I'm not really an IBM collector, but this is pretty rare (and I have two of them
These were basically the first word processors released around 1973. While I don't have the Mag Card reader/writer cabinet. I do have some of the the mag cards, I'll try to take some pics later. Each mag card held up to 8000 characters, or about 2.5 pages of words.
It's a Selectric with data out! So technically I can convert it to USB
The only reason I haven't done it yet is due to the sheer number of wires (and finding a mating connector so I don't have to destroy the massive cable...).
Inside, the wires control inputs, such as solenoids and electromagnets. The outputs are magnetic reed switches and a few optical sensors to detect rotation. There are some lock and pushbutton switches on the sides to control the Mag Card unit directly as well.
DSC_1222 by triplehaata, on Flickr
DSC_0020 by triplehaata, on Flickr
DSC_0023 by triplehaata, on Flickr
DSC_1207 by triplehaata, on Flickr
DSC_1208 by triplehaata, on Flickr
DSC_1210 by triplehaata, on Flickr
DSC_1224 by triplehaata, on Flickr
DSC_0021 by triplehaata, on Flickr
DSC_1221 by triplehaata, on Flickr
DSC_1165 by triplehaata, on Flickr
DSC_1148 by triplehaata, on Flickr
DSC_1150 by triplehaata, on Flickr
IBM Mag Card II
- HaaTa
- Master Kiibohd Hunter
- Location: San Jose, California, USA
- Main keyboard: Depends the day
- Main mouse: CST L-TracX
- Favorite switch: Fujitsu Leaf Spring/Topre/BS/Super Alps
- DT Pro Member: 0006
- Contact:
-
- Main keyboard: CM Storm Quickfire Rapid (MX Red)
- Main mouse: Logitech G502
- Favorite switch: Buckling Springs
- DT Pro Member: -
DEM SOUNDSSSSSSSSSS!!!!!
- Touch_It
- Location: Nebraska, United States.
- Main keyboard: Unicomp Classic USB 103 key (work) IBM F 4704 107
- Main mouse: Logitech g502 Proteus Core
- Favorite switch: Buckling spring (yet to try Beam Spring)
- DT Pro Member: -
Those sounds, they turn me on. Would this be similar to how a beamspring would sound (when typing). At any rate I loved the video .
- bhtooefr
- Location: Newark, OH, USA
- Main keyboard: TEX Shinobi
- Main mouse: TrackPoint IV
- Favorite switch: IBM Selectric (not a switch, I know)
- DT Pro Member: 0056
- Contact:
Not at all like a beam spring.
This one doesn't sound particularly happy to me (a lot of those noises you're hearing are the motor and drivetrain, and that's noiser and less consistent than I'd normally expect - I hope the nylon main gear is good), from my limited experience with Selectrics... and what's with the print mechanism not responding at all? (I'm not familiar with the Mag machines. I do know that it at least means the drivetrain is WORKING, because the keyboard wouldn't be working right if the drivetrain weren't.)
The beam springs sound like this:
This one doesn't sound particularly happy to me (a lot of those noises you're hearing are the motor and drivetrain, and that's noiser and less consistent than I'd normally expect - I hope the nylon main gear is good), from my limited experience with Selectrics... and what's with the print mechanism not responding at all? (I'm not familiar with the Mag machines. I do know that it at least means the drivetrain is WORKING, because the keyboard wouldn't be working right if the drivetrain weren't.)
The beam springs sound like this:
- HaaTa
- Master Kiibohd Hunter
- Location: San Jose, California, USA
- Main keyboard: Depends the day
- Main mouse: CST L-TracX
- Favorite switch: Fujitsu Leaf Spring/Topre/BS/Super Alps
- DT Pro Member: 0006
- Contact:
Yeah, the Mag Card needs quite a bit of maintenance (I don't really have time to do it right now).
I believe the print mechanism has to be activated by the Mag Card interface. There's like a solenoid or electromagnet that has to be activated, though I haven't figured out which one yet.
I believe the print mechanism has to be activated by the Mag Card interface. There's like a solenoid or electromagnet that has to be activated, though I haven't figured out which one yet.
- seebart
- Offtopicthority Instigator
- Location: Germany
- Main keyboard: Rotation
- Main mouse: Steelseries Sensei
- Favorite switch: IBM capacitive buckling spring
- DT Pro Member: 0061
- Contact:
what a beast! 10kg? Very impressive.