Page 1 of 1

Question: Blue Switch with o-rings quiet enough??

Posted: 26 Aug 2012, 17:36
by NickJ
Hello folks, about to get my first mechanical keyboard~ yay :D
blues boards are a whole lot of satisfaction, and i want them so much~
just wondered if blue boards with o-rings will be quiet enough for typing in the office
don't wanna get someone angry~ :roll:

Posted: 26 Aug 2012, 17:40
by HzFaq
O-rings only change the bottom out sound, the noise from blues come from the jumping bean thing in the stem so o-rings wouldn't change the amount of noise the switches make.

Posted: 27 Aug 2012, 09:13
by NickJ
hmm~ i usually bottom our a lot (using a membrane keyboard right now...), will canceling the bottoming out noise make a big difference to the overall ?

Posted: 27 Aug 2012, 09:15
by NickJ
if o-rings don't make big difference, i'll go with the browns~

Posted: 27 Aug 2012, 20:25
by Icarium
IMHO it's not a big difference but I don't have one of those sound measuring devices. I assume most other people don't either which is why there isn't much response. Sorry. There are videos on youtube of people trying o-rings iirc. Let me check.... Maybe this helps? http://youtu.be/79rWQ-CU9Lw

Posted: 27 Aug 2012, 21:18
by Findecanor
NickJ wrote:hmm~ i usually bottom our a lot (using a membrane keyboard right now...), will canceling the bottoming out noise make a big difference to the overall ?
Many people find that their typing style changes when they change to a keyboard with another type of switch, so you may not bottom out on this keyboard as much as before.
Bottoming out on the Cherry Blues does make a lot more noise than bottoming out on dampened Blues. I use dampened blues a lot, and my first Phantom (that I hope to be able to build soon ...) will have dampened blues too, but that is mostly because I don't like the noise of occasionally bottoming out Cherry switches, not because I have to avoid disturbing someone else.
I would select another switch for the office, though. People are so spoiled and sensitive these days. People did not use to complain about typewriter noise in my parents' generation, and that was a lot louder.

Posted: 28 Aug 2012, 08:54
by NickJ
thx for the advice guys, i'll probably buy a blue board and test it in the office environment first, if it doesn't work out, then i'll use it at home, and place my membrane there~