Kuritakey brand M0110 Rejuvenation PCB

User avatar
soyuz

22 Oct 2021, 20:15

Fresh from the annals of the Keyboard Institute...
m0110.png
m0110.png (200.8 KiB) Viewed 9405 times
A faithful re-creation of the M0110 PCB, single-sided on CEM-1, with accurate markings and a silly cable system to preserve the external appearance of the keyboard.

Status
On sale NOW at kuritakey.store - Until December 1st

Features
  • Supports ANSI and ISO layouts
  • CEM-1 PCB substrate to preserve acoustic properties
  • Accurate markings in the copper layer - no silkscreen!
  • Similar solder mask color to the original
  • Pro Micro MCU
  • Preserves keyboard appearance with some smart cable chopping and re-use of the original 4p4c connector - same pinout as the M0110A PCB
  • N-Key Rollover - through-hole diodes only
  • QMK and VIA firmware
Pictures
kicad_RYaDGWFkiI.png
kicad_RYaDGWFkiI.png (103.87 KiB) Viewed 9405 times
kicad_Zpds953QU1.png
kicad_Zpds953QU1.png (108.13 KiB) Viewed 9405 times
Last edited by soyuz on 13 Nov 2021, 18:40, edited 2 times in total.

mode1ace

22 Oct 2021, 20:21

Nice, my M0110B is ready!

inozenz

22 Oct 2021, 20:31

soyuz wrote:
22 Oct 2021, 20:15
Fresh from the annals of the Keyboard Institute...
m0110.png

A faithful re-creation of the M0110 PCB, single-sided on CEM-1, with accurate markings and a silly cable system to preserve the external appearance of the keyboard.

Status
Ordering prototypes soon

Features
  • Supports ANSI and ISO layouts
  • CEM-1 PCB substrate to preserve acoustic properties
  • Accurate markings in the copper layer - no silkscreen!
  • Similar solder mask color to the original
  • Pro Micro MCU
  • Preserves keyboard appearance with some smart cable chopping and re-use of the original 4p4c connector - same pinout as the M0110A PCB
  • N-Key Rollover - through-hole diodes only
  • QMK and VIA firmware
Pictures
kicad_RYaDGWFkiI.png
kicad_Zpds953QU1.png
I love you and I want one!

User avatar
soyuz

23 Oct 2021, 03:25

Ordered prototypes

User avatar
soyuz

08 Nov 2021, 19:48

Protos are here! Some minor revisions to work in, as always with first revision, but 100% workable prototypes this time. The main issue is the inability to replicate the plated through holes that were there for the 4p4c connector on the original PCB, so will add a workaround for this, and pro micro placement is a bit off. I'll probably pick a different finish for the final product as well.
Attachments
20211108_194551.jpg
20211108_194551.jpg (3.3 MiB) Viewed 9146 times
20211108_194539.jpg
20211108_194539.jpg (3.27 MiB) Viewed 9146 times

inozenz

09 Nov 2021, 15:38

gimme quick!!!!

User avatar
soyuz

13 Nov 2021, 14:19

Can confirm, having assembled this, that the acoustic qualities are excellent. Will be moving towards opening orders very shortly

User avatar
jsheradin

13 Nov 2021, 18:12

It's probably too late but I wonder if it would be worth adding a socket for the Adafruit Feather 32u4 Bluefruit LE. The board supports QMK out of the box, has bluetooth, and onboard battery management. There's plenty of room in the case for some sizeable batteries.

I did a handwired one that I absolutely love: viewtopic.php?f=7&t=24940

User avatar
soyuz

13 Nov 2021, 18:33

it is indeed too late

User avatar
soyuz

13 Nov 2021, 18:36


Post Reply

Return to “Workshop”