BenQ 6312-TA

[funglers]

I found this treasure in the garbage...

014.JPG (442.97 KiB) Viewed 6820 times

008.JPG (416.73 KiB) Viewed 6820 times

010.JPG (456.43 KiB) Viewed 6820 times

It's a BenQ 6312-TA spanish prfile with Acer keyswitches

002.JPG (489.75 KiB) Viewed 6820 times

003.JPG (545.5 KiB) Viewed 6820 times

The keycaps are lasered

006.JPG (373.97 KiB) Viewed 6820 times

007.JPG (398.61 KiB) Viewed 6820 times

And the home keys look like this

016.JPG (362.51 KiB) Viewed 6820 times

The keyboard is compact and well build, the keys are clicky and tactile, so I'm starting to love this little one, but it doesn't work. I tested the connectivities with a multimeter, but I can't fins any error. One possibility is that this keyboard can't work on a Win7, and the other is that this one simply died.

[rodtang]

Might just be a dead controller, do you have a pic of the controller?

[domin8r]

Do the leds light up during booting at all?

[ndp]

This is an acer rebranded keyboard. Very sturdy and quite pleasant to type on.

[rodtang]

Here is one on ebay.co.uk

[javifast]

Nice keyboard Funglers. I have some of them and they are very pleasant to type on.

[Charlie_Brown_MX]

Those switches look like ALPS knock-offs. Are they compatible? The stems certainly lead me to believe they would be.

[rodtang]

Those switches look like ALPS knock-offs. Are they compatible? The stems certainly lead me to believe they would be.

Acer switches, they're compatible.

[funglers]

After cleaning up the inside of the board it worked angain, just to find out that some of the keys doens't work at all; the circuit board seems to be fine, but the circuit sheets are burned:

003.JPG (574.67 KiB) Viewed 6679 times

004.JPG (395.7 KiB) Viewed 6679 times

005.JPG (537.76 KiB) Viewed 6679 times

It's a shame, because it's very pleasant to type on it...

[Ascaii]

I am sending MrInterface two acer boards, which he will be taking apart for the switches. Perhaps you can talk him into sending you one of the controller boards.

[kint]

In the past I had some success lightly sanding the lead surface on rubberdome sheets. However those were not that burned and mostyl intersections were troubled. Maybe worth a try.

[Icarium]

I am sending MrInterface two acer boards, which he will be taking apart for the switches. Perhaps you can talk him into sending you one of the controller boards.

Just send a board to the OP and he should send his to MrI.