Page 1 of 1
LEDs for Tesoro Durandal Ultimate G1NL
Posted: 05 Aug 2013, 21:22
by biosmanager
Hey guys!
I'm looking for matching LEDs for a Tesoro Durandal Ultimate G1NL keyboard. I only found out about 3 mm diameter. Do you know matching items with specific values for that KB?
Re: LEDs for Tesoro Durandal Ultimate G1NL
Posted: 10 Aug 2013, 19:36
by biosmanager
I really need that information so I bump this topic
sorry
Posted: 10 Aug 2013, 20:32
by Jmneuv
Just try a pack of normal ones like these:
http://www.ebay.com/itm/261079647496
They're cheap, so not much harm if they don't work.
Green for instance has a bit higher voltage (around the same as white ones): they won't be extremely bright, but probably just (b)right ;p
I used 3mm and had to file down every single one of them.. they were too thick, too tall and i had to give them an angle for the low cherry caps.. so 1.8mm highly recommended. 1.8mm have the same leg spacing as 3mm, so they will fit.
if you own a dremel the 3mm's shouldn't be much of a challenge however;
rectangular 2x3x4mm ones might fit more easily, haven't tried them myself though:
http://www.ebay.com/itm/390559565687
tl;dr:
just grab some common ones off ebay for 5-10$ for 100pcs, voltage in the 3V range