deskthority

Hello! I'm currently trying to revive an DC 2014 but with no success. After reading countless posts about this board and it's infamous reset line I thought it was an easy job but got no luck.

This is what I managed to do so far.

Flashed a pro micro with Soarer_at2usb_v1.12_atmega32u4 using QMK
Soldered cables in GRD, 2, 3, VCC, 10 pins. Connect the pro micro with the keyboard. In QMK got the famous R05 error. Try to reset the PC, unplug the keyboard and all those combinations but still no luck.

Recheck wiring, seems to be OK. Get frustrated and write a post in DT asking for help.

Have anyone managed to get up and running this board after getting any of this errors? Any help is appreciated.
~Please Help~

Referenced Posts.
https://geekhack.org/index.php?topic=83404.0
https://klikkyklik.wordpress.com/2016/04/20/dc-2014/
viewtopic.php?f=7&t=8448&start=30
https://geekhack.org/index.php?topic=17 ... msg1501460
https://geekhack.org/index.php?topic=17458.500
viewtopic.php?f=7&t=4567&start=

Two things:

• You did flash your pro micro with Arakula’s modified firmware, right?
• Two blue wires? Are you sure they’re not swapped?

Yes µ but finally got it working with TMK! Works great now.
Thanks for PlacafromHell, KarlMartin95 and Headphone_Jack for helping me out!

So did Arakula’s not work? Just curious for future reference. People will ask this again.