deskthority

Hello everyone. I have a late '85 Model F terminal board that I'm trying to restore and I'm needing about 10 sets of barrels, springs, and hammers. So I have 2 questions:

1.) I believe from my research that barrels and springs from the XT Model F are not compatible with later AT and Terminal Model Fs. Is that true?
2.) Does anyone have any spares to sale?

Thanks!

1.) I believe from my research that barrels and springs from the XT Model F are not compatible with later AT and Terminal Model Fs. Is that true?

The springs and pivot plates should be interchangable, but the barrels wont be. The barrels on the older Model Fs (the 83-keys, 75-keys and 87-keys and possibly some of the more obscure early variants) have a stub below the barrel to hold them in place. The ATs and 122-keys don't have this stub, but instead there is a tab attached to the bottom right hand side of the barrel.