1994.
b08.jpg
b08.jpg (1.58 MiB) Viewed 7168 times

Plate sandwich, put back together. (The bent arches had been bent back - after slightly melting them. During assembling another half of an arch broke and a few others cracked in the middle of the top, but they're still doing their job.)
b09.jpg
b09.jpg (909.78 KiB) Viewed 7168 times

Concerning key feel: It's the worst key feel of a rubber dome, that I have experienced so far.
Apart from the main cluster the keys are narrower than usual to save space (16 millimeters instead of 19). Somehow they managed to make the feel of these narrow keys worse. The power key even more so.
Then the Sun engineers must have thought, what can we do now? That can't be the end of terrible key feel. Ha! Let's put two more springs under the spacebar, that is already mushy and wobbly, and let's put them on the very ends of the key, so that the already struggling stabilizer gets a real workout.
And so they did. I present - the worst key in history:
b10.jpg
b10.jpg (928.78 KiB) Viewed 7168 times

For documentation - one big and 2 small cracks, that must have been caused by an accident and which I glued back together. (Two more of the narrow beams of the top case broke during disassembling and after glueing them too, they broke during assembling - and 2 tiny new cracks appeared in other places.)
b11.jpg
b11.jpg (517.16 KiB) Viewed 7168 times

The internals of the roller mouse (made by Logitech - as usual)
b12.jpg
b12.jpg (438.6 KiB) Viewed 7168 times

Because I hadn't done my research, I tried to plug the proprietary connector into a PS2-USB converter, which pushed the additional pin in the middle into the connector. (top left - compared to the intact one bottom right)
b13.jpg
b13.jpg (143.66 KiB) Viewed 7168 times
Last edited by AJM on 10 Mar 2019, 19:48, edited 1 time in total.

User avatar
PlacaFromHell

10 Mar 2019, 18:03

I have an HP terminal keyboard with similar (if not the same) rubberdomes and barrels and it feels awesome :?

Findecanor

10 Mar 2019, 18:31

Interesting. According to the FCC code on the label, it was made by Key Tronic. Some of their early PC keyboards were also mushy but they shaped up, and some of their domes from the late '90s are among the best-feeling regular rubber dome keyboards IMHO.

The style is otherwise like the Sun Type 5 and 5c, which were made by Fujitsu. Thier domes are also mushy, but Fujitsu domes were improved in the Sun Type 7.

User avatar
Chyros

10 Mar 2019, 23:13

Very nice! These Type 5-era Sun keyboards are super slick, really really elegant ^^ .

andrewjoy

13 Mar 2019, 14:25

We need reproduction sun caps for cherry / alps and so on.

Thank thing just looks amazing!

Findecanor

21 Aug 2019, 17:16

I just found out that this keyboard had been issued with the SparcStation Voyager — a compact all-in-one with built-in flat-panel display, which was rare back in 1994, at least at its sizes: (1024×728 in colour, 1152×900 monochrome). It must have been an expensive machine even for a SparcStation and it was marketed towards the finance sector.
I saw the machine at a trade show back in the day, and found it super-sexy. I still think it is the best-looking all-in-one ever.
voyager.gif
voyager.gif (81.56 KiB) Viewed 6485 times
I found a document about it and read that it was intended to be not just compact but also somewhat portable.
It mentions that the reason why it had a ball mouse instead of Sun's typical optical mouse (from Mouse Systems, with special mouse pad) was for this portability: it wouldn't be unusable if you had forgotten to bring the mouse pad.
It also had an IR port, PCMCIA and you could replace the PSU with a battery.

Post Reply

Return to “Gallery”